SRman Posted August 28, 2023 Share Posted August 28, 2023 And I have been at it again with the LokProgrammer. This time, it is with a Legomanbiffo sound project intended for 37 026 when it arrives in the near future. I used 37 423 as the mule to reblow the blank ESU decoder I had for this project, so was able to test it out with the full Accurascale speaker setup. I think it is his West Highland file, and it does sound very good, but I found the lighting functions were all different from the Accurascale, and different to what I had modified on 37 423 the bring some of the functions into line with other locos on my layout (it makes it much easier to remember without having to dig out the function lists). Because the changes were a major rearrangement, to avoid confusion during the operation I created a spreadsheet with the existing functions listed and an extra column showing the intended function number after swapping it all around. I still had to be extra careful where multiple functions were involved for particular conditions, but I think it has worked overall. I also put the brake function on F2, again to bring it into line with 37 423 (amongst others), which meant reassigning the horns to F3 and F4, which meant reassigning the coupling sounds from F4 to F14 ... you get the gist! F11 had to be the flange squeal, again to bring it into line with 37 423. Just in case it all went wrong, I did the belt and braces solution of saving the modified file under a different name as well as keeping a full reset in reserve. Thankfully, I don't think that will be necessary. I haven't even looked at the Jamie Goodman file I have for 37 609 when that arrives. I have been making the rod for my own back, but I think it is all worth it in the long term, plus it has kept me on my toes, mentally. 3 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted August 28, 2023 RMweb Gold Share Posted August 28, 2023 Well ive 9 Accurascale 37’s so far, and all are perfect. 2 2 Link to post Share on other sites More sharing options...
Popular Post cairnsroadworks Posted August 28, 2023 Popular Post Share Posted August 28, 2023 I managed to fit the detailing parts very easily to all 5 I’ve had so far. Echo what others have said about them nesting nicely in the holes with no drilling required. I left the bufferbeams in place but just carefully pulled out the buffers from their housing. That way I was able to change the buffers on 402 as well so they’re the right way round. Prototypical weathering completed from reference photos. 27 5 Link to post Share on other sites More sharing options...
50033 Posted August 28, 2023 Share Posted August 28, 2023 I have recently added 37051 which was a DCC ready that I’ve upgraded to DCC sound via Accurascale recent release of sound chips. I went for refurbished but now think it might need to be unrefubished. Was 051 refurbished or have I made the mistake of getting the wrong chip. Link to post Share on other sites More sharing options...
rob D2 Posted August 28, 2023 Share Posted August 28, 2023 (edited) 33 minutes ago, 50033 said: I have recently added 37051 which was a DCC ready that I’ve upgraded to DCC sound via Accurascale recent release of sound chips. I went for refurbished but now think it might need to be unrefubished. Was 051 refurbished or have I made the mistake of getting the wrong chip. It wasn't , so i think you have wrong noise . Refurbs were 37/5, /6, /7/8 i'm not sure if the /4s also made the refurb noise after rebuild as /4s Edited August 28, 2023 by rob D2 Link to post Share on other sites More sharing options...
50033 Posted August 28, 2023 Share Posted August 28, 2023 Oh ok. Thanks for that. 🤦♂️. Link to post Share on other sites More sharing options...
XChris Posted August 28, 2023 Share Posted August 28, 2023 My final 4 from the first batch should be with me soon then!! Hope I can try sneak a 97301 when they are done sending out the pre orders! Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted August 28, 2023 RMweb Gold Share Posted August 28, 2023 1 hour ago, XChris said: My final 4 from the first batch should be with me soon then!! Hope I can try sneak a 97301 when they are done sending out the pre orders! Ditto re 97301. I guess there will be a rather long queue. Perhaps it will get another production run, or ano Network Rail Liveried 37. 1 1 Link to post Share on other sites More sharing options...
meanach Posted August 28, 2023 Share Posted August 28, 2023 5 hours ago, rob D2 said: It wasn't , so i think you have wrong noise . Refurbs were 37/5, /6, /7/8 i'm not sure if the /4s also made the refurb noise after rebuild as /4s Yes they did as the English electric generator was replaced by a Brush BA1005A alternator. The starter motor and warm up are different on the refurb. The amps also load up differently to a 37/0. 37/3 . It all depends just how good your hearing is though , as bar the start up I think you’d really have to have an acute sense of hearing to be able to tell instantly in model form. 2 Link to post Share on other sites More sharing options...
RMweb Premium reddragon Posted August 28, 2023 RMweb Premium Share Posted August 28, 2023 What has happened to 37001? Was supposed to be in batch 1, are there any updates on this one? Maybe I picked the longest wait one to order 🤔 Link to post Share on other sites More sharing options...
Haverail Posted August 28, 2023 Share Posted August 28, 2023 31 minutes ago, reddragon said: What has happened to 37001? Was supposed to be in batch 1, are there any updates on this one? Maybe I picked the longest wait one to order 🤔 I believe they were due in today and so should start being delivered during this week :-) 1 2 Link to post Share on other sites More sharing options...
Melton Works Posted August 29, 2023 Share Posted August 29, 2023 18 hours ago, cairnsroadworks said: I managed to fit the detailing parts very easily to all 5 I’ve had so far. Echo what others have said about them nesting nicely in the holes with no drilling required. I left the bufferbeams in place but just carefully pulled out the buffers from their housing. That way I was able to change the buffers on 402 as well so they’re the right way round. Prototypical weathering completed from reference photos. Excellent job there 👍👍 1 Link to post Share on other sites More sharing options...
atom3624 Posted August 29, 2023 Share Posted August 29, 2023 Must be a total of 4 or 5 hours' circulating on the rails now, and 37 043 has been faultless - job done. Al. 1 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 29, 2023 RMweb Gold Share Posted August 29, 2023 A friend brought a large loco Scotrail example into the club last night and I was really impressed. The presence and the feeling of 'heaviness' was very apparent. It is a very impressive model and if I had any lingering doubts about ordering one of the green SYP centre headcode versions in the forthcoming batch, then they were well and truly dispelled. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted August 29, 2023 RMweb Gold Share Posted August 29, 2023 Oh and a question for the Accurascale chaps - will retailers be able to supply the P4 wheelsets for the Class 37, or should they be ordered direct from yourselves, please? Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted August 29, 2023 Share Posted August 29, 2023 On 26/08/2023 at 22:18, Dunmar said: I've waited this long Eddie! A few days days more ain't goin' to matter! Bill. Just to confirm, Bill, I’ve updated the decoders on the Lokprogrammer and the flange squeal works on all 4 locos for the WHL project. Need to do the DRS ones next. Cheers Eddie 1 Link to post Share on other sites More sharing options...
RMweb Premium reddragon Posted August 29, 2023 RMweb Premium Share Posted August 29, 2023 (edited) 14 hours ago, Haverail said: I believe they were due in today and so should start being delivered during this week :-) I wondered because the announcement only mentions the 3 green ones and not 37001. Edited August 29, 2023 by reddragon Link to post Share on other sites More sharing options...
Dunmar Posted August 29, 2023 Share Posted August 29, 2023 1 hour ago, Glencoe Model Railway said: Just to confirm, Bill, I’ve updated the decoders on the Lokprogrammer and the flange squeal works on all 4 locos for the WHL project. Need to do the DRS ones next. Cheers Eddie Hi Eddie, Still not had a reply from ACCURASCALE, getting a bit p!!** off with them to say the least! If it's not too much bother let me know how you fixed it. Will also get one of my colleagues to look into same as they might spot what's wrong! Cheers, Bill. Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted August 29, 2023 Author Accurascale staff Share Posted August 29, 2023 Hi everyone, Well, we've been hit for 6 this morning. 37/6 that is! Oh, and 97301 is in there too! Usual caveats of breaking the pallets down, counting into stock, QC check etc but expect to see them heading out to customers and retailers later this week. @Captain Kernow the wheelsets didnt seem to attract much interest with retailers when first mooted so we decided to just stock them direct only and keep the prices keen as possible. Cheers! Fran 8 1 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted August 29, 2023 Author Accurascale staff Share Posted August 29, 2023 Just now, Dunmar said: Hi Eddie, Still not had a reply from ACCURASCALE, getting a bit p!!** off with them to say the least! If it's not too much bother let me know how you fixed it. Will also get one of my colleagues to look into same as they might spot what's wrong! Cheers, Bill. Hi Bill, Sorry to hear this. Could you send me a private message with your email address and query and I will personally look into it for you. Many thanks, Fran 1 Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted August 29, 2023 Share Posted August 29, 2023 2 minutes ago, Dunmar said: Hi Eddie, Still not had a reply from ACCURASCALE, getting a bit p!!** off with them to say the least! If it's not too much bother let me know how you fixed it. Will also get one of my colleagues to look into same as they might spot what's wrong! Cheers, Bill. It was just a firmware update that did it. The Lokprogrammer did it automatically when it was programming the address and sound volume. Cheers Eddie Link to post Share on other sites More sharing options...
Dunmar Posted August 29, 2023 Share Posted August 29, 2023 1 minute ago, Glencoe Model Railway said: It was just a firmware update that did it. The Lokprogrammer did it automatically when it was programming the address and sound volume. Cheers Eddie Cheers Eddie, Think I may have finally got a response! Bill. 1 Link to post Share on other sites More sharing options...
Dunmar Posted August 29, 2023 Share Posted August 29, 2023 6 minutes ago, Accurascale Fran said: Hi Bill, Sorry to hear this. Could you send me a private message with your email address and query and I will personally look into it for you. Many thanks, Fran Hi, Will do, soon as I get back to base! Bill. 1 Link to post Share on other sites More sharing options...
Glencoe Model Railway Posted August 29, 2023 Share Posted August 29, 2023 That’s great news Bill. Once it’s working, you’ll love the noise they make. I’m tempted to put more points on the layout just to run them through! Seriously though, it’s the best sound file for a 37 by far. Cheers 1 Link to post Share on other sites More sharing options...
RMweb Premium nightstar.train Posted August 29, 2023 RMweb Premium Share Posted August 29, 2023 9 minutes ago, Accurascale Fran said: Hi everyone, Well, we've been hit for 6 this morning. 37/6 that is! Oh, and 97301 is in there too! Usual caveats of breaking the pallets down, counting into stock, QC check etc but expect to see them heading out to customers and retailers later this week. @Captain Kernow the wheelsets didnt seem to attract much interest with retailers when first mooted so we decided to just stock them direct only and keep the prices keen as possible. Cheers! Fran Awesome, can’t wait to get my Europhoenix one (via Rails so I’ll be waiting a while yet.) Fran are the green 37s, 37001 and the Locomotion D3600 in there as well, or are they still to arrive? I think this thread has got a little confused as to what’s arriving when, I certainly have 🤪 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now