Porcy Mane Posted June 25 Share Posted June 25 (edited) That indicates to me your thoughts are not cast in stone and there's indecision in what route to take. (and then, on the face of it, there's the bits that's missing but I can't get my headboard around that). P Edited June 25 by Porcy Mane Link to post Share on other sites More sharing options...
45125 Posted June 25 Share Posted June 25 1 hour ago, The Stationmaster said: A bit worrying to see two distinctly non-RSH original 'as delivered' features on that loco. (and I don't include in that what appear to be altered lamp brackets). Is there not three non original features?......... No1 end lost one of the features some time ago. Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted June 25 RMweb Gold Share Posted June 25 2 hours ago, 45125 said: Is there not three non original features?......... No1 end lost one of the features some time ago. I was looking at the two subtle ones - there are others. Link to post Share on other sites More sharing options...
Southernman46 Posted June 25 Share Posted June 25 1 hour ago, The Stationmaster said: I was looking at the two subtle ones - there are others. Are you grilling us on this ? 😉 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted June 25 RMweb Gold Share Posted June 25 19 hours ago, Porcy Mane said: Would you also like the surrounding vegetation included in the accessory pack? 😉 I notice there's a chain over the buffer on the secondman's side to stop anybody from nicking it! 2 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted June 25 RMweb Gold Share Posted June 25 (edited) 20 hours ago, Porcy Mane said: Would you also like the surrounding vegetation included in the accessory pack? 😉 A big chain hanging around the buffer, are they worried someones going to nick the 37 and take it for a joy ride ? Edited June 25 by adb968008 Edit great minds think alike. 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted June 25 RMweb Gold Share Posted June 25 7 hours ago, The Stationmaster said: A bit worrying to see two distinctly non-RSH original 'as delivered' features on that loco. (and I don't include in that what appear to be altered lamp brackets). Were actually missing quite a lot here to be close to accurate… 1. Headboard clips 2. oval buffers 3. buffer cowling 4. bang plate 5. headcode panel 6. lamp bracket change i wasnt sure about the single ohle flash but thats apparently correct. Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted June 25 RMweb Gold Share Posted June 25 6 minutes ago, adb968008 said: Were actually missing quite a lot here to be close to accurate… 1. Headboard clips 2. oval buffers 3. buffer cowling 4. bang plate 5. headcode panel 6. lamp bracket change i wasnt sure about the single ohle flash but thats apparently correct. Think it got replacement buffer cowlings, though it's surprising they didn't restore the headcode panels. 1 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted June 25 RMweb Gold Share Posted June 25 It did 2 Link to post Share on other sites More sharing options...
45125 Posted June 25 Share Posted June 25 33 minutes ago, adb968008 said: Were actually missing quite a lot here to be close to accurate… 1. Headboard clips 2. oval buffers 3. buffer cowling 4. bang plate 5. headcode panel 6. lamp bracket change i wasnt sure about the single ohle flash but thats apparently correct. When new it wouldn't have had the bang plate, oval buffers or dual braked. It did have headboard clips/lamp bracket, head code panel and a steam heat bag when new Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted June 25 RMweb Gold Share Posted June 25 Just to help here's my photo of it taken when it was as near brand new as made little difference. Now try to spot the other differences from its present condition but they are subtle although one of them was a very easy instant way to tell the RSH locos from the Vulcan build - 6 1 Link to post Share on other sites More sharing options...
Porcy Mane Posted June 26 Share Posted June 26 23 hours ago, Porcy Mane said: That indicates to me your thoughts are not cast in stone and there's indecision in what route to take. (and then, on the face of it, there's the bits that's missing but I can't get my headboard around that). Don't blame it on the boogies. 1 2 Link to post Share on other sites More sharing options...
RBAGE Posted July 2 Share Posted July 2 On 25/06/2024 at 09:10, Accurascale Fran said: Hi @virginhst539, They're on their way and due in the coming weeks, so you can pay any time between now and arrival if you wish. We like to give fair warning so you can arrange finances if needs be! Cheers! Fran Great news. If you wouldn't mind telling us the name of the ship we could track it.🤣 Link to post Share on other sites More sharing options...
NickL2008 Posted July 2 Share Posted July 2 1 hour ago, RBAGE said: Great news. If you wouldn't mind telling us the name of the ship we could track it.🤣 Well one week down, so should be bit closer now 🤞 NL Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted July 2 RMweb Gold Share Posted July 2 There’s a bit of a hold up if they’re coming via Felixstowe due to track damage following a derailment. Several Sheds are stuck there, of the full size variety! 1 1 Link to post Share on other sites More sharing options...
virginhst539 Posted July 5 Share Posted July 5 Must be due very soon as the payment mails have popped into the inbox Link to post Share on other sites More sharing options...
Craig1989 Posted July 5 Share Posted July 5 I’ve had the email for 37405 harry needle but on holiday and can’t remember my login details so will pay over the weekend as back tomorrow night cheers Craig Link to post Share on other sites More sharing options...
Rugd1022 Posted July 5 Share Posted July 5 On 26/06/2024 at 00:34, The Stationmaster said: Just to help here's my photo of it taken when it was as near brand new as made little difference. Now try to spot the other differences from its present condition but they are subtle although one of them was a very easy instant way to tell the RSH locos from the Vulcan build - Your photo has reminded me that it's almost twenty years since my brother and I finished off '198 at Leeming Bar by applying the tops numbers, data panels and depot stickers after its full repaint into banger blue! 3 1 Link to post Share on other sites More sharing options...
classy52 Posted July 7 Share Posted July 7 Hi Accurascale, I'm sure this has been brought up previously but can't remember the outcome but are you introducing a working fan for the Class 37 that's synched with the decoder sound file? If yes, will this be introduced beyond the 2nd run which doesn't appear to have it and if that's a yes will there be provision to retro-fit to the existing 1st & 2nd run 37's providing the plug is present on the PCB? Cheers Steve Link to post Share on other sites More sharing options...
RMweb Gold Kaput Posted July 7 RMweb Gold Share Posted July 7 Considering the location of the fan and the size of the chassis block I'd be surprised if a motorised fan could be done without major retooling of the chassis to fit the motor. 1 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted July 8 Author Accurascale staff Share Posted July 8 20 hours ago, classy52 said: Hi Accurascale, I'm sure this has been brought up previously but can't remember the outcome but are you introducing a working fan for the Class 37 that's synched with the decoder sound file? If yes, will this be introduced beyond the 2nd run which doesn't appear to have it and if that's a yes will there be provision to retro-fit to the existing 1st & 2nd run 37's providing the plug is present on the PCB? Cheers Steve Hi Steve, Yes and yes. I don't think it could be retrofitted to run 1 and 2 without major surgery, but I'm sure someone will have a go. News on run 3 soon after run 2 arrives! Cheers! Fran 6 1 1 1 3 Link to post Share on other sites More sharing options...
Krieghoff Posted July 8 Share Posted July 8 3 hours ago, Accurascale Fran said: Hi Steve, Yes and yes. I don't think it could be retrofitted to run 1 and 2 without major surgery, but I'm sure someone will have a go. News on run 3 soon after run 2 arrives! Cheers! Fran This lot just seems to get better and better with each run. Well Done Fran et al 🙏🙏🙏🇬🇧🇬🇧🇬🇧👍👍👍👍 1 Link to post Share on other sites More sharing options...
RMweb Premium nightstar.train Posted July 8 RMweb Premium Share Posted July 8 Can the Accurascale guys give a better idea of when the 37s will be landed and start shipping? I only ask as I’m away for the next couple of weeks and don’t want to miss it, or miss an email from DHL to rearrange delivery and it end up stuck in parcel purgatory. 1 Link to post Share on other sites More sharing options...
RMweb Premium E100 Posted July 8 RMweb Premium Share Posted July 8 35 minutes ago, nightstar.train said: Can the Accurascale guys give a better idea of when the 37s will be landed and start shipping? I only ask as I’m away for the next couple of weeks and don’t want to miss it, or miss an email from DHL to rearrange delivery and it end up stuck in parcel purgatory. If in doubt I've been able to message support in the past and they basically put it in purgatory at their end. It was then shipped when I confirmed I was able to receive shipments again. 2 1 Link to post Share on other sites More sharing options...
Accurascale staff McC Posted July 8 Accurascale staff Share Posted July 8 15 minutes ago, E100 said: If in doubt I've been able to message support in the past and they basically put it in purgatory at their end. It was then shipped when I confirmed I was able to receive shipments again. Exactly this. Drop us a line and we can simply hold the parcel. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now