Mark Posted June 13, 2020 Share Posted June 13, 2020 4 hours ago, MPR said: How much of that is original, Mark? There seems to be an awful lot of nickel silver above the running plate. I redesigned the boiler in Nickel Silver last year to get finer boiler bands and the washout plugs on the right hand side of the Firebox were in the wrong position. I also made new steam pipes and a new smokebox door. 2 11 Link to post Share on other sites More sharing options...
RMweb Premium Neal Ball Posted June 14, 2020 RMweb Premium Share Posted June 14, 2020 19 hours ago, Mark said: I redesigned the boiler in Nickel Silver last year to get finer boiler bands and the washout plugs on the right hand side of the Firebox were in the wrong position. I also made new steam pipes and a new smokebox door. Wow! simply stunning 1 2 Link to post Share on other sites More sharing options...
MattA Posted February 5, 2021 Share Posted February 5, 2021 Dapol have announced that an update on the Manor will be issued on Monday 8th Feb: https://www.Dapol.co.uk/78xx-Product-Update 1 Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted February 5, 2021 RMweb Gold Share Posted February 5, 2021 An announcement about an announcement. Trying to think of something to say? 1 1 Link to post Share on other sites More sharing options...
DoctorLard7 Posted February 5, 2021 Share Posted February 5, 2021 If it hasn't progressed past a certain point, rejig the project up to O perhaps? 1 Link to post Share on other sites More sharing options...
SteamingWales Posted February 5, 2021 Share Posted February 5, 2021 1 hour ago, MattA said: Dapol have announced that an update on the Manor will be issued on Monday 8th Feb: https://www.Dapol.co.uk/78xx-Product-Update Let the rumours and speculation commence! 1 Link to post Share on other sites More sharing options...
RMweb Premium Pteremy Posted February 5, 2021 RMweb Premium Share Posted February 5, 2021 I imagine that they have spotted the opportunity to get ahead of the opposition by doing it in EM and P4 rather than 00. 5 Link to post Share on other sites More sharing options...
MattA Posted February 5, 2021 Share Posted February 5, 2021 3 minutes ago, Pteremy said: I imagine that they have spotted the opportunity to get ahead of the opposition by doing it in EM and P4 rather than 00. Pioneering it would be, but hardly the most profitable. 1 Link to post Share on other sites More sharing options...
sidmouth Posted February 5, 2021 Share Posted February 5, 2021 one could hope for an O gauge variant ! in all seriousness I did think that certain of the preserved examples stood to benefit from the Dapol version Link to post Share on other sites More sharing options...
RMweb Premium Pteremy Posted February 5, 2021 RMweb Premium Share Posted February 5, 2021 Don't forget that if Dapol follow the Mogul precedent then the whole locomotive will be available as spare parts, covering all the variants. That may or may not be a good thing, but it will differentiate them from anyone else. 1 Link to post Share on other sites More sharing options...
JSpencer Posted February 7, 2021 Share Posted February 7, 2021 On 05/02/2021 at 15:08, SteamingWales said: Let the rumours and speculation commence! There are 2 possibilités: 1/ "We're cancelling" 2/ "We're still going ahead and promise the modeler the bestist Manor ever which will including a working crew and head lamps" 2 5 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted February 7, 2021 RMweb Premium Share Posted February 7, 2021 I think they will can it. Unless they have livery samples to show us, I’d hazard a guess that they are well behind Accurascale in the process. 2 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted February 7, 2021 RMweb Gold Share Posted February 7, 2021 Well, they carried on with the large prairie despite being gazumped by Hornby, whose model pre-empted theirs to the shops, so I reckon they'll plug on with the Manor despite Accurascale's model being more advanced, if in fact this is the case. Dap have the chassis and themech from the mogul, which they are apparently using with improved gearing in their large prairie, and the tender from the mogul, so only need a body tooling and front bogie to produce a Manor. I think it's possible Dapol are being clever with the timing of the large prairie; sales will be good if they manage to bring it to market just as Hornby are running out of stock. 1 Link to post Share on other sites More sharing options...
RMweb Gold Kaput Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 Isn't the Manor already behind the Wainwright D Class in the Dapol pipeline? And the D still doesn't even have a price - just a "hope" it'll be under £200. I'd be very surprised if they don't cancel the Manor. 2 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 3 hours ago, The Johnster said: I think it's possible Dapol are being clever with the timing of the large prairie; sales will be good if they manage to bring it to market just as Hornby are running out of stock. Thats not Hornby's style though. I’d expect them to swamp the market with praries, in every possible livery, and same livery/number as the competitor, for at least the next few years. They've done that with the 71, Radial, J94, 66, Terrier, Generic coaches. I wouldnt be even surprised if a Hornby Manor was announced in June ready to go, a few errors here and there, but cheaper and in a wide bunch of liveries... theyve got most of it already..just put a Manor body on the Grange. The hobby is generally too small for duplicate toolings, and the choices left for Manufacturers are too small to avoid duplication. I think were reaching a very crowded point where some manufacturers are looking at law of diminishing returns and may focus elsewhere than rtr OO. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 The Grange shares wheels, cylinders, and motion with the Manor, but the frame is shorter at the back, so you can't quite just put a new tooled Manor body on a Hornby Granges chassis. I do not know if the frame length is the only issue; the inside of a Manor tooling has a good bit less space than the no.1 boilered Grange, and fitting the mech in might be an issue as well. Dapol's approach, start off with a Mogul and work upwards, producing a large prairie along the way, is probably easier. Mind you, this does not preclude Hornby using their large prairie chassis and mech for a Manor, or a 43xx for that matter... Link to post Share on other sites More sharing options...
MattA Posted February 8, 2021 Share Posted February 8, 2021 The idea of Hornby adapting their large prairie chassis to other things is all well and good, but the motor could definitely use an improvement on the gutless one that they put in the new prairie. Link to post Share on other sites More sharing options...
sidmouth Posted February 8, 2021 Share Posted February 8, 2021 with the increasing price of 00 gauge , even allowing for increased detail and functionalilty doesn't seem to be always coming with either quality or longevity . when you are making an investment you do hope that the engine will be fit for purpose . Now I suspect that modern Hornby/Bachmann/Dapol/accurascale etc will not last as long as the Hornby O gauge, Hornby 00, Triang 00 . What realistically was the lifespan of the Airfix, Mainline, even early Bachmann , 20 years maybe less Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 (edited) 1 hour ago, sidmouth said: with the increasing price of 00 gauge , even allowing for increased detail and functionalilty doesn't seem to be always coming with either quality or longevity . when you are making an investment you do hope that the engine will be fit for purpose . Now I suspect that modern Hornby/Bachmann/Dapol/accurascale etc will not last as long as the Hornby O gauge, Hornby 00, Triang 00 . What realistically was the lifespan of the Airfix, Mainline, even early Bachmann , 20 years maybe less It's not uncommon to find fully functioning examples of all three, so it depends on how they are used and kept. I knew someone who stored half a dozen almost new early Bachmann locos in his loft for three summers and found the wheels had come off when he got them down. I'd think that the current levels and fragility of detail will tell over time on locos that see intensive use so long as my pet peeve of dodgy gears don't let them down first. Even if Hornby were to announce a Manor, I'd rule theirs out on the basis of my repeated experience of those. I have a small stock of Comet and Perseverance chassis kits, picked up relatively cheaply from club stands at shows etc., awaiting the demise of the originals. John Edited February 8, 2021 by Dunsignalling Link to post Share on other sites More sharing options...
Butler Henderson Posted February 8, 2021 Share Posted February 8, 2021 An option for them would be tool up the variants of the Mogul that there existing tooling does not cater for; fundamentally they cannot do either of the preserved Moguls 5332 or 7325 with the current tooling. 1 1 Link to post Share on other sites More sharing options...
Ed-farms Posted February 8, 2021 Share Posted February 8, 2021 15 hours ago, The Johnster said: Well, they carried on with the large prairie despite being gazumped by Hornby, whose model pre-empted theirs to the shops, so I reckon they'll plug on with the Manor despite Accurascale's model being more advanced My basic understanding of the situation in general is (so please feel free to correct me on this if anyone knows better) the biggest outlay in production is the tooling, research and CAD's are relatively cheap in the production process. If you have started to tool up then you keep going owing to the outlay, but if you are just at research or CAD's you can stop with little cost. I cannot see any CAD's for the Dapol Manor so would be surprised if they had gotten too far with it. 1 1 Link to post Share on other sites More sharing options...
David Stannard Posted February 8, 2021 Share Posted February 8, 2021 (edited) 6 minutes ago, Ed-farms said: My basic understanding of the situation in general is (so please feel free to correct me on this if anyone knows better) the biggest outlay in production is the tooling, research and CAD's are relatively cheap in the production process. If you have started to tool up then you keep going owing to the outlay, but if you are just at research or CAD's you can stop with little cost. I cannot see any CAD's for the Dapol Manor so would be surprised if they had gotten too far with it. Nobody saw any CAD's or had any hint of tooling with Accurascales Manor until they dropped the bombshell with their announcement last week, which included the partly complete EP. Edited February 8, 2021 by David Stannard 1 2 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 16 hours ago, The Johnster said: Well, they carried on with the large prairie despite being gazumped by Hornby, whose model pre-empted theirs to the shops, so I reckon they'll plug on with the Manor despite Accurascale's model being more advanced, if in fact this is the case. Dap have the chassis and themech from the mogul, which they are apparently using with improved gearing in their large prairie, and the tender from the mogul, so only need a body tooling and front bogie to produce a Manor. I think it's possible Dapol are being clever with the timing of the large prairie; sales will be good if they manage to bring it to market just as Hornby are running out of stock. Hardly gazumped - the Hornby prairie had been under development for quite a while, over a year- 18 months, before Dapol announced theirs and obviously the Accuracsacle 'Manor was underway when Dapol announced theirs (there is even a suspicion that Dapol got wind of somebody else working on a 'Manor which caused them to announce theirs in rather a hurry notwithstanding the fact that it was a sensible course for them to follow). As ever the fact that something is announced offers no indication at all as to whether or not it was the first one under development. And as already noted the only time it becomes a problem for a manufacturer is when they have reached the expensive stage of tooling - expenditure up to that point is really no more than chicken feed in the total costs of producing and marketing a model. 3 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Clearwater Posted February 8, 2021 RMweb Gold Share Posted February 8, 2021 24 minutes ago, David Stannard said: Nobody saw any CAD's or had any hint of tooling with Accurascales Manor until they dropped the bombshell with their announcement last week, which included the partly complete EP. Or indeed Bachmann's partial retool of the Modified Hall which is stated as due in the spring. 2 Link to post Share on other sites More sharing options...
9402 Fredrick Posted February 8, 2021 Share Posted February 8, 2021 (edited) Dapol are still doing their model of the Manor, and, like Accurascale, have their EP Sample up as as well as their livery options. Edited February 8, 2021 by 9402 Fredrick Forgot a bit of info. 3 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now