Porcy Mane Posted October 14, 2023 Share Posted October 14, 2023 (edited) 5 hours ago, Captain Kernow said: Are the buffer beams on this model metal, then? I pushed the Hornby hook out from the rear. Detail wise, depending on how far you want to go the Pivot plate will need building back up to be more prototypical. This is an Ambis hook (1mm square tail) which is a good fit. I might use up one of my rapidly diminishing supply of Exactoscale screw links on here... because she's worth it. To me, the wheels are a bit of an enigma. As alluded to earlier the typical bevel of the Stanier wheel is present but it isn't very distinct. I'm puzzled why Hornby have decided to give the wheel centre a prominent raised boss more reminiscent of an inside cylinder driver wheel rather than the flush face of the prototype. More bafflement with the bogie wheel. Should have a raised centre but it's almost flush? They manged to get those bits correct on the latest 9F. See below. 9F to the left, 2MT too the right. P Edited October 14, 2023 by Porcy Mane 6 6 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted October 14, 2023 RMweb Gold Share Posted October 14, 2023 (edited) Deleted - erroneous post. Edited October 14, 2023 by Captain Kernow 1 Link to post Share on other sites More sharing options...
smr248 Posted October 15, 2023 Share Posted October 15, 2023 So, the wheels aren't quite perfect? I struggled to see the difference but they could be slightly better, I agree. Most people aren't going to notice and, of course, it's an 00 model so the gauge is out by ~10% anyway. The thing that I don't like is the longitudinal line where the chassis part of the boiler joins the main part. I'm tempted to buy one but, at the moment, it just feels too expensive. 3 1 Link to post Share on other sites More sharing options...
That Model Railway Guy Posted October 15, 2023 Share Posted October 15, 2023 Finally had a chance to take a look at my own model so thought I'd share a few close up images for anyone interested. This is R3838 the early crest version. Have to say I'm very impressed with it overall 👍 For those who want to see how it actually performs there's a video below. Initial test on the rolling road (DC) at 08:25 Running on the layout (DCC) at 10:36 Don't worry, there's no unboxing in this video - though for the faint of heart I should warn you that there is a brief mention of the packaging at one point 🙃 13 2 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 15, 2023 RMweb Premium Share Posted October 15, 2023 1 hour ago, That Model Railway Guy said: Finally had a chance to take a look at my own model so thought I'd share a few close up images for anyone interested. This is R3838 the early crest version. Have to say I'm very impressed with it overall 👍 For those who want to see how it actually performs there's a video below. Initial test on the rolling road (DC) at 08:25 Running on the layout (DCC) at 10:36 Don't worry, there's no unboxing in this video - though for the faint of heart I should warn you that there is a brief mention of the packaging at one point 🙃 One minor criticism - I feel that the 'polished copper / brasswork' is overdone. CJI. 1 3 Link to post Share on other sites More sharing options...
RMweb Premium phil-b259 Posted October 15, 2023 RMweb Premium Share Posted October 15, 2023 23 minutes ago, cctransuk said: One minor criticism - I feel that the 'polished copper / brasswork' is overdone. CJI. I would say its far easier to tone it down with some weathering than it would be to bling it said pipework once it had arrived. Consequently Hornby's approach strikes me as the sensible approach - provide the loco 'ex works' / 'just been built' condition and leave it up to the end user to tone it down as much or as little as they like. 1 11 Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted October 15, 2023 RMweb Premium Share Posted October 15, 2023 On 13/10/2023 at 14:49, coronach said: I operate Whinburgh and Slitrigg using 3 link couplings and I am disappointed that, notwithstanding the superb detail exhibited by many model locomotives, in many cases the construction makes it difficult to install realistic screw couplings that are effective in coupling to a train. The dummy moulded hook that is provided can’t be adapted to accept links. Sometimes it is possible to drill out a slot that will accept a brass hook but in this case I think that would be difficult. Suggestions and comments gratefully accepted. Have you thought of using the Accurascale screw coupling? It may not be the exact correct design (being better suited to modern freight stock), but it is functional and can be used for coupling up. Drill out as per Porcy's post, and insert the tail of the coupling hook. 1 Link to post Share on other sites More sharing options...
RMweb Gold Kaput Posted October 15, 2023 RMweb Gold Share Posted October 15, 2023 Random question for those that have removed the loco body, was there actually a screw at the front? Instructions mention removing screw holding drawbar and a screw hiding under the pony truck mount but mine appears not to have a screw there, just an empty hole. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 15, 2023 RMweb Premium Share Posted October 15, 2023 59 minutes ago, phil-b259 said: I would say its far easier to tone it down with some weathering than it would be to bling it said pipework once it had arrived. Consequently Hornby's approach strikes me as the sensible approach - provide the loco 'ex works' / 'just been built' condition and leave it up to the end user to tone it down as much or as little as they like. That's my point - having seen plenty of BR-era ex-works steam locos, they weren't out-shopped with all that 'bling'. Very occasionally, it might have been done for an exhibition, but not for general service. CJI. 2 1 Link to post Share on other sites More sharing options...
stewartingram Posted October 15, 2023 Share Posted October 15, 2023 Going ever-so-slightly ot here I'm afraid. I think it was on here we had a link to the Wellingborough loco that did a brake van railtour, 78038 was it? Not a Q about the loco, but the train; would the vans be piped (like passenger stock, or would they be loose-coupled on this tour? Link to post Share on other sites More sharing options...
RMweb Gold MikeParkin65 Posted October 15, 2023 RMweb Gold Share Posted October 15, 2023 Green versions at GETS. 15 1 1 Link to post Share on other sites More sharing options...
Bulleidboy100 Posted October 15, 2023 Share Posted October 15, 2023 (edited) I too saw it at GETS - today, it looked superb - no news though as to when the Collector Club model will arrive. Edited October 15, 2023 by Bulleidboy100 2 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted October 16, 2023 RMweb Gold Share Posted October 16, 2023 (edited) 15 hours ago, Kaput said: Random question for those that have removed the loco body, was there actually a screw at the front? Instructions mention removing screw holding drawbar and a screw hiding under the pony truck mount but mine appears not to have a screw there, just an empty hole. Yes, in the traditional hard to get to “under the pony wheel” spot. Edited October 16, 2023 by adb968008 Link to post Share on other sites More sharing options...
RMweb Premium Izzy Posted October 16, 2023 RMweb Premium Share Posted October 16, 2023 With regard to the motor it looks as if it might be the same one as used in the J15, which does give excellent performance and appears to do the same here. Bob 1 1 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted October 16, 2023 RMweb Gold Share Posted October 16, 2023 16 hours ago, cctransuk said: That's my point - having seen plenty of BR-era ex-works steam locos, they weren't out-shopped with all that 'bling'. Very occasionally, it might have been done for an exhibition, but not for general service. CJI. It all depends I think as far as the model is concerned it's easier to 'dirty' the pipewrk than it is to 'clean' it. And don't forget that copying the condition of a preserved engine is very different from their real raliway everyday condition. This photo very obviously isn't a 2 MT but it's biggest brother and as can be seen it is in 'very ex-works' condition and all probaly running-in before being returned to its home shed. So out of works for no more than a week and pinched by Swindon shed for a little Sunday job before being sent home to its owning Region. But almost all the pipework is already dull and would have been going thaht way from almost the instant it was fitted in works as the metal tarnished. A few days in running got it to this state. 4 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 16, 2023 RMweb Premium Share Posted October 16, 2023 5 minutes ago, The Stationmaster said: It all depends I think as far as the model is concerned it's easier to 'dirty' the pipewrk than it is to 'clean' it. And don't forget that copying the condition of a preserved engine is very different from their real raliway everyday condition. This photo very obviously isn't a 2 MT but it's biggest brother and as can be seen it is in 'very ex-works' condition and all probaly running-in before being returned to its home shed. So out of works for no more than a week and pinched by Swindon shed for a little Sunday job before being sent home to its owning Region. But almost all the pipework is already dull and would have been going thaht way from almost the instant it was fitted in works as the metal tarnished. A few days in running got it to this state. Quite - polished lubricator pipework, etc. is unlikely, even nowadays in preservation. To my eyes, it just makes the model look toy-like - akin to one of those American abominations that are destined, annually, to endlessly circle a Christmas tree! Most of us try to reproduce a working railway, and such 'bling' has no place in that scenario. CJI 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Kaput Posted October 16, 2023 RMweb Gold Share Posted October 16, 2023 1 hour ago, adb968008 said: Yes, in the traditional hard to get to “under the pony wheel” spot. Screw eventually turned up. Think it was loose. Alas the loco sounds like a bag of spanners while running so it'll need to go for replacement. 2 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted October 16, 2023 RMweb Gold Share Posted October 16, 2023 (edited) Dirty or clean, this weekend at the Bluebell railway.. total OT but in the bay at Sheffield Park was 34059 Sir Archibald Sinclair, although not in steam, its firebox was warm… its been out to play first time in a decade last weeks. Edited October 16, 2023 by adb968008 3 Link to post Share on other sites More sharing options...
Michael Hodgson Posted October 16, 2023 Share Posted October 16, 2023 1 hour ago, Kaput said: Screw eventually turned up. Think it was loose. Alas the loco sounds like a bag of spanners while running so it'll need to go for replacement. Hornby engine with a screw loose? Whoever would have guessed! 2 Link to post Share on other sites More sharing options...
RMweb Gold ikks Posted October 16, 2023 RMweb Gold Share Posted October 16, 2023 19 hours ago, cctransuk said: That's my point - having seen plenty of BR-era ex-works steam locos, they weren't out-shopped with all that 'bling'. Very occasionally, it might have been done for an exhibition, but not for general service. CJI. Living in Derby in my yoof!, I agree. I saw many ex-works locos and I don't recall seeing many(if any) with all that highly polished copper and brass. Mike Link to post Share on other sites More sharing options...
MidlandRed Posted October 16, 2023 Share Posted October 16, 2023 4 hours ago, cctransuk said: Quite - polished lubricator pipework, etc. is unlikely, even nowadays in preservation. To my eyes, it just makes the model look toy-like - akin to one of those American abominations that are destined, annually, to endlessly circle a Christmas tree! Most of us try to reproduce a working railway, and such 'bling' has no place in that scenario. CJI Preservation, admittedly - and not quite as blingy as Hornby’s superb 2MT, but I was taken with 41312 at Loughborough a couple of years back, partially because of the clean pipework. 5 Link to post Share on other sites More sharing options...
VIA185 Posted October 16, 2023 Share Posted October 16, 2023 (edited) 5 hours ago, cctransuk said: Quite - polished lubricator pipework, etc. is unlikely, even nowadays in preservation. To my eyes, it just makes the model look toy-like - akin to one of those American abominations that are destined, annually, to endlessly circle a Christmas tree! Most of us try to reproduce a working railway, and such 'bling' has no place in that scenario. CJI Models have to sell themselves to the general public and that means being presented in 'showroom condition'. I have one of those 'American abominations' - It had a red boiler, a bright green tender and its DCC chip played Christmas carols! It's by Broadway Limited - a manufacturer of 'serious' well-detailed models. Some masking tape, a matt black aerosol, and some new decals and I have a White Pass & Yukon 'mogul' which, with repainted Bachmann coaches, makes a very nice White Pass souvenir - even if it does come out once a year to circle round a Christmas tree! It's much easier for a good modeller to put something into 'workaday' condition than it is for a mediocre modeller to make a work-stained model look pristine. (CJL) Edited October 16, 2023 by VIA185 3 4 2 Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted October 16, 2023 RMweb Premium Share Posted October 16, 2023 The issue is not that the pipework is too clean; it's that it's about 3 times overscale. 1 4 Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted October 16, 2023 Author RMweb Gold Share Posted October 16, 2023 7 hours ago, cctransuk said: Quite - polished lubricator pipework, etc. is unlikely, even nowadays in preservation. To my eyes, it just makes the model look toy-like - akin to one of those American abominations that are destined, annually, to endlessly circle a Christmas tree! Most of us try to reproduce a working railway, and such 'bling' has no place in that scenario. CJI Well im sure, as you have often pointed out to others in various threads that have 'questioned' areas of RTR models, that you can do some modelling and dull down any 'bling' to your own satisfaction... 4 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 16, 2023 RMweb Premium Share Posted October 16, 2023 17 minutes ago, Graham_Muz said: Well im sure, as you have often pointed out to others in various threads that have 'questioned' areas of RTR models, that you can do some modelling and dull down any 'bling' to your own satisfaction... Not disputed - but why is it necessary? Are the principal players producing models of actual trains - or a fictitious image of what railways never were? Sooner or later, such 'bling' will become received wisdom of the reality 'back in the day' - and future generations will be unable to understand why such a perfect system was superceded. It isn't accurate, and it isn't justifiable! CJI. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now