doilum Posted November 29, 2021 Share Posted November 29, 2021 Found the unicorn!! There was a thread in 2012 titled "Hudson Tipper in EM, take2" which is essentially a review of the RT model. It includes links to several photographs from the Bartlett collection. The last one is from a Hudson catalogue showing the brake variation mi previously described. There is also one with mixed axles but I have seen others. Just can't remember where! Link to post Share on other sites More sharing options...
Adam Posted November 29, 2021 Share Posted November 29, 2021 2 hours ago, doilum said: Found the unicorn!! There was a thread in 2012 titled "Hudson Tipper in EM, take2" which is essentially a review of the RT model. It includes links to several photographs from the Bartlett collection. The last one is from a Hudson catalogue showing the brake variation mi previously described. There is also one with mixed axles but I have seen others. Just can't remember where! This one you mean? They're nice kits (I have two more to do in the drawer - between those they'll be sufficient spares to make up one of the variations - unbraked and/or welded). These were built by Hudsons from scratch (though I suppose some wheelsets might have been recycled). Adam Link to post Share on other sites More sharing options...
doilum Posted November 29, 2021 Share Posted November 29, 2021 9 minutes ago, Adam said: This one you mean? They're nice kits (I have two more to do in the drawer - between those they'll be sufficient spares to make up one of the variations - unbraked and/or welded). These were built by Hudsons from scratch (though I suppose some wheelsets might have been recycled). Adam Thats the one. I think the buffer units might have been pre used too. They led a hard life, were pretty unloved by all accounts and easily repaired with a gas axe and what ever was available in the wagon shop. Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted November 29, 2021 RMweb Gold Share Posted November 29, 2021 I built one with the screw brake system. The 1957 Robert Hudson catalogue includes a diagram of all the parts and that's what I worked from. This one is in 7mm scale. 6 1 Link to post Share on other sites More sharing options...
Simon Moore Posted November 29, 2021 Author Share Posted November 29, 2021 18 minutes ago, Ruston said: I built one with the screw brake system. The 1957 Robert Hudson catalogue includes a diagram of all the parts and that's what I worked from. This one is in 7mm scale. Thats a nice model Dave. I think I might order a load of wheelsets from Wizard & have a batch build session in the new year. Primrose needs a few to shunt. Link to post Share on other sites More sharing options...
doilum Posted November 29, 2021 Share Posted November 29, 2021 37 minutes ago, Ruston said: I built one with the screw brake system. The 1957 Robert Hudson catalogue includes a diagram of all the parts and that's what I worked from. This one is in 7mm scale. Is the screw visible or is it a shaft linked to a central gearbox? I think I am correct in assuming that all the brakes are worked from the single wheel. I realized this afternoon that although I built one this way I never sorted out the control mechanism. It also needs the tyre reattaching to the wheel as it is sat at an odd angle in the display cabinet. Must be a weather related expansion issue. Link to post Share on other sites More sharing options...
Simon Moore Posted January 6, 2022 Author Share Posted January 6, 2022 Last night I finally sat down to work some more on one of my industrials. Primrose has been put aside for now as I'm still having issues with it. I'm going to stripe the wheels off & requarter them. Anyway I made a start putting the rest of the details to a rt models sentinel I built. Its a lovely slow runner it just needs finishing off. Another few sessions & it should be ready for some paint. I'm going to do it as one of the Whiflet foundry ones in blue & red. The only difference is I'm going to name it Fred after my little boy Freddie. 9 1 Link to post Share on other sites More sharing options...
Marshall5 Posted January 6, 2022 Share Posted January 6, 2022 A lovely model. I was hoping that Robert might do it in 7mm scale. Here's one in 12": 1' scale. Ray. 8 Link to post Share on other sites More sharing options...
Simon Moore Posted January 6, 2022 Author Share Posted January 6, 2022 That's the one Ray, its now a case of finding the correct blue. Link to post Share on other sites More sharing options...
Portchullin Tatty Posted January 6, 2022 Share Posted January 6, 2022 8 minutes ago, Simon Moore said: That's the one Ray, its now a case of finding the correct blue. Try humbrol no 14 (which is a gloss). 1 Link to post Share on other sites More sharing options...
Simon Moore Posted January 6, 2022 Author Share Posted January 6, 2022 Cheers Tatty I will give it a whirl Link to post Share on other sites More sharing options...
Simon Moore Posted January 7, 2022 Author Share Posted January 7, 2022 The Sentinel is now in primer & ready for a blast of French blue this afternoon. I've also delved into the kit pile to remind myself of what I actually have & to see what might be a nice next build. I've dug this little critter out, I saw it advertised when Mike had just produced it & managed to get the last one from the first batch. I've got wheels & buffers for it & just ordered the high level motor etc. I'm going to return the jackshaft for a em one as I ordered it for p4 when attempting to model in that scale. I know it will be a lovely build as all Mike's kits are so should be fun. I've a part built metro tank to build for a friend so I will start this whilst waiting on some parts & then when I need a break from the other build I can turn to this one again. 3 Link to post Share on other sites More sharing options...
Simon Moore Posted January 7, 2022 Author Share Posted January 7, 2022 I've put the sentinel into its first coat of paint. I've used humbrol 14 french blue which is a bit bright & probably the wrong shade. I'm hoping once finished & matt varnished it should knock it back along with weathering to finish it off. 10 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted January 7, 2022 RMweb Premium Share Posted January 7, 2022 10 hours ago, Simon Moore said: The Sentinel is now in primer & ready for a blast of French blue this afternoon. I've also delved into the kit pile to remind myself of what I actually have & to see what might be a nice next build. I've dug this little critter out, I saw it advertised when Mike had just produced it & managed to get the last one from the first batch. I've got wheels & buffers for it & just ordered the high level motor etc. I'm going to return the jackshaft for a em one as I ordered it for p4 when attempting to model in that scale. I know it will be a lovely build as all Mike's kits are so should be fun. I've a part built metro tank to build for a friend so I will start this whilst waiting on some parts & then when I need a break from the other build I can turn to this one again. It’s back in stock now. Link to post Share on other sites More sharing options...
Simon Moore Posted January 8, 2022 Author Share Posted January 8, 2022 8 hours ago, Michael Edge said: It’s back in stock now. Looks a lovely kit Mike. I'm looking forward to making that one. Still cannot decide if I'm building it rigid or with some form of compensation. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted January 8, 2022 RMweb Premium Share Posted January 8, 2022 Compensation is easy and always worth the effort in a four wheel loco. 1 1 Link to post Share on other sites More sharing options...
Simon Moore Posted January 8, 2022 Author Share Posted January 8, 2022 26 minutes ago, Michael Edge said: Compensation is easy and always worth the effort in a four wheel loco. This rt sentinel has built in compensation & it shows with its slow running qualities. I might go the whole hog & fit some high level space saver blocks I've got here in stock. I tried your beams but I just couldn't get them to work satisfactory. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted January 8, 2022 RMweb Premium Share Posted January 8, 2022 What exactly was the problem? The beams fit against the inside of the frames (they benefit from some form of strap to hold them against the frame plates), bearing surfaces increased by soldering the bushes to their inside faces. Plenty of grease where you don't want the solder to go helps here. It's a foolproof system I've used for more than 40 years, I used to do it when scratchbuilding, making the coupling rods first and then jig drilling everything else from them but etching does all that for you - it wasn't my idea, I first saw it in a 7mm Ravenscale West Country kit and later in Kemilway's Ivatt 4MT frame kit for the Airfix kit. It also usefully limits the axle movement - most other compensation systems give far too much, .5mm is easily enough for our purposes. 1 1 Link to post Share on other sites More sharing options...
Simon Moore Posted January 8, 2022 Author Share Posted January 8, 2022 40 minutes ago, Michael Edge said: What exactly was the problem? The beams fit against the inside of the frames (they benefit from some form of strap to hold them against the frame plates), bearing surfaces increased by soldering the bushes to their inside faces. Plenty of grease where you don't want the solder to go helps here. It's a foolproof system I've used for more than 40 years, I used to do it when scratchbuilding, making the coupling rods first and then jig drilling everything else from them but etching does all that for you - it wasn't my idea, I first saw it in a 7mm Ravenscale West Country kit and later in Kemilway's Ivatt 4MT frame kit for the Airfix kit. It also usefully limits the axle movement - most other compensation systems give far too much, .5mm is easily enough for our purposes. It was the flopping about I'd never thought of putting some scrap on the side frames. I will give it a whirl on this next build. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted January 8, 2022 RMweb Premium Share Posted January 8, 2022 Others have put tube over the axles to keep the beams apart, I've seen springs suggested but I think this would increase friction too much and inhibit the action. I use scrap etch or sometimes wire to make these, still thinking of a way of incorporating them into the kit design. Brass wire straps fitted to Stanier 3P frames, bearings not added at this stage. 3 2 Link to post Share on other sites More sharing options...
Simon Moore Posted January 8, 2022 Author Share Posted January 8, 2022 Thanks for that Mike I am going to try it out on the lms drewery kit. I'll use the beams & make the frames up. Link to post Share on other sites More sharing options...
Simon Moore Posted January 9, 2022 Author Share Posted January 9, 2022 Yesterday I got a fair amount done on the model, I actually got all the paintwork done & matt varnish on so it's now just a case of window surrounds painting & fitting, a nameplate & weathering. I'm going to leave it for now, I had a rough night last night with backache so it's it's day or rest today. That's all for now, the next job is making the frames for the drewery. 13 Link to post Share on other sites More sharing options...
Portchullin Tatty Posted January 9, 2022 Share Posted January 9, 2022 That looks very smart Simon! 1 Link to post Share on other sites More sharing options...
Simon Moore Posted January 9, 2022 Author Share Posted January 9, 2022 1 hour ago, Portchullin Tatty said: That looks very smart Simon! Cheers Tatty Thanks for the colour advice, it worked out very well in the end. Link to post Share on other sites More sharing options...
Simon Moore Posted January 9, 2022 Author Share Posted January 9, 2022 a short video of the sentinel running 6 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now