Caley Jim Posted June 22, 2021 Share Posted June 22, 2021 4 minutes ago, Sithlord75 said: Me too - seems to be something in the air over there. Not a lot of modelling going on, too much sunshine perhaps?? Sunshine makes the weeds grow, especially when it's been raining! Jim Link to post Share on other sites More sharing options...
RMweb Premium nick_bastable Posted June 23, 2021 RMweb Premium Share Posted June 23, 2021 1 hour ago, Sithlord75 said: Me too - seems to be something in the air over there. Not a lot of modelling going on, too much sunshine perhaps?? its more overcast and damp still haven't got much done spent last few days trying to re-quarter a Jinty that threw its coupling rod Nick B 1 Link to post Share on other sites More sharing options...
-missy- Posted June 23, 2021 Share Posted June 23, 2021 22 hours ago, queensquare said: It probably would be Andy and I have promised myself I will learn basic CAD one of these days but at the moment I'm too busy making things. Jerry This literally took me 5 mins.... There you go, ready for etching. Easy! Julia :p 3 2 5 Link to post Share on other sites More sharing options...
drduncan Posted June 23, 2021 Share Posted June 23, 2021 8 hours ago, Sithlord75 said: Me too - seems to be something in the air over there. Not a lot of modelling going on, too much sunshine perhaps?? Not around here lately (until this morning anyway). Still, it meant I got to give a chassis for an L & Y Barton Wright 0-6-2t in P4 (it’s not mine before panic erupts) a damn good glaring at interspersed with some choice nautical expletives rather than gallivanting around the countryside with the children at the weekend. Link to post Share on other sites More sharing options...
Caley Jim Posted June 23, 2021 Share Posted June 23, 2021 3 hours ago, drduncan said: ....... I got to give a chassis for an L & Y Barton Wright 0-6-2t in P4 (it’s not mine before panic erupts) a damn good glaring at interspersed with some choice nautical expletives........ Alan Titchmarsh's dad told him that every job needs a good coat of looking at before you start! Jim Link to post Share on other sites More sharing options...
richbrummitt Posted June 28, 2021 Share Posted June 28, 2021 An attempt to get back on thread: I have 4 off 2-522 that I will never build. The mouldings mean these are only suitable for vans that had planked wooden doors fitted from 1927- , and whilst it is possible to rework the doors to make a gpv I don’t need (m)any of those. Let me know if they are of use, anybody. Link to post Share on other sites More sharing options...
exventurer Posted June 28, 2021 Share Posted June 28, 2021 9 hours ago, richbrummitt said: An attempt to get back on thread: I have 4 off 2-522 that I will never build. The mouldings mean these are only suitable for vans that had planked wooden doors fitted from 1927- , and whilst it is possible to rework the doors to make a gpv I don’t need (m)any of those. Let me know if they are of use, anybody. If they are still available I would be only too pleased to relieve you of them. PM to follow. Link to post Share on other sites More sharing options...
Valentin Posted July 18, 2021 Share Posted July 18, 2021 Do we have a "For Sale" thread? If so, please point it to me and I will move this post over there. If anyone is interested in a partly assembled N/S etched replacement chassis designed by Nigel Hunt to fit the L&Y/LMS/BR Aspinall 0-6-0T white metal body from GEM / Lytchett Manor, please send me a private message. The two BA12 nuts mentioned in the instructions are soldered to the motor mount. The chassis, the coupling rods and the wheel are painted black. The frames are completely isolated from each other and from the spacers (on 200Mohms scale, the multimiter shows infinite resistance). I wanted to build this kit to get "hands-on" experience in using the etched N/S spacers together with very thin double-sided PCB. I manged to put the gears and the rear driving wheels in place, but I wasn't happy with the result so I gave up before ruining the chassis (I am very good with this). As I mentioned a couple of times before, these etched N/S kits are not for me! Everything in the pictures below, plus the acetal whorm, for £20.00 + P&P (approx. £3.00 if using Hermes). Included: the six 9mm Mk4 driving wheels to which I have already soldered the counter-weights (the crank pin is broken on one wheel) the two muffs - one 3-102a and one 3-102b Gearset: 100DP: 30:1 Skew Brass Gear 1/8" Bore: Acetal Worm 1.5mm Bore; this may be 3-367, but I may be wrong (the worm wheel has 30 teeth, though) Spur Gear Brass M0.3 14T 3.0mm bore 3-390 Spur Gear Brass M0.3 25T 3.0mm bore 3-395 Maybe a more experienced modeller can get something usefull from these bits. 1 Link to post Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted July 18, 2021 RMweb Premium Share Posted July 18, 2021 It does seem to be a pity as you have done most of the hard work. However, I have to say it took me 25 years and maybe a dozen attempts before I managed to get a chassis working the way I was hoping for. Link to post Share on other sites More sharing options...
Ian Smith Posted July 18, 2021 Share Posted July 18, 2021 Valentin, Sorry to hear that you feel that you are unable to complete your chassis. Like Ian it took me an age to get a 2FS chassis running the way I wanted / expected. I tried 2FS in the 1980’s / early 90’s (long before etched chassis were available), I attempted 3 different locos in that period and gave up with them all, and subsequently 2mm modelling altogether. When I came back to railway modelling Jerry convinced me to try 2FS again with an Association chassis. I nearly gave up again as it took me 3 attempts to get it assembled and running reasonably! However, I was determined so persevered and was able to get my 2mm scale eye in as it were - I found getting used to the small size took me a while, but over the last few years my confidence has grown and I now feel comfortable trying to model in 2mm scale. I hope that you too will be able to overcome your setbacks too. As Ian says, it looks like you’ve done most of the hard work. Ian 1 Link to post Share on other sites More sharing options...
RMweb Premium nick_bastable Posted July 19, 2021 RMweb Premium Share Posted July 19, 2021 1 hour ago, Ian Smith said: Valentin, Sorry to hear that you feel that you are unable to complete your chassis. Like Ian it took me an age to get a 2FS chassis running the way I wanted / expected. I tried 2FS in the 1980’s / early 90’s (long before etched chassis were available), I attempted 3 different locos in that period and gave up with them all, and subsequently 2mm modelling altogether. When I came back to railway modelling Jerry convinced me to try 2FS again with an Association chassis. I nearly gave up again as it took me 3 attempts to get it assembled and running reasonably! However, I was determined so persevered and was able to get my 2mm scale eye in as it were - I found getting used to the small size took me a while, but over the last few years my confidence has grown and I now feel comfortable trying to model in 2mm scale. I hope that you too will be able to overcome your setbacks too. As Ian says, it looks like you’ve done most of the hard work. Ian Valentins a nice guy Im sure Martin Paul and I will be having encouraging words with him at the next months group meet. Like me he get deterred given Im on attempt No whatever to convert a Farish 3f although Ive already done one . Valentin has built a beautiful C class etch which ran very well but like me fiddled and broke it ( we all learn ) In retrospect should have left the 3f alone when it first worked Nick B 1 1 Link to post Share on other sites More sharing options...
Ian Smith Posted July 19, 2021 Share Posted July 19, 2021 9 hours ago, nick_bastable said: Valentins a nice guy Im sure Martin Paul and I will be having encouraging words with him at the next months group meet. Like me he get deterred given Im on attempt No whatever to convert a Farish 3f although Ive already done one . Valentin has built a beautiful C class etch which ran very well but like me fiddled and broke it ( we all learn ) In retrospect should have left the 3f alone when it first worked Nick B Nick, I have met Valentin a few times and agree he is a thoroughly nice guy. I was hoping my message would come across as supportive. I’m glad he has access to an area group to lend support! Like many, I too have felt the need to tinker with something that is already acceptable and actually made things worse. In those events I always tell myself that having got it to run once I can do it again. Although sometimes putting it aside for a day or few to allow the frustrations to subside is necessary! Ian 1 Link to post Share on other sites More sharing options...
Caley Jim Posted July 19, 2021 Share Posted July 19, 2021 28 minutes ago, Ian Smith said: Like many, I too have felt the need to tinker with something that is already acceptable and actually made things worse. In those events I always tell myself that having got it to run once I can do it again. Although sometimes putting it aside for a day or few to allow the frustrations to subside is necessary! Been there, done that and got the T-shirt! Many a time and oft as they say. I try to stick to the mantra 'if it ain't bust don't fix it ', but the temptation is always there to just make that wee adjustment that will make all the difference. In my experience, the satisfaction of getting a chassis running doesn't diminish, no matter how many you do, or maybe its surprise that you've got away with it, again! Jim 1 1 1 Link to post Share on other sites More sharing options...
Valentin Posted July 20, 2021 Share Posted July 20, 2021 (edited) Thank you all for your kind words and encouragement. As I said it before, I have no intention in giving up 2mm modelling. Since I joined the Association 10 year ago, I had far too many attempts in getting a working etched N/S chassis. Apart from the "Fence Houses Model Foundry" 0-6-0 'Universal' chassis which sits under the Class C Nick mentioned, I failed with the others. I enjoy much more trying to scratch build a solid brass milled chassis - the first results are encouraging. As a bonus, the brass bars and P/B strips are much cheaper than the etched N/S or brass chassis kits. I am repeating myself, just to be clear: I DO NOT criticise in any way the work of those who are making the etched N/S chassis available, they are just not for me. PS: the L&Y chassis has found a new home now. Edited July 20, 2021 by Valentin 2 Link to post Share on other sites More sharing options...
RMweb Premium PaulCheffus Posted July 26, 2021 RMweb Premium Share Posted July 26, 2021 (edited) Hi Does anyone have the old Taylor Precision Models 1824 assorted brake wheel etch in their gloatbox and hasn’t used the large six spoke wheels (on the left in the image below)? Note the large wheels in the later 1824a etch are larger than these. If so would it be possible to purchase these below from you. Cheers Paul Edited July 26, 2021 by PaulCheffus Link to post Share on other sites More sharing options...
justin1985 Posted August 21, 2021 Share Posted August 21, 2021 (edited) I've come to the conclusion I'm never going to get the chance to build any of the "modern" 2mm kits that I've picked up, so if anyone wants them, happy to arrange a swap or sale ... Stephen Harris Freightliner set - complete set of inners and outers. Absolutely beautiful etch, but I really can't see a use for it myself now. Instructions in an email I can forward. I've also got a full set of ATM moulded plastic Ridecontrol bogies to go with them, with the correct small (N gauge) wheels, no couplings - happy to sell together or separately. I've also got 2 each of Stephen Harris Catfish and Dogfish, if anyone wants them? Justin Edit - Catfish and Dogfish now spoken for! Edited August 22, 2021 by justin1985 1 Link to post Share on other sites More sharing options...
A. Bastow Posted December 11, 2021 Share Posted December 11, 2021 (edited) I have the following in my pile of shame that I wish to relieve myself of. To exchange; 3x etches for a generic 9ft wheelbase wagon 2x etches of suitable axle boxes for the above - a third will be needed to complete all three chassis. 1x GEM N/2mm Jinty body kit, virtually pristine. Wants; A Raithby 4F kit, as they have disappeared from the association shop. Many thanks in advance. Edited December 11, 2021 by A. Bastow Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted May 9, 2022 RMweb Premium Share Posted May 9, 2022 Does anyone have an etch for a NER 4125 gallon self trimming tender? They were originally shot down by Mick Simpson from Steve Barnsfield’s artwork. Tim Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted May 18, 2022 RMweb Premium Share Posted May 18, 2022 All sorted, thanks. Tim 1 Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted August 18, 2022 RMweb Premium Share Posted August 18, 2022 Does anyone have an old style Graham Farish 57xx chassis block surplus to requirements? A non-working chassis is perfectly acceptable. Our GNR J13 (LNER J52) is completely worn out and the simplest solution is a chassis transplant. Tim Link to post Share on other sites More sharing options...
Jayk Posted August 18, 2022 Share Posted August 18, 2022 6 hours ago, CF MRC said: Does anyone have an old style Graham Farish 57xx chassis block surplus to requirements? A non-working chassis is perfectly acceptable. Our GNR J13 (LNER J52) is completely worn out and the simplest solution is a chassis transplant. Tim Possibly. Would it be a one of these? I have a body but it's sans cab. Upper magnet is rather rusty and it looks like the upper half of the body catch on the rear is either missing or has been squashed down onto the lower half. Had a quick peep at the upper brush / spring / collet and all looks clean and surprisingly unused. -Jayk Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted August 18, 2022 RMweb Premium Share Posted August 18, 2022 Could well be. I only really need the cast chassis so everything else is not essential. Tim Link to post Share on other sites More sharing options...
Lacathedrale Posted November 3, 2022 Share Posted November 3, 2022 Does anyone have any spare 10mm wheels Mk IV or Mk V that they'd be willing to swap for 9mm Mk.IV ones? Link to post Share on other sites More sharing options...
Valentin Posted January 22, 2023 Share Posted January 22, 2023 Hello, Is anyone interested in a Push-Pull (SR ?), etched brass kit? I got it from Andrew Cox for a tenner, about 10 years ago. Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted April 6, 2023 RMweb Premium Share Posted April 6, 2023 Does anyone have an original Mike Bryant (made by Geoff Jones) plastic UJ? These were made in the late 1970s. I actually only need the ball & pin male component. The current Association set is not appropriate for the job in hand. Tim Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now