SleepyWolf Posted May 18, 2020 Share Posted May 18, 2020 I'm trying to motorize a Hornby 4 wheel coach to propel an engine that is unable to be motorized itself. is there an easy way to do this? I have looked at mounting the body on a class 91 bogey. any help is appreciated. Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted May 18, 2020 RMweb Gold Share Posted May 18, 2020 What is the unmotorised loco? If it is designed to have a motor this might be an easier way to go, and it will not have to be permacoupled to the unrealistic coach. If you have to motorise the coach, you’ll need to apply some fairly savage surgery to it. You’ll only be able to retain the coach side frames if your intended power bogie has the same wheelbase, so that the wheels line up with the axleboxes, and of course the mechanism will be visible through the windows. The coach floor has to be cut away, and you will have to fabricate, probably from sheet plastic, a method of supporting it’s body on the bogie. The bogie is designed to pivot in the loco frame or bodyshell, so it will not have mounting points at the right places, and the coach must be mounted square and upright on it, at the right height so that it’s buffers and couplings are compatible with the rest of your stock, including of course the loco you want to push around with it. Some loco power bogies have pickups on one side only, return being by the dummy bogie, and this may be an issue as well. It can be done, of course, anything can with enough determination, but my view is that it is not the best way to go about things and that you’d be better advised to motorise the loco. Link to post Share on other sites More sharing options...
SleepyWolf Posted May 18, 2020 Author Share Posted May 18, 2020 from https://www.shapeways.com/product/HT9TTQ7UW/london-blackwall-railway-2-2-2wt-modernised?optionId=111649405&li=shops 1 Link to post Share on other sites More sharing options...
AdamsRadial Posted May 18, 2020 Share Posted May 18, 2020 (edited) I would have thought a can motor would go into the smokebox and boiler with a drop-down gearbox to a worm on the axle. The tricky part is going to be making it so the body can be removed leaving the motor attached to the gearbox. Is it possible to cut the boiler at the ring between the dome and safety valve so the cab, firebox and centre splashers remain attached to the footplate but the boiler and smokebox slide off? A second option is to leave the large wheels spinning but adapt an old-fashioned tender drive kit to propel the leading and trailing wheels. If you only want to draw one or two coaches you wouldn't need traction tyres on the small wheels. Edited May 18, 2020 by AdamsRadial Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted May 18, 2020 RMweb Gold Share Posted May 18, 2020 Having motorised a few tenders as a lot of GN loco's have very small boilers I appreciate the problem. The easiest and cheapest is to get a cheapo N20 motor and gearbox from Ebay with some cheap plastic bevel gears. Pop a wheelset out of the coach and fix one of the bevels onto it, (it will be offset to one side) then fit a bevel gear onto the cheap motor and using various bits of plasticard as packers line up the motor so it fits nicely with the axle gear, I'd use something like 5 minute epoxy to fix the motor in place. Don't forget you'll need to fit some pickups to the coach, these can just wipe on the top of the wheel. This is one in a 3D printed GN railcar. You only need a motor and gearbox that spins between 30-100rpm at the final drive as it's 1:1 from motor to axle. If you want to try and fit a motor inside the loco it might be possible, I've done one which was awkward but had the advantage of being etched so I could break it into parts. If you can't find the bevel gears or motors I do have some spares as I get 2-3 at a time in case I mess up. 2 1 Link to post Share on other sites More sharing options...
hayfield Posted May 18, 2020 Share Posted May 18, 2020 There are some small but powerful motors available these days, as you say the issue being to slide the motor into the boiler as you fit the chassis to the body, also with single wheelers adhesion may be an issue, plenty of weight at both ends would be required I have powered an Airfix plastic Railcar and a whitemetal MTK railcar by using etched W irons, then use a motor mount attached to a can motor, these days there are quite a few long thin motors Link to post Share on other sites More sharing options...
crompton 33 Posted May 18, 2020 Share Posted May 18, 2020 (edited) You can put a spud motor in the coach bogie. But these are Not cheap Link http://motorbogies.com/index.php?main_page=index&manufacturers_id=6 Edited May 18, 2020 by crompton 33 Link to post Share on other sites More sharing options...
hayfield Posted May 18, 2020 Share Posted May 18, 2020 4 minutes ago, crompton 33 said: You can put a spud motor in the coach bogie. But these are Not cheap Link http://motorbogies.com/index.php?main_page=index&manufacturers_id=6 It says 4 wheeler coach, usually having a much longer wheelbase, Perhaps a High Level Pacemaker http://www.highlevelkits.co.uk/pacemakerpage.html 1 Link to post Share on other sites More sharing options...
RosiesBoss Posted May 18, 2020 Share Posted May 18, 2020 G'day, all, Another, relatively inexpensive solution would be to install a 4-wheeled tram mechanism into the coach, as done here: https://www.rmweb.co.uk/community/index.php?/topic/103776-motorise-gbl-stephensons-rocket/ It worked for me! Regards, Rob 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted May 19, 2020 RMweb Gold Share Posted May 19, 2020 Ah. Is it possible that an adapted Beattie Well Tank 2-4-0T chassis could do the job? Have to say I was unaware of the High Level Pacemaker, and I’m intrigued! Link to post Share on other sites More sharing options...
crompton 33 Posted May 19, 2020 Share Posted May 19, 2020 15 hours ago, hayfield said: It says 4 wheeler coach, usually having a much longer wheelbase, Perhaps a High Level Pacemaker http://www.highlevelkits.co.uk/pacemakerpage.html Yes but he also said he was go'ing to use a class 91 bogie. Link to post Share on other sites More sharing options...
hayfield Posted May 19, 2020 Share Posted May 19, 2020 Yes but unless you remove all but 1 set of wheels, the wheelbase will be way out, I guess a 4 wheel tram style would work but would look very odd 1 Link to post Share on other sites More sharing options...
RMweb Premium JimFin Posted May 19, 2020 RMweb Premium Share Posted May 19, 2020 18 hours ago, SleepyWolf said: I'm trying to motorize a Hornby 4 wheel coach to propel an engine that is unable to be motorized itself. is there an easy way to do this? I have looked at mounting the body on a class 91 bogey. any help is appreciated. This might do the job https://www.ebay.co.uk/itm/Hornby-A3-TENDER-MOTOR-DRIVE-UNIT-CHASSIS-UNUSED-4472-60103-A3-OTHERS-VGC/353069786872?hash=item52349966f8:g:b~sAAOSwH3NXnxQo Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted May 19, 2020 RMweb Gold Share Posted May 19, 2020 1 hour ago, JimFin said: This might do the job https://www.ebay.co.uk/itm/Hornby-A3-TENDER-MOTOR-DRIVE-UNIT-CHASSIS-UNUSED-4472-60103-A3-OTHERS-VGC/353069786872?hash=item52349966f8:g:b~sAAOSwH3NXnxQo £43 !!!! Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted May 19, 2020 RMweb Gold Share Posted May 19, 2020 I think it'll be too high, but it might be possible with a higher arched roof on the coach. You may be able to simply glue the interior of the coach end at the 'far' end in the photo, but there may be issues with vibration. What sort of wheels and motion are you going to use for the loco? Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now