MGR Hooper! Posted December 31, 2019 Share Posted December 31, 2019 Any know if there's a 1:87 scale Morris Oxford Series III (or anything remotely similar) available? Here's the car in question:- https://en.m.wikipedia.org/wiki/Morris_Oxford_Series_III I know Oxford Diecast do a 1:76 scale one, but I'm after a 1:87 scale version if available. Something similar would also suffice Cheers. Link to post Share on other sites More sharing options...
cypherman Posted December 31, 2019 Share Posted December 31, 2019 (edited) Hi, The only Morris Oxford series III I can find in the scale you want is a vintage Dinky one. They range in price from about £20.00 up to several hundred pounds if mint and boxed. There are several for sale on Ebay. Edited December 31, 2019 by cypherman 1 Link to post Share on other sites More sharing options...
Les Bird Posted December 31, 2019 Share Posted December 31, 2019 (edited) I think you'll struggle to find many British cars in 1/87. Eko of Spain used to make some and I have a Rover 3 litre, Mini, Anglia 105E, Mark 9 Jaguar, E Type Jaguar and an MGA. I doubt if they ever did an Oxford, Gaugemaster have a small range of 1/87 cars but few of them are British. Incidentally, there is a specific heading for road vehicles in the skills and knowledge section of the forum. Edited December 31, 2019 by Les Bird 1 Link to post Share on other sites More sharing options...
RANGERS Posted December 31, 2019 Share Posted December 31, 2019 Try Australian forum sites, there used to be a range of UK prototype truck kits available in 1:87 scale from Peter Young models aimed at the Aussie market. I don’t think they’re still around but there may be other manufacturers doing cars. This might be a starting point - http://www.87thscale.info/manufacturers_list_part-1.htm 1 Link to post Share on other sites More sharing options...
RMweb Premium Moxy Posted January 1, 2020 RMweb Premium Share Posted January 1, 2020 7 hours ago, Les Bird said: I think you'll struggle to find many British cars in 1/87. Eko of Spain used to make some and I have a Rover 3 litre, Mini, Anglia 105E, Mark 9 Jaguar, E Type Jaguar and an MGA. I doubt if they ever did an Oxford Eko still do, under the Toyeko brand, link here to their website. They don't seem to have a UK distributor. There is also some discussion about them here https://www.rmweb.co.uk/community/index.php?/topic/141771-eko/ 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted January 1, 2020 Share Posted January 1, 2020 Also look for Austin Cambridge as they were the re-badged version. Commonly known as rust buckets.... We had one of these when I was a kid. A VI Saloon trying to be American with the fins, but in white. They look good in retrospect, but looked awfully dated during the 1970s when everyone wanted modern cars such as Escorts, Capris and Cortinas. Jason 1 1 1 Link to post Share on other sites More sharing options...
DCB Posted January 1, 2020 Share Posted January 1, 2020 The Oxford 111 was one of the most numerous cars around as it became the Hindustan produced in Indiia for the best part of 50 years. I would search "Hindustan Ambassador," rather than Oxford series 111. The Oxford was a pretty awful device but the later one was if anything worse, They were nothing like a rot prone as the Issigonis devices, Mini, 1100, Maxi etc and the B series engines were unburstabe, though they did go through exhaust valves at an alarming rate. My mate drove his series V round a corner a bit fast, demolished a blokes wall, kept his foot down swerved across a lawn and demolished his hedge on the way back to the road without slowing down appreciably or leaving a trail of fibreglass or number plates as later vehicles would. Achilles's Eel was the front suspension, take the front coil springs out and they could take your head off. Larger ones had removable pans to let the springs out before separating the kingpin from the "Wishbone" I really hated working on that type of susupension. 1 2 Link to post Share on other sites More sharing options...
SRman Posted January 1, 2020 Share Posted January 1, 2020 Eko has already been mentioned, but Brekina also seem to have some British cars in HO in their range. I couldn't see Morris Oxfords or Austin Cambridges anywhere, but there were Morris Minors and Minis, and Austin Se7en/Minis. It may be worth searching for Wolseleys and Rileys, although the earlier ones bore no resemblance to the Austin/Morris ranges, but the Farina style was common to all. 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted January 1, 2020 Author Share Posted January 1, 2020 Thanks to everyone who has responded with both useful advice and links to similar vehicles. I'll let you'll know of the developments made. Some are quite similar that basic modifications can be made. Last resort is to use a 1:76 scale one from Oxford and plonk it in the middle of 1:87 scale dioramas. Link to post Share on other sites More sharing options...
MGR Hooper! Posted January 1, 2020 Author Share Posted January 1, 2020 1 hour ago, DavidCBroad said: The Oxford 111 was one of the most numerous cars around as it became the Hindustan produced in Indiia for the best part of 50 years. I would search "Hindustan Ambassador," rather than Oxford series 111. The Oxford was a pretty awful device but the later one was if anything worse, They were nothing like a rot prone as the Issigonis devices, Mini, 1100, Maxi etc and the B series engines were unburstabe, though they did go through exhaust valves at an alarming rate. My mate drove his series V round a corner a bit fast, demolished a blokes wall, kept his foot down swerved across a lawn and demolished his hedge on the way back to the road without slowing down appreciably or leaving a trail of fibreglass or number plates as later vehicles would. Achilles's Eel was the front suspension, take the front coil springs out and they could take your head off. Larger ones had removable pans to let the springs out before separating the kingpin from the "Wishbone" I really hated working on that type of susupension. Hey mate! That's exactly what's being done. It's to use as a base for a HM Ambassador for a Calcutta themed diorama. HM Ambassador models were made but all of them were in 1:43 scale. Model car collections as a hobby is big in India, but model trains aren't. So finding an HM Ambassador in that scale is impossible. Been looking for years. So the plan was to modify an Oxford Morris Series II or Series III. 1 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 1, 2020 RMweb Gold Share Posted January 1, 2020 Perhaps a long shot? But what about making a mould from the 1:76 model and casting one of your own in a material with a high shrinkage rate. You won't get there in one step. You would then need to make another mould from your new prototype and cast again. 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted January 1, 2020 Author Share Posted January 1, 2020 I could just try designing one...but all we need is 3-5 cars. Seems too much of work for such a small amount. But let's see. The suggestion is good. I never knew such a thing existed. Link to post Share on other sites More sharing options...
cypherman Posted January 1, 2020 Share Posted January 1, 2020 (edited) Hi, What about getting the Dinky model and getting it scanned. Then increasing the size of the scan to the size wanted. than getting some one with a 3d printer to print it out. Edited January 1, 2020 by cypherman 1 Link to post Share on other sites More sharing options...
Nick Holliday Posted January 1, 2020 Share Posted January 1, 2020 Looking at the Brekina range, I noticed they do a variety of German designs from the 1950s with shapes reminiscent of the Morris Oxford that might be worth investigating. 1 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 1, 2020 RMweb Gold Share Posted January 1, 2020 (edited) 59 minutes ago, Nick Holliday said: Looking at the Brekina range, I noticed they do a variety of German designs from the 1950s with shapes reminiscent of the Morris Oxford that might be worth investigating. A Peugeot 404 (also a Farina design) would probably be the best option. But I don't know of a suitable 1:87 model. Edited January 1, 2020 by Joseph_Pestell Add 1 Link to post Share on other sites More sharing options...
Nick Holliday Posted January 1, 2020 Share Posted January 1, 2020 20 minutes ago, Joseph_Pestell said: A Peugeot 404 (also a Farina design) would probably be the best option. But I don't know of a suitable 1:87 model. The OP is after the earlier Morris Oxford - Series III ?, whereas the Farina design was much later (Series V?) - a bit of a red herring, perhaps. I was thinking of something like an Opel, like this one in Walthers list of Brekina models https://www.walthers.com/1953-1954-opel-olympia-sedan-assembled-steel-blue Link to post Share on other sites More sharing options...
Fat Controller Posted January 1, 2020 Share Posted January 1, 2020 32 minutes ago, Joseph_Pestell said: Rather than the Peugeot 404, the 403, which has a more rounded shape, may be of more use:- https://www.google.com/search?sxsrf=ACYBGNRPm3bWkk2ZAQkP00hUT8O8hY6wQg:1577914147051&q=Peugeot+403+(H0+Scale+model&spell=1&sa=X&ved=2ahUKEwi4huKhrOPmAhUxVBUIHX1uCQcQBSgAegQIDBAn&biw=1840&bih=864 Link to post Share on other sites More sharing options...
MGR Hooper! Posted January 2, 2020 Author Share Posted January 2, 2020 4 hours ago, Nick Holliday said: The OP is after the earlier Morris Oxford - Series III ?, whereas the Farina design was much later (Series V?) - a bit of a red herring, perhaps. I was thinking of something like an Opel, like this one in Walthers list of Brekina models https://www.walthers.com/1953-1954-opel-olympia-sedan-assembled-steel-blue This one is perfect!!! Just needs a slight modification. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now