RMweb Premium Mallard60022 Posted December 4, 2023 RMweb Premium Share Posted December 4, 2023 1 hour ago, 30368 said: Good news Phil. A very good day, axle sideplay as requested. Coupling rods made up and fitted. The chassis runs silently and smoothly despite there being very little clearnce between coupling rods and crankpins. Very pleasing. The two outer coupling rod holes are elongated as supplied so these were closed up be soldering a brass washer on the underside. Coupling rods in two halves. Balance weights fitted too. Ran first time very smoothly with no easing of crankpin holes in coupling rods. Jig assembly always worth the extra effort. Kind regards, Richard I feel guilty now that I hadn't even started the Body and got that prepped. However that chassis looks splendid and isn't it great when the thing just runs well from first try! Thank you. P 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 6, 2023 Author RMweb Premium Share Posted December 6, 2023 Reverted to the T6 build today - I have been busy connecting up the tender and finding spaces to insert chunks of lead in the T6 body and chassis. It is having the desired effect in that 681 can slip and then get away 3 coaches. The thing still needs a lot more lead to improve the very limited traction. The lining on 681 is rather poor and incomplete. The first time that I have used a lining pen and it shows. I have asked if one of the fairly well known transfer suppliers can produce some bespoke lining transfers - we shall see. Around 35 years development between these two prototypes. Kind regards, 30368 8 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 6, 2023 RMweb Premium Share Posted December 6, 2023 5 minutes ago, 30368 said: Reverted to the T6 build today - I have been busy connecting up the tender and finding spaces to insert chunks of lead in the T6 body and chassis. It is having the desired effect in that 681 can slip and then get away 3 coaches. The thing still needs a lot more lead to improve the very limited traction. The lining on 681 is rather poor and incomplete. The first time that I have used a lining pen and it shows. I have asked if one of the fairly well known transfer suppliers can produce some bespoke lining transfers - we shall see. Around 35 years development between these two prototypes. Kind regards, 30368 On another thread someone has suggested using some sort of substance called 'Bullfrog Snot' as a Traction Tyre for a Schools. Worth a try (on one wheel set...or both?) as it can be removed. Phil 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 6, 2023 Author RMweb Premium Share Posted December 6, 2023 5 minutes ago, Mallard60022 said: On another thread someone has suggested using some sort of substance called 'Bullfrog Snot' as a Traction Tyre for a Schools. Worth a try (on one wheel set...or both?) as it can be removed. Phil Many thanks Phil - nice to know that our hobby is at the forefront of recycling, in this case, Bullfrog Snot. I hope we are not exploiting Lithobates catesbeiana as a result of this discovery? Kind regards, Richard 1 3 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 7, 2023 RMweb Premium Share Posted December 7, 2023 17 hours ago, 30368 said: Many thanks Phil - nice to know that our hobby is at the forefront of recycling, in this case, Bullfrog Snot. I hope we are not exploiting Lithobates catesbeiana as a result of this discovery? Kind regards, Richard No Amphibians were injured during the procedure. P 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 7, 2023 Author RMweb Premium Share Posted December 7, 2023 Final look at T6 No. 681. It now carries enough lead to improve traction and is capable of lifting three coaches with little trouble. It is unlikely to be asked to pull much more! Not one of my best builds but not too bad given where we started. Yes the bogie is off the track accounting for that hound dog look. Kind regards, 30368 12 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted December 7, 2023 RMweb Premium Share Posted December 7, 2023 Definitely up at the back of the loco, you can get away with the loco being lower than the tender (springs sagging) but not this way round. Looks a good job otherwise though, I know what fun Jidenco kits are! Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 7, 2023 Author RMweb Premium Share Posted December 7, 2023 2 hours ago, Michael Edge said: Definitely up at the back of the loco, you can get away with the loco being lower than the tender (springs sagging) but not this way round. Looks a good job otherwise though, I know what fun Jidenco kits are! Thanks Michael, I can correct with washer adjustment and thanks for the comment, much appreciated. All being well will see you on Saturday at the Manchester show. Kind regards, Richard Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 8, 2023 Author RMweb Premium Share Posted December 8, 2023 (edited) Back to Phil's U1 2-6-0. Brake gear assembled and will be fitted in position after pick-ups fitted and painting completed. Also in picture are the two mounting bords for the pickups. I shall probably glue these to the removable brass chassis cover plate. This will facilitate maintenance of the pickups. Kind regards, Richard Edited December 8, 2023 by 30368 7 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 10, 2023 Author RMweb Premium Share Posted December 10, 2023 (edited) The pickup boards have now been fitted into place and trimmed to fit and then glued to the brass chassis cover plate which has been screwed into place. The chassis is now undergoing initial running in. It is very, very silent and the fairly large flywheel gives it a nice prototype like stop. Very pleased with this build so far. The brake gear should fit in very easily. As mentioned above, it runs very smoothly although the gearing is low so this will not be a very fast loco but with all that weight should be able to pull 12 + coaches. I now plan to partially dismantle and paint the frames and wheels. Kind regards, Richard Edited December 10, 2023 by 30368 9 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 11, 2023 RMweb Premium Share Posted December 11, 2023 Looking neat and tidy there R. Good to know that the Motor etc is smooth. Very satisfying. Whoever had it b4 me must have used that mix before. Always easier to move through a build from scratch, rather than have to sort out a previously part built thing like my H15. Looks like there will be plenty of space to stuff lead into the boiler as well? I would put a Decoder Base etc in the smoke box if you want to build to that idea? As an alternative I could stick it in the Tender and use a decent 'Connector' twixt Loco and Tender; not the 'orrible Hornby Plug in type. Thank you again. Phil 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 11, 2023 RMweb Premium Share Posted December 11, 2023 Oops, missed this bit: running speed no issue, as with that 10/11 on as mentioned and a recorded, Platform Stop at SJ in one of my sources, speed is not required with this Engine. Just a view of the 'Ugly bug' front end will be enough to make a satisfying pic! Phil 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 11, 2023 Author RMweb Premium Share Posted December 11, 2023 8 minutes ago, Mallard60022 said: speed is not required with this Engine Phil, It will be a little faster as it goes through its running in phase. As to adding lead, I'm not sure you will need to it will be very heavy anyway with massive frames and a white metal body. Lets see what it will pull when finished. There should be access, via the boiler cut away, to the smokebox for the decoder. Richard 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 11, 2023 Author RMweb Premium Share Posted December 11, 2023 (edited) Today's update. The frames and wheels are now painted and re-assembled and then checked that all is well with some track running. The cylinder castings are glued in position and the motion plate is ready for soldering into the frames. As is usually the case with DJH kits it all goes together well, so far.... A small extra addition from me - the shields over the brake block hanger upper pivot. The U1 has a solid slidebar and not the slotted version fitted to the U class and most LNER outside cylindered locomotives. Kind regards, Richard Edited December 11, 2023 by 30368 8 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 13, 2023 Author RMweb Premium Share Posted December 13, 2023 (edited) Started to assemble the valve gear today. Firstly the connecting rods to the crossheads and slide bars. The crosshead casting needed careful cleaning up having large amounts of casting flash. Now that the cylinders have been partially assembled we start to see Phil's "ugly bug" front end. All the cylinder and crosshead parts ready for assembly. Note that I seem to have left in place a nib on the connecting rod big end oil reservior. This is intentional - there was a large cork stopper on top and the nib represents that. KInd regards, Richard Edited December 13, 2023 by 30368 7 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 Class leave there R. Good little tip to check Oil Points on V.G. Those Cylinders need to go to Weight Watchers. Thanks P 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 14, 2023 Author RMweb Premium Share Posted December 14, 2023 Working on the connecting rods and crossheads today. Firstly the main components. I have soldered an 0.8mm brass pin for the drop link/union link. A 14BA set screw has been soldered to each connecting rod to secure same to crosshead. Connecting rod and crosshead temporarily assembled. Fortunately I noticed the not deliberate mistake. Yes the con rods are upside down..... Connecting rods assembled and awaiting the rest of the valve gear. Assembly runs easily with no sticking points. Kind regards, Richard PS 1 hour ago, Mallard60022 said: Those Cylinders need to go to Weight Watchers. They do look fat but they are smaller than those fitted to the U class, 16" instead of 19". 6 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 You've got the cylinders far too high, centre line should be horizontal and in line with the axle centres. 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 14, 2023 Author RMweb Premium Share Posted December 14, 2023 44 minutes ago, Michael Edge said: You've got the cylinders far too high, centre line should be horizontal and in line with the axle centres. They are a bit too high Michael, about 2mm. However this is governed by the verticle slot in the frames and the corresponding "spigot" on the cylinder casting. I was not too keen to chop it about since it is not my kit. Making it up for a friend. I will see what can be done. Always happy to take advice and guidance. Thanks. Kind regards, Richard 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 1 hour ago, 30368 said: They are a bit too high Michael, about 2mm. However this is governed by the verticle slot in the frames and the corresponding "spigot" on the cylinder casting. I was not too keen to chop it about since it is not my kit. Making it up for a friend. I will see what can be done. Always happy to take advice and guidance. Thanks. Kind regards, Richard I've had a shufty and Mike is correct Richard. There will be a large gap between Cylinder top and Footplate. Do feel free to make an adjustment in some way. I've no problems with hacking! Thanks Phil 1 Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 14, 2023 Author RMweb Premium Share Posted December 14, 2023 9 minutes ago, Mallard60022 said: I've had a shufty and Mike is correct Richard. There will be a large gap between Cylinder top and Footplate. Do feel free to make an adjustment in some way. I've no problems with hacking! Thanks I agree that Michael is correct. The result will, as you said, creat a large gap between cylinder top and footplate valence. I will try to gently remove cylinders from mainframes (Glue buster), reduce the bottom of the spigot and then re-glue. Thanks for your agreement. Kind regards, Richard 1 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 It’s very important to get cylinders in line with axle centres (except in GW 2 cylinder locos), anything else just looks wrong. 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 2 hours ago, Michael Edge said: It’s very important to get cylinders in line with axle centres (except in GW 2 cylinder locos), anything else just looks wrong. I must admit I wouldn't have noticed Mike. However it really looks weird that the kit actually went together like this. I wouldn't have known had I been doing this. I've never seen a U1 kit mentioned on RMWeb, so maybe it's not a common build? I know from someone's Kitbuilding posts, that The DJH S15 has a load of errors. Dave someone. I must have a poke if I can find his threads. Phil 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 It's this thread. Loads of very useful stuff on here Richard. No U1 though as far as I can see. Dave did a handy Index on page 1! https://www.rmweb.co.uk/forums/topic/2359-dlts-sr-locos-lord-nelson-craftsman-kit/#comments 1 Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted December 14, 2023 RMweb Premium Share Posted December 14, 2023 DLT hasn't posted since mid September so I hope he's OK? Phil 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now