RMweb Gold ChrisN Posted September 10, 2023 RMweb Gold Share Posted September 10, 2023 14 hours ago, MrWolf said: That's interesting, are the solebars laminated in some way? Rob, If you search ;Dean Bogie' on my thread you will find links to the build, and it has pictures. The sides of the bogie are laminated, the solebars are just added to it and the top is a piece of 40 thou plasticard. Although I have not yet attached it to anything the method I have used is copied from people who have. 2 1 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted September 10, 2023 RMweb Gold Share Posted September 10, 2023 (edited) 10 hours ago, MrWolf said: You're right and I don't take chances with my eyesight, although I've had a couple of near misses and it makes me cringe seeing people using angle grinders etc without safety glasses. Yes, don't be the muppet using his lathe to turn some steel, halfway through the job thinking "maybe I should put my safety glasses on" and then seconds later seeing a slow motion vapour trail heading right for their eye. Luckily it was steel, Igrabbed one of my welding magents stuck to the dexion racking in my workshop and the chip of steel pinged out of my eye. It still hurt like f#@% though. I don't think ally would have been easy to get out. Now I always remember to don glasses first. Edited September 10, 2023 by 57xx 15 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted September 10, 2023 RMweb Gold Share Posted September 10, 2023 Eyes are the topic in this house too. Marion has Glaucoma but not too serious yet. She also has cataracts one was dealt with on Tuesday the other will be done this Tuesday. Currently the two eyes are fighting as the focal lengths are different. Her glasses are right for the one still to be done but the other could see better. Some glasses will be needed going on as they cannot get both near and far vision right but that will need to wait some weeks until the eyes get used to the new lenses. Don 16 Link to post Share on other sites More sharing options...
MrWolf Posted September 11, 2023 Author Share Posted September 11, 2023 On 10/09/2023 at 09:40, 57xx said: Yes, don't be the muppet using his lathe to turn some steel, halfway through the job thinking "maybe I should put my safety glasses on" and then seconds later seeing a slow motion vapour trail heading right for their eye. Luckily it was steel, Igrabbed one of my welding magents stuck to the dexion racking in my workshop and the chip of steel pinged out of my eye. It still hurt like f#@% though. I don't think ally would have been easy to get out. Now I always remember to don glasses first. I've had a piece of metal properly stuck in my eye once, I'd been wearing a face screen and was fine until I brushed the muck out of my hair. They put your head in a kind of vice in hospital with a big magnifier in front of it, so the probe that pulls out the bit of metal looks like a scaffolding pole. Not good. On 10/09/2023 at 21:45, Donw said: Eyes are the topic in this house too. Marion has Glaucoma but not too serious yet. She also has cataracts one was dealt with on Tuesday the other will be done this Tuesday. Currently the two eyes are fighting as the focal lengths are different. Her glasses are right for the one still to be done but the other could see better. Some glasses will be needed going on as they cannot get both near and far vision right but that will need to wait some weeks until the eyes get used to the new lenses. Don My mother had one removed last year, she'd been due to have it done but lockdown got in the way, but it's apparently made a big difference. 9 Link to post Share on other sites More sharing options...
MrWolf Posted September 11, 2023 Author Share Posted September 11, 2023 Progress now I can see properly again, but nothing very exciting. Lots and lots of seats. Some of the used seat mouldings had been painted blue, VW Indian Blue if I had to guess. Does anyone know what basic colours the seats were, late 19th century 1st, 2nd and 3rd class on the GWR? Also 3rd on the Midland Railway? 14 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted September 12, 2023 RMweb Premium Share Posted September 12, 2023 8 hours ago, MrWolf said: Also 3rd on the Midland Railway? Trick question, I think. 'Third class accommodation in clerestory and other carriages built from 1897 onwards was upholstered with moquette, often figured and not always crimson; in 1912 a dark blue and yellow one was used. In 1900 there is mention of "backs of monogram moquette" and in 1913 of "figured velvet crimson and black No. 3 pattern".' Midland Style, pp. 116-7. To my mind "not always crimson" implies that crimson was the usual colour. Some monochrome examples: 6-wheel composite No. 901, photographed c. 1892 (higher seat backs introduced that year): [Embedded link to catalogue thumbnail of MRSC 64105.] Clerestory non-corridor composite No. 3636, built 1903, photographed c, 1906-7: [Embedded link to catalogue thumbnail of MRSC 65001.] Elliptical-roof corridor third No. 1348, c. 1922: [Embedded link to catalogue thumbnail of MRSC 64220.] The NRM's interpretation; the 6-wheel composite restored as No. 901 (using the above photo as reference) though original number unknown: [Embedded link: James E. Petts / Wikimedia Commons.] 7 1 2 Link to post Share on other sites More sharing options...
MrWolf Posted September 12, 2023 Author Share Posted September 12, 2023 Thank you @Compound2632 for a very comprehensive answer. I think that I can risk Crimson on the ex MSWJR / MR brake third. That one is nearest to complete too. 3 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted September 12, 2023 RMweb Premium Share Posted September 12, 2023 3 minutes ago, MrWolf said: I think that I can risk Crimson on the ex MSWJR / MR brake third That being a vehicle which was contemporary with the 6-wheel composite illustrated. 2 1 Link to post Share on other sites More sharing options...
Andy WD Posted September 13, 2023 Share Posted September 13, 2023 On 11/09/2023 at 23:46, MrWolf said: I've had a piece of metal properly stuck in my eye once, I'd been wearing a face screen and was fine until I brushed the muck out of my hair. They put your head in a kind of vice in hospital with a big magnifier in front of it, so the probe that pulls out the bit of metal looks like a scaffolding pole. Not good. My mother had one removed last year, she'd been due to have it done but lockdown got in the way, but it's apparently made a big difference. I managed to get swarf in my eye during basic trade training...like an idiot. After seeing the M.O. and having the offending article removed I was told to wear an eyepatch. The Medical Commander saw it and told the MO to "take the damn thing off as we may be Navy but we're not bloody pirates" :) I can recommend having your cataract removed. Absolutely amazing! Although all the colours look wrong now....white is REALLY white....!! 9 1 Link to post Share on other sites More sharing options...
RMweb Gold ChrisN Posted September 14, 2023 RMweb Gold Share Posted September 14, 2023 I do not have my own laptop at the moment, and my internet is extremely flakey but when it sorts itself out I will post more about seat colours, although @Compound2632 may have covered it all, and will also post links to the Dean Bogie in a way they are easy to find. 2 1 Link to post Share on other sites More sharing options...
MrWolf Posted September 14, 2023 Author Share Posted September 14, 2023 Thank you, that would be much appreciated. I have found amongst my junk, a white metal 6'4" bogie, there must be another somewhere. I think that it's one of the very old and no longer available items from 247 Developments. 3 Link to post Share on other sites More sharing options...
Popular Post MrWolf Posted September 16, 2023 Author Popular Post Share Posted September 16, 2023 I've been doing a little late night modelling, we were watching a film but the Memsahib fell asleep about an hour in. I'm not going to wake her up, as I don't have a stick long enough to do it safely... I've found the missing 6'4" bogiie, two down, eight to go. Also these which appear to be the 6'8" version and if I can get the horrible frothy brown glue off... I've been busy cutting out more partitions and cutting the various bits of Ratio coach seating to length. Also in the picture is another 1950s relic I've acquired. Too modern and too big for the layout, but I just like it. It's a model of an early attempt at an electric lorry by Hindle Smart, (Actually something that I think is a good idea. Deliver to local hubs by train and the last couple of miles to the shops by electric 3 ton truck.) they were based on the little 1172cc petrol Jensen (Yes, that Jensen.) Jen-Tug. Attaching bits of seat squarely to partitions. The ends were given a quick coat of dark earth as they're visible through the windows and fitted to the coach. Although I will be painting the seats an appropriate colour, I won't be going mad with further detailing as once the roof is on, you can barely see inside. The main reason for fitting what I have is to give the impression that there is something inside and so that you can't see into one compartment and through another. 20 3 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 16, 2023 RMweb Premium Share Posted September 16, 2023 17 minutes ago, MrWolf said: The main reason for fitting what I have is to give the impression that there is something inside and so that you can't see into one compartment and through another. The old K's E116 B Set kit has neither floor nor partitions as supplied, so I added those, without seats, and painted it all black for that reason. You can't see whether there are seats or not. 2 1 2 Link to post Share on other sites More sharing options...
wiggoforgold Posted September 16, 2023 Share Posted September 16, 2023 Is the lorry an old Dublo Dinky model? 1 Link to post Share on other sites More sharing options...
MrWolf Posted September 16, 2023 Author Share Posted September 16, 2023 6 hours ago, wiggoforgold said: Is the lorry an old Dublo Dinky model? Afraid not, it's a regular O scale model made from 1953-59. I suspect that if it were OO, many would have been detailed, glazed and probably received a wheel swap. They're not one of those models that fetch silly money, that one cost me £9. Below is an illustrated list of all Dublo Dinky models. There's a number of commercials, including an artic flatbed based on the 1952-59 Bedford A type: http://rodgersantiques.co.uk/?p=2839 3 2 1 Link to post Share on other sites More sharing options...
RMweb Gold ChrisN Posted September 17, 2023 RMweb Gold Share Posted September 17, 2023 Here is a copy from Harris, which lists the interiors from 1890 to 1950. Hope this helps. 2 1 8 Link to post Share on other sites More sharing options...
MrWolf Posted September 17, 2023 Author Share Posted September 17, 2023 (edited) 7 hours ago, ChrisN said: Here is a copy from Harris, which lists the interiors from 1890 to 1950. Hope this helps. Thanks Chris, it's looking like Crimson for first and second class, fawn for steerage class. This is a sample of Crimson plush chenille fabric, which is inspired by the Midland Railway sample posted by @Compound2632, I'll mix up a little acrylic like that for the GWR vehicles and try to get as close to the coach photo for the ex Midland Railway/ MSWJR coach. Not that the shade difference will be noticeable with the roof on! Edited September 17, 2023 by MrWolf Picture no load. 9 Link to post Share on other sites More sharing options...
MrWolf Posted September 19, 2023 Author Share Posted September 19, 2023 The problem with clicking carelessly on these pages is that it often leads to temptation: https://rapidotrains.co.uk/product/dia-e140-b-set-gwr-shirtbutton-livery/ These I have no doubt will be far superior to the last RTR offering, (Something that gets slated for its inaccuracies, but let's not forget it was forty five years ago and they were like something from another planet at the time.) I have had a good look at the unpainted prototype pictures and I'm sure that they will sell out. That said, I have several mint Airfix versions I couldn't sell and I can't really justify / afford the asking price, particularly as the Memsahib's current job is possibly as much learning as it is earning. About a thousand years ago it seems, I did take a marquetry chisel to all those fictional door handle surrounds, block off a window IIRC and add some underframe details to a pair of B sets. I think that there was a how to article in one of the monthly comics, but I'm not 100% certain. 5 3 Link to post Share on other sites More sharing options...
Winslow Boy Posted September 19, 2023 Share Posted September 19, 2023 They do look exquisite Rob but at that price I would expect them to be. I suspect/know that I'm turning into a crusty old skin flint. 2 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 (edited) 2 hours ago, MrWolf said: The problem with clicking carelessly on these pages is that it often leads to temptation: https://rapidotrains.co.uk/product/dia-e140-b-set-gwr-shirtbutton-livery/ These I have no doubt will be far superior to the last RTR offering, (Something that gets slated for its inaccuracies, but let's not forget it was forty five years ago and they were like something from another planet at the time.) I have had a good look at the unpainted prototype pictures and I'm sure that they will sell out. That said, I have several mint Airfix versions I couldn't sell and I can't really justify / afford the asking price, particularly as the Memsahib's current job is possibly as much learning as it is earning. About a thousand years ago it seems, I did take a marquetry chisel to all those fictional door handle surrounds, block off a window IIRC and add some underframe details to a pair of B sets. I think that there was a how to article in one of the monthly comics, but I'm not 100% certain. That B-set does look superb, but it's about twice what I'd comfortably pay for a coach. I'm not saying they aren't worth it (excuse the poor English), just that it's more than I would want to spend. Also, I'd be terrified of handling the things in case I broke something off! A bit like the AS Manor. And finally, they would make all the other stock on my layout look glaringly inferior... Edited September 19, 2023 by Graham T 1 3 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted September 19, 2023 Author Share Posted September 19, 2023 19 minutes ago, Winslow Boy said: They do look exquisite Rob but at that price I would expect them to be. Definitely. Coaches have always been (understandably) at a premium, but they have really jumped in recent years. 19 minutes ago, Winslow Boy said: I suspect/know that I'm turning into a crusty old skin flint. No, you still have your warped sense of humour, as do I. It's a very useful coping mechanism when you're as poor as a crow.... 2 1 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted September 19, 2023 Author Share Posted September 19, 2023 7 minutes ago, Graham T said: That B-set does look superb, but it's about twice what I'd comfortably pay for a coach. I'm not saying they aren't worth it (excuse the poor English), just that it's more than I would want to spend. Agreed. I have a budget for my modelling and I have to stick with it and keep things in proportion. I consider myself very lucky to be able to keep trains and motorcycles as a hobby. I know plenty of chaps who earn more than me who have had to give up everything to fund big houses, furniture, holidays, three children etc... 7 minutes ago, Graham T said: Also, I'd be terrified of handling the things in case I broke something off! A bit like the ASA Manor. My Bachmann Dukedog makes me nervous enough, especially as I have a tendency to drop things when my dodgy hand suddenly decides to catch me out. 7 minutes ago, Graham T said: And finally, they would make all the other stock on my layout look glaringly inferior... Likewise. All of my coaching stock is either Airfix, Mainline or sawn up Tri-ang. But I'm working on them all! 4 6 Link to post Share on other sites More sharing options...
RMweb Gold ChrisN Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 (edited) I had mentioned my 6ft 4" Dean Bogie, and in answer to a question about it I said, rather rudely I think, 'search my thread'. My excuse is that I had not been well, but I felt I should gather together all the links to when I built mine onto a Word document. The document is here on my thread. That way I will not clutter this one up and I will know how much, if any interest there is in it. Disclaimer: I know it runs smoothly as a bogie, but I have not yet put one, or even two under anything and seen that it actually works. Edited September 19, 2023 by ChrisN 4 1 Link to post Share on other sites More sharing options...
RMweb Premium John Besley Posted September 20, 2023 RMweb Premium Share Posted September 20, 2023 (edited) When are you starting on your interesting collection of steam locos...? You'll need them soon to haul that nice mix of coaching stock Edited September 20, 2023 by John Besley Link to post Share on other sites More sharing options...
MrWolf Posted September 20, 2023 Author Share Posted September 20, 2023 16 hours ago, ChrisN said: I had mentioned my 6ft 4" Dean Bogie, and in answer to a question about it I said, rather rudely I think, 'search my thread'. My excuse is that I had not been well, but I felt I should gather together all the links to when I built mine onto a Word document. The document is here on my thread. That way I will not clutter this one up and I will know how much, if any interest there is in it. Disclaimer: I know it runs smoothly as a bogie, but I have not yet put one, or even two under anything and seen that it actually works. Not at all, I'm not certain how to search within a topic though, perhaps it's not a feature of the mobile friendly version? My mobile won't open the DocX, just to annoy me...😄 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now