big T Posted April 7, 2017 Share Posted April 7, 2017 (edited) Hi Peter I agree with the others - that Spoon is looking good, and that ballast formation looks the business, especially with the different heights of the dogs and cats. Top drawer as usual! Trev Edited April 7, 2017 by big T 1 Link to post Share on other sites More sharing options...
RBE Posted April 7, 2017 Share Posted April 7, 2017 Looks great Peter, I actually like the differing ballast colours the new work has introduced. I wouldn't blend it in too much if it were me. Then again the two tone ballast is a bit of a trademark of mine! Link to post Share on other sites More sharing options...
Marcus 37 Posted April 7, 2017 Share Posted April 7, 2017 Hi Peter That's looking really good now. I have to agree with Cav about the ballast. It does actually look as if some engineering work has taken place, especially with the ballast on top of the sleepers. The two ballast trains standing there in the platform create the perfect picture. Top work indeed. Cheers Marcus Link to post Share on other sites More sharing options...
P.C.M Posted April 7, 2017 Author Share Posted April 7, 2017 Thanks for the feedback guys, always appreciated. The ballast train is made up from Heljan and Cambrian Dogfish Cambrian Catfish Cambrian Shark and Lima Sealions. I was always quite happy with my ballast weathering until I saw a few layouts on RMweb that took it in my opinion to a better level. One of these layouts was Cavs. I think mine in some places is too dirty which I tried to improve when I did the extension a few years back, I still think I went to far and the station area will still probably be quite dirty but I hope to have more lighter area's than what used to be there. Plus I still need to make it fit in with the rest. The next layout will have the ballast done in a different way but that's a while off at the moment. Cheers Peter. Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted April 7, 2017 RMweb Premium Share Posted April 7, 2017 Peter I have always thought of your ballasting as being well executed with the right size product, especially compared with mine which uses over-scale Woodland "medium". As to colour we all know this varies hugely mot just according to region and rock source used for the ballast but dependant upon whether a high-speed main line with minimal ash or oil-drop (though turds and bog-roll might appear at random intervals) to terminal lines where locos would stand for extended times and soil the ballast turning it black and slimy. I have tried to replicate that by use of varied strengths of water-colour wash and use of weathering powders. I've even squeezed neat black paint from the tube onto the sleepers to represent really claggy oil drop at a signal. Some areas might be too dark but mostly I reckon it's OK. Yours looks fine given the amount of oil drop in station platform areas. Link to post Share on other sites More sharing options...
bescotbeast Posted April 7, 2017 Share Posted April 7, 2017 Thanks for the feedback guys, always appreciated. The ballast train is made up from Heljan and Cambrian Dogfish Cambrian Catfish Cambrian Shark and Lima Sealions. I was always quite happy with my ballast weathering until I saw a few layouts on RMweb that took it in my opinion to a better level. One of these layouts was Cavs. I think mine in some places is too dirty which I tried to improve when I did the extension a few years back, I still think I went to far and the station area will still probably be quite dirty but I hope to have more lighter area's than what used to be there. Plus I still need to make it fit in with the rest. The next layout will have the ballast done in a different way but that's a while off at the moment. Cheers Peter. I wouldn't change a thing Peter, I use Llanbourne as a yard stick for my own stumbling efforts. Link to post Share on other sites More sharing options...
P.C.M Posted April 8, 2017 Author Share Posted April 8, 2017 Peter I have always thought of your ballasting as being well executed with the right size product, especially compared with mine which uses over-scale Woodland "medium". As to colour we all know this varies hugely mot just according to region and rock source used for the ballast but dependant upon whether a high-speed main line with minimal ash or oil-drop (though turds and bog-roll might appear at random intervals) to terminal lines where locos would stand for extended times and soil the ballast turning it black and slimy. I have tried to replicate that by use of varied strengths of water-colour wash and use of weathering powders. I've even squeezed neat black paint from the tube onto the sleepers to represent really claggy oil drop at a signal. Some areas might be too dark but mostly I reckon it's OK. Yours looks fine given the amount of oil drop in station platform areas. Thanks Rick, The most recent ballasting on Llanbourne has been Woodland Scenic's Medium but mixed with a bit of fine. I have used another brand before but I can't remember what it was. I was slightly smaller in size to the Woodlands medium. I think your ballast colour is pretty good to Rick and as you say it can vary a fair bit depending on how old it is how well used it is and what colour it came from the quarry I guess you could say as long as you weather it in some way it can't really be wrong. Cheers Peter. 1 Link to post Share on other sites More sharing options...
P.C.M Posted April 8, 2017 Author Share Posted April 8, 2017 I wouldn't change a thing Peter, I use Llanbourne as a yard stick for my own stumbling efforts. Ha ha I was only looking at your layout the other day and thinking how good it looked. lol Cheers Peter. Link to post Share on other sites More sharing options...
Popular Post P.C.M Posted April 19, 2017 Author Popular Post Share Posted April 19, 2017 Some progress pics on the layout. The ballast is now weathered up and 31145 has bee in the station picking up old rail and sleepers. Cheers Peter. 30 Link to post Share on other sites More sharing options...
vulcan product fan Posted April 19, 2017 Share Posted April 19, 2017 Top work i like the frame and rodding great bits of detail and the 31 look very smart just seen some pic of pairs of peds on the (oil thread) allways thought Railfreight looked the best on them. Nice work pal Link to post Share on other sites More sharing options...
Signaller69 Posted April 19, 2017 Share Posted April 19, 2017 Nice job with the relaying/reballasting and Ground Frame Peter, nothing to suggest it has been altered at all, nice bit of blending in. Regards, Martyn. Link to post Share on other sites More sharing options...
coachmann Posted April 19, 2017 Share Posted April 19, 2017 Folk on the platform look so realistic particularly the two gricers. Link to post Share on other sites More sharing options...
P.C.M Posted April 20, 2017 Author Share Posted April 20, 2017 Folk on the platform look so realistic particularly the two gricers. Thanks Larry, Most of the figures are Bachmann with a few whitemetal ones to add some variety. I can't remember where I got the gricers from there are a few others waiting for a spot on the bridge. Cheers Peter. Link to post Share on other sites More sharing options...
big T Posted April 21, 2017 Share Posted April 21, 2017 Hi Peter, The remedial work looks great. I've always liked your track weathering colours. I like the cheeky pose the driver of the 31 is pulling with one arm on the cab window sill! Very convincing. Top order. Cheers Trev Link to post Share on other sites More sharing options...
MRDBLUE17 Posted April 21, 2017 Share Posted April 21, 2017 Hi Peter, That 31 is superb and a nice little working for it too. Cheers Mark Link to post Share on other sites More sharing options...
P.C.M Posted April 23, 2017 Author Share Posted April 23, 2017 Hi Peter, The remedial work looks great. I've always liked your track weathering colours. I like the cheeky pose the driver of the 31 is pulling with one arm on the cab window sill! Very convincing. Top order. Cheers Trev Thanks Trev, I am happy with the new ballasting it doesn't look too different to the rest. I fit a driver to all of my loco's I find an open window with driver arm or hand hanging out adds to the realism. Cheers Peter. 2 Link to post Share on other sites More sharing options...
P.C.M Posted April 23, 2017 Author Share Posted April 23, 2017 Hi Peter, That 31 is superb and a nice little working for it too. Cheers Mark Thanks Mark, Class 31 were allocated to quite a few Departmental pools during the 80s and 90s so it was a regular sight back in the day. Cheers Peter. Link to post Share on other sites More sharing options...
P.C.M Posted May 2, 2017 Author Share Posted May 2, 2017 For the first time in quite a while I ran some trains on Llanbourne. A visit from Rick aka Gwiwer of Penhale Bay fame came down for one last look at Llanbourne before jetting of to the UK. The pics below show a few pics taken before Rick arrived, the layout ran quite well. But I have a few loco's that need a service and a sound fitted class 47 that only seems to have one speed. Cheers Peter. 14 Link to post Share on other sites More sharing options...
RMweb Premium Gwiwer Posted May 2, 2017 RMweb Premium Share Posted May 2, 2017 Many thanks to Peter for the chance to watch Llanbourne in action one more time. And may I also take this opportunity of thanking Peter, Leanne, Abbie and the various furry members of their family for hosting and refreshing all of us who have visited. Peter has also proved to be a good friend beyond little trains for which thanks are also due from Sharon and myself. 3 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted May 2, 2017 RMweb Premium Share Posted May 2, 2017 For the first time in quite a while I ran some trains on Llanbourne. A visit from Rick aka Gwiwer of Penhale Bay fame came down for one last look at Llanbourne before jetting of to the UK. The pics below show a few pics taken before Rick arrived, the layout ran quite well. But I have a few loco's that need a service and a sound fitted class 47 that only seems to have one speed. Cheers Peter. I had a real one like that at Haymarket. Turned out to be a broken contact in the load regulator that kept the field diverts in circuit continuously (47 210 circa 1979/80 if Waverley West of this parish wants to replicate it...). Link to post Share on other sites More sharing options...
P.C.M Posted May 2, 2017 Author Share Posted May 2, 2017 Many thanks to Peter for the chance to watch Llanbourne in action one more time. And may I also take this opportunity of thanking Peter, Leanne, Abbie and the various furry members of their family for hosting and refreshing all of us who have visited. Peter has also proved to be a good friend beyond little trains for which thanks are also due from Sharon and myself. Thanks Rick that's very kind, It was a pleasure having you down. Cheers Peter. Link to post Share on other sites More sharing options...
P.C.M Posted May 2, 2017 Author Share Posted May 2, 2017 I had a real one like that at Haymarket. Turned out to be a broken contact in the load regulator that kept the field diverts in circuit continuously (47 210 circa 1979/80 if Waverley West of this parish wants to replicate it...). 47636 is the least of my problems at the moment, my railfreight class 31 has developed a squealing noise. I have had in bits twice now and oiled the bearings and still no improvement. I sometimes wonder why I bother with this Hornby rubbish it's such a pain to take these things apart and put them back together again. Cheers Peter. Link to post Share on other sites More sharing options...
Waverley West Posted May 2, 2017 Share Posted May 2, 2017 47636 is the least of my problems at the moment, my railfreight class 31 has developed a squealing noise. I have had in bits twice now and oiled the bearings and still no improvement. I sometimes wonder why I bother with this Hornby rubbish it's such a pain to take these things apart and put them back together again. Cheers Peter. Couldn't agree more, Peter. My Hornby 08, 31, 56s and A4 are all a pain to take apart and, more importantly, put back together again, even for basic servicing (pickup cleaning, lubrication and so on). I find doing the same to a Bachmann or Heljan loco child's play by comparison. Link to post Share on other sites More sharing options...
RMweb Gold MarshLane Posted May 2, 2017 RMweb Gold Share Posted May 2, 2017 47636 is the least of my problems at the moment, my railfreight class 31 has developed a squealing noise. I have had in bits twice now and oiled the bearings and still no improvement. I sometimes wonder why I bother with this Hornby rubbish it's such a pain to take these things apart and put them back together again. Cheers Peter. Sorry to hear your having problems with the 31 Peter - need to get you in to proper locos and get Llanbourne rebuilt in O gauge Rich Link to post Share on other sites More sharing options...
P.C.M Posted May 3, 2017 Author Share Posted May 3, 2017 Couldn't agree more, Peter. My Hornby 08, 31, 56s and A4 are all a pain to take apart and, more importantly, put back together again, even for basic servicing (pickup cleaning, lubrication and so on). I find doing the same to a Bachmann or Heljan loco child's play by comparison. Thanks Dave, I think the Hornby need more looking after too. I am going to try again tonight, may be with light oil rather the grease. Cheers Peter. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now