Accurascale staff McC Posted September 11, 2023 Accurascale staff Share Posted September 11, 2023 2 minutes ago, Glencoe Model Railway said: Any word on the speaker clips being sent out? I ordered 5 packs for all my retrofit versions but still says unfulfilled about a week later, which is quite unusual. Also waiting on a sound 37606 being dispatched whilst the 37027 I ordered the same day has already been delivered? Cheers Have you reached out to support? https://www.accurascale.com/pages/support Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted September 11, 2023 RMweb Gold Share Posted September 11, 2023 I’m currently getting my original sound decoder exchanged for one with the update and I am gratified to know the following: 😄 6 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted September 11, 2023 RMweb Gold Share Posted September 11, 2023 2 hours ago, Glencoe Model Railway said: Any word on the speaker clips being sent out? I ordered 5 packs for all my retrofit versions but still says unfulfilled about a week later, which is quite unusual. I had dispatch notification on mine 10 minutes ago. 1 Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted September 11, 2023 Share Posted September 11, 2023 Literally just got mine too! Guess the speed they sold out at means they are extremely popular. It means they will be here for my annual leave next week so will have plenty time to fit them. Cheers 2 Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted September 11, 2023 Share Posted September 11, 2023 2 hours ago, McC said: Have you reached out to support? https://www.accurascale.com/pages/support I will do for the 37/6 but fortunately got the email for the clips. That reminds me, need to open the box with the MGR hoppers in! 1 Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted September 11, 2023 Share Posted September 11, 2023 All I needed was a bit more patience. Got the dispatch email for the 37 too! Delighted customer. Now just need to decide what to spend my credits on….. Link to post Share on other sites More sharing options...
GBRf 66 The Flying Dustman Posted September 11, 2023 Share Posted September 11, 2023 Just need the Rails of Sheffield 37/610 now to be sent out to the customers who have pre ordered it with them Link to post Share on other sites More sharing options...
RMweb Gold 55020 Posted September 11, 2023 RMweb Gold Share Posted September 11, 2023 So many of the posts on this thread make it such a difficult read. There's too much unique and personal stuff that would be better directed towards Accurscale support on their website. Please give Fran and the guys a break, as basic support isn't their role and these posts run the risk that we will stop getting the kind of AS presence we've become used to. Steve 5 12 Link to post Share on other sites More sharing options...
CazRail Posted September 11, 2023 Share Posted September 11, 2023 My 37605 and 607 arrives safely today, and wow! They are the dog's doo-daahs. Only query is, both mine seem to squeak as if they need lubricating, has anyone else had this? Link to post Share on other sites More sharing options...
RMweb Premium LMSfan72 Posted September 11, 2023 RMweb Premium Share Posted September 11, 2023 My 602 exhibited squeaking on my rolling road running in. Video is with the Accurascale team for advice. Very fast acknowledging via chat support 1 Link to post Share on other sites More sharing options...
CazRail Posted September 12, 2023 Share Posted September 12, 2023 4 hours ago, LMSfan72 said: My 602 exhibited squeaking on my rolling road running in. Video is with the Accurascale team for advice. Very fast acknowledging via chat support Would you mind possibly posting their response here please? Would really appreciate. Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted September 12, 2023 RMweb Gold Share Posted September 12, 2023 14 hours ago, 97406 said: I’m currently getting my original sound decoder exchanged for one with the update and I am gratified to know the following: 😄 Joking aside, I really like the fact that Accurascale raise an order in such cases. I have had returns with other manufacturers where you don’t know what is happening until you get a knock on the door, sometime a long time after the return. Roy 2 5 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted September 12, 2023 RMweb Gold Share Posted September 12, 2023 On 08/09/2023 at 22:20, Cliff - Exeter TMD said: Yes, the decoder I purchased last week is fixed in regard to what you mention, but there is still one slight minor issue. The desk lights are permanently on at both ends as soon as you apply power to the track. F19 will not switch them off. A minor niggle that does not bother me too much........not enough to send it back. I had that problem with my AS decoder and it was because it wasn’t pushed home properly. It’s a tight fit between the rows of jumper plugs and it should fit snugly in between them, not sitting at an angle. 2 Link to post Share on other sites More sharing options...
Tony Walker Posted September 12, 2023 Share Posted September 12, 2023 Here's a short video of 37602 leaving a red light and pulling away with a nuclear flask delivery. 8 Link to post Share on other sites More sharing options...
RMweb Premium E100 Posted September 12, 2023 RMweb Premium Share Posted September 12, 2023 Had my decoder back and all is now working (flange squeal) and I don't have the issue with the desk lights. Anyone know how to relock the chip to these settings if I were to need to CV8 in the future? 1 Link to post Share on other sites More sharing options...
RMweb Premium LMSfan72 Posted September 12, 2023 RMweb Premium Share Posted September 12, 2023 9 hours ago, CazRail said: Would you mind possibly posting their response here please? Would really appreciate. Loco actually going back to Accurascale for another reason Link to post Share on other sites More sharing options...
St. Simon Posted September 12, 2023 Share Posted September 12, 2023 Hi, Any ideas when the speaker clips are going to come back into stock? Simon 1 Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted September 12, 2023 RMweb Gold Share Posted September 12, 2023 1 hour ago, Tony Walker said: Here's a short video of 37602 leaving a red light and pulling away with a nuclear flask delivery. Thanks for this. Great when the parts all come together. Hopefully will get 602 and 609 from retailer before 'not too long'. Then: Albeit 602 not quite the same livery 3 Link to post Share on other sites More sharing options...
SRman Posted September 12, 2023 Share Posted September 12, 2023 1 hour ago, zr2498 said: Thanks for this. Great when the parts all come together. Hopefully will get 602 and 609 from retailer before 'not too long'. Then: Albeit 602 not quite the same livery Perfect: I have both 602 and 609 due from retailers soon, I have the flask wagons, and I model mostly Southern Region! 😎 Engaging smug mode. 1 Link to post Share on other sites More sharing options...
RMweb Premium scissors Posted September 12, 2023 RMweb Premium Share Posted September 12, 2023 17 hours ago, CazRail said: My 37605 and 607 arrives safely today, and wow! They are the dog's doo-daahs. Only query is, both mine seem to squeak as if they need lubricating, has anyone else had this? Yes my 37043 squeaks too. I've not looked into the cause but it does seem to be one squeak per wheel rotation. 1 Link to post Share on other sites More sharing options...
CazRail Posted September 12, 2023 Share Posted September 12, 2023 (edited) 2 hours ago, scissors said: Yes my 37043 squeaks too. I've not looked into the cause but it does seem to be one squeak per wheel rotation. Mine sounded like the bearings either side of the worm gear were dry, so I'm in the middle of cleaning them up and re-lubricaring them to see if that'll do it. Edited September 12, 2023 by CazRail Link to post Share on other sites More sharing options...
Tony Walker Posted September 12, 2023 Share Posted September 12, 2023 Just for a bit of fun. How to avoid the problem with an Accurascale 37 when pushing an inspection saloon, when you can't turn off the front lights. Simple - pull another inspection saloon! 3 Link to post Share on other sites More sharing options...
ac1874 Posted September 12, 2023 Share Posted September 12, 2023 Has anybody had 37609 from Accurascale direct yet? Link to post Share on other sites More sharing options...
derekdoestrains Posted September 12, 2023 Share Posted September 12, 2023 55 minutes ago, ac1874 said: Has anybody had 37609 from Accurascale direct yet? Or 37608 for that matter 😂 1 Link to post Share on other sites More sharing options...
XChris Posted September 12, 2023 Share Posted September 12, 2023 On 11/09/2023 at 18:37, GBRf 66 The Flying Dustman said: Just need the Rails of Sheffield 37/610 now to be sent out to the customers who have pre ordered it with them I have my pre-order with them and haven’t even been charged the second payment yet, I would have thought an email would have been sent or guidance? In terms of 608, my order of 602, 608 & 609 hasn’t been dispatched, I’m assuming that 608 is holding them back. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now