MGR Hooper! Posted December 22, 2019 Share Posted December 22, 2019 I've been repainting a Class 90 and during the process, the paint application wasn't upto the standard I liked and I proceeded to strip the paint. When it comes to paint removal/stripping, I've used Dettol as a paint remover, something I've used successfully for over 8 years. Recently however I used the same process and whilst the paint was removed, the primer hasn't come off. Infact now I think the Dettol has reached with the primer and basically made it into a thick layer. This has now covered up all the fine detail. I was advised to use isopropyl alcohol and even saw a few videos on YouTube where it's been successfully used. However it's been soaking in the isopropyl alcohol for over 2 weeks now and absolutely nothing has happened. Any idea what I can do next? Should I give the Dettol another try as it was softening the primer initially? Or should I give some other products a try? Cheers... 1 Link to post Share on other sites More sharing options...
Carnforth Posted December 22, 2019 Share Posted December 22, 2019 (edited) If you can get some, try Mr Muscle foaming oven cleaner. Place item in plastic bag to stop it drying and leave to soak. Edited December 22, 2019 by Carnforth 1 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted December 22, 2019 RMweb Gold Share Posted December 22, 2019 And if that fails precision paints Super Strip should shift it.... Link to post Share on other sites More sharing options...
Paul Cram Posted December 22, 2019 Share Posted December 22, 2019 I use brake fluid successfully. Link to post Share on other sites More sharing options...
MGR Hooper! Posted December 22, 2019 Author Share Posted December 22, 2019 Will look out for the Mr. Muscle and brake fluid first. @Phil Bullock will they ship internationally without me having to sell a kidney? Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 22, 2019 RMweb Premium Share Posted December 22, 2019 IPA is my normal choice - with patience and an old toothbrush. Some Bachmann plastics do not react well to brake fluid. DOT4 is good for Airfix Mk2's but will soften Bachmann Mk1s. If in doubt- Phoenix Superstrip - although the OP may have trouble getting it shipped. 2 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted December 22, 2019 RMweb Gold Share Posted December 22, 2019 A good question! Guess only the supplier can answer that one .... would not want to suggest you go out on a limb! 1 Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted December 22, 2019 RMweb Premium Share Posted December 22, 2019 (edited) On 22/12/2019 at 06:19, MGR Hooper! said: However it's been soaking in the isopropyl alcohol for over 2 weeks now and absolutely nothing has happened. I'm stripping a Heljan 47 in IPA at the moment. About 2/3 of it has wiped off easily but some has not shifted even a fraction after a few days. Edited December 23, 2019 by Hal Nail 1 Link to post Share on other sites More sharing options...
Guest MM1991 Posted December 23, 2019 Share Posted December 23, 2019 On 22/12/2019 at 06:19, MGR Hooper! said: I've been repainting a Class 90 and during the process, the paint application wasn't upto the standard I liked and I proceeded to strip the paint. When it comes to paint removal/stripping, I've used Dettol as a paint remover, something I've used successfully for over 8 years. Recently however I used the same process and whilst the paint was removed, the primer hasn't come off. Infact now I think the Dettol has reached with the primer and basically made it into a thick layer. This has now covered up all the fine detail. I was advised to use isopropyl alcohol and even saw a few videos on YouTube where it's been successfully used. However it's been soaking in the isopropyl alcohol for over 2 weeks now and absolutely nothing has happened. Any idea what I can do next? Should I give the Dettol another try as it was softening the primer initially? Or should I give some other products a try? Cheers... I'd put it back in the dettol for a couple of hours at a time, then scrub it off with a dry toothbrush - dont wet the toothbrush or the shell. I maybe teaching you to suck eggs though I done this quite recently when it took an age to get the shell back to bare plastic and get rid of the gunk. Is it the original brown Dettol you are using? Link to post Share on other sites More sharing options...
5 C Posted December 23, 2019 Share Posted December 23, 2019 Dettol as a paint stripper was discussed at length here a few months ago: There were a number of reports of plastic being attacked and paint congealing into a near-impossible to remove mess. I'm a victim too unfortunately. At the weekend, I successfully used IPA to strip a Bachmann tender. IPA is a major constituent of Phoenix Superstrip. Link to post Share on other sites More sharing options...
MikeTrice Posted December 23, 2019 Share Posted December 23, 2019 I always use IPA and it has never failed me to date. Daft question, but are you using 100% strength or has it been watered down? Link to post Share on other sites More sharing options...
NickL2008 Posted December 23, 2019 Share Posted December 23, 2019 Ive used Dettol, mixed 50/50 with water, leave it in soak, and use enamel thinners to remove the paint, after a good soaking it just melts off I found NL 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted December 24, 2019 Author Share Posted December 24, 2019 6 hours ago, MM1991 said: I'd put it back in the dettol for a couple of hours at a time, then scrub it off with a dry toothbrush - dont wet the toothbrush or the shell. I maybe teaching you to suck eggs though I done this quite recently when it took an age to get the shell back to bare plastic and get rid of the gunk. Is it the original brown Dettol you are using? Yes, the original brown one. That's the only thing that worked. Link to post Share on other sites More sharing options...
MGR Hooper! Posted December 24, 2019 Author Share Posted December 24, 2019 3 hours ago, MikeTrice said: I always use IPA and it has never failed me to date. Daft question, but are you using 100% strength or has it been watered down? The 1L bottle I got says 99% Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 24, 2019 RMweb Premium Share Posted December 24, 2019 9 hours ago, MGR Hooper! said: The 1L bottle I got says 99% Try diluting it with water to 92/93% Link to post Share on other sites More sharing options...
MGR Hooper! Posted December 24, 2019 Author Share Posted December 24, 2019 25 minutes ago, newbryford said: Try diluting it with water to 92/93% Will do... I'm assuming diluting it will help with the paint removal procedure or rather quicken it? Link to post Share on other sites More sharing options...
sunbeam.20 Posted December 25, 2019 Share Posted December 25, 2019 Don't dilute, it shall only reduce its effectiveness. I have found soda blasting to be the best solution, gives the surface some tooth also, and can be done on any material. Matthew Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 25, 2019 RMweb Premium Share Posted December 25, 2019 On 24/12/2019 at 11:31, MGR Hooper! said: Will do... I'm assuming diluting it will help with the paint removal procedure or rather quicken it? Personally, I have found that 99% works, but a slight dilution to about 92% makes it work better. IPA isn't the fastest in tehe first place, but I've never had any reaction to model railway plastics. As with any paint removal/decal removal etc, there are lots of personal preferences. Experiment and use what works for you. 1 Link to post Share on other sites More sharing options...
RobMG Posted December 30, 2019 Share Posted December 30, 2019 I have had varying success with paint stripping plastic models. I stripped the paint a couple of Lima siphons using methylated spirits. All the paint in the most difficult corners washed off dead easily within 15 minutes, so I thought brilliant, I have found the answer. Not to be, a month later I tried to strip a Lima class 33 again using meths, but it wouldn't touch it, not even after prolonged soaking. Then I tried Dettol that sort of worked, but I had to leave it soaking overnight , and then I had to scrub it with a fairly stiff brush. It didn't all come off , but while the paint was still soft I washed it in meths again and most came off. I don't know why it works with some model and not others... Rob. 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted December 30, 2019 Author Share Posted December 30, 2019 Well not sure if this changes anything or not, but just to be clear, the paint has come off. It's the primer that's being stubborn, it's also sort of "melted" and filled in all the small details on the locomotive. It's ike I dipped the locomotive in thick paint and dried it quickly. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted December 30, 2019 RMweb Premium Share Posted December 30, 2019 2 minutes ago, MGR Hooper! said: Well not sure if this changes anything or not, but just to be clear, the paint has come off. It's the primer that's being stubborn, it's also sort of "melted" and filled in all the small details on the locomotive. It's ike I dipped the locomotive in thick paint and dried it quickly. Sounds to me like the plastic of the body has been attacked by the paint stripper - if so, the damage is terminal, I'm afraid. Regards, John Isherwood. 1 Link to post Share on other sites More sharing options...
RMweb Premium M.I.B Posted January 3, 2020 RMweb Premium Share Posted January 3, 2020 I agree with John above. Brake fluid followed by a warm soapy water bath and then a cold water rinse is always my choice. Found it works better than IPA. But don't do this on Bachmann plastics, and remove all steel ( handrails, buffers etc). Brake fluid will rapidly rust up anything steel content. 1 Link to post Share on other sites More sharing options...
Carnforth Posted January 4, 2020 Share Posted January 4, 2020 On 30/12/2019 at 15:08, cctransuk said: Sounds to me like the plastic of the body has been attacked by the paint stripper - if so, the damage is terminal, I'm afraid. Regards, John Isherwood. This is why I use Mr Muscle. Won't affect plastics. In a previous thread on this topic, someone used it to strip a point without any damage to any part. 1 Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted January 4, 2020 RMweb Premium Share Posted January 4, 2020 3 hours ago, Carnforth said: This is why I use Mr Muscle. Won't affect plastics. Me too - though I do use methylated spirits for old Lima items; the paint just rinses off to leave a pristine moulding with meths. Regards, John Isherwood. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now