RMweb Gold TravisM Posted October 25, 2022 RMweb Gold Share Posted October 25, 2022 If a second run is announced, any chance that 37901 in ROG livery could make an appearance if it’s not to difficult to alter the tooling? As it seems to making more and more foray’s onto the mainline, certainly nice to see it modelled. 5 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted October 25, 2022 RMweb Premium Share Posted October 25, 2022 11 minutes ago, jools1959 said: If a second run is announced, any chance that 37901 in ROG livery could make an appearance if it’s not to difficult to alter the tooling? As it seems to making more and more foray’s onto the mainline, certainly nice to see it modelled. Probably a good idea to get the sound files off it just incase the Mirrlees engine is swopped out since its unique,needs put on the too do list. 3 Link to post Share on other sites More sharing options...
YesTor Posted October 26, 2022 Share Posted October 26, 2022 (edited) I always liked 37516 minus its Loadhaul logos... LoadHaul Class 37/5 37516 - Milford Junction. by Martyn Hilbert, on Flickr Edited October 26, 2022 by YesTor 7 1 Link to post Share on other sites More sharing options...
The Black Hat Posted October 26, 2022 Share Posted October 26, 2022 Theres only one Loadhaul 37.... and this beauty needs a nice big Earth mover speaker! 4 2 Link to post Share on other sites More sharing options...
TomScrut Posted October 26, 2022 Share Posted October 26, 2022 13 hours ago, jools1959 said: If a second run is announced, any chance that 37901 in ROG livery could make an appearance if it’s not to difficult to alter the tooling? As it seems to making more and more foray’s onto the mainline, certainly nice to see it modelled. 901 is out playing today with 418 and Caroline Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted October 26, 2022 RMweb Gold Share Posted October 26, 2022 At the risk of dragging the thread off topic, I shall leave this here (again from Flickr)! Hint, hint, bogies…. 1 4 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted October 26, 2022 RMweb Premium Share Posted October 26, 2022 36 minutes ago, 97406 said: At the risk of dragging the thread off topic, I shall leave this here (again from Flickr)! Hint, hint, bogies…. The next few months will bring plenty bogies,mainly green,lets just get the 37,s here before we go to other classes eh,we are all different as the last few pages prove,love the colour,hate the colour......the lads have enough on the agenda,good things come to those who wait...... 1 1 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted October 26, 2022 RMweb Gold Share Posted October 26, 2022 26 minutes ago, ERIC ALLTORQUE said: The next few months will bring plenty bogies,mainly green,lets just get the 37,s here before we go to other classes eh,we are all different as the last few pages prove,love the colour,hate the colour......the lads have enough on the agenda,good things come to those who wait...... You ain’t seen me, roight? 6 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 The noticeably underscale wheels supplied with Accurascale's 'Deltic' – only 3ft diameter compared to the altogether heftier-looking 3ft 7ins of the real thing – are one of its least attractive features. The way the loco has been designed, it is difficult if not impossible to replace them with wheels of the correct diameter and still negotiate tighter-than-scale curves. As both Bachmann and ViTrains recognise, the wheels of a class 37 are also 3ft 7ins diameter. Would Fran like to confirm what diameter of wheels his model will use and if the same unfortunate compromise has once again been deemed necessary? I apologise if this issue has been clarified elsewhere in the topic but I have been unable to find a reference. Thanks, Bob Link to post Share on other sites More sharing options...
Porcy Mane Posted October 27, 2022 Share Posted October 27, 2022 39 minutes ago, RBAGE said: I apologise if this issue has been clarified elsewhere in the topic but I have been unable to find a reference. Dear Burb, Wakey, wakey. Loadsa references or from the website. 1 1 1 Link to post Share on other sites More sharing options...
RMweb Gold JohnR Posted October 27, 2022 RMweb Gold Share Posted October 27, 2022 3 minutes ago, Porcy Mane said: Dear Burb, Wakey, wakey. Loadsa references or from the website. I make that 3 feet and 6.6 inches. That is a SHOCKING 0.4inches smaller! Totally unacceptable, please cancel my subscription, etc... 1 14 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 12 minutes ago, JohnR said: I make that 3 feet and 6.6 inches. That is a SHOCKING 0.4inches smaller! Totally unacceptable, please cancel my subscription, etc... Well, drastic and immediate action was not what I expected. Just clarification from the manufacturer. Just as well I made my apologies first, I suppose. 1 1 Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted October 27, 2022 Author Accurascale staff Share Posted October 27, 2022 1 hour ago, RBAGE said: The noticeably underscale wheels supplied with Accurascale's 'Deltic' – only 3ft diameter compared to the altogether heftier-looking 3ft 7ins of the real thing – are one of its least attractive features. The way the loco has been designed, it is difficult if not impossible to replace them with wheels of the correct diameter and still negotiate tighter-than-scale curves. As both Bachmann and ViTrains recognise, the wheels of a class 37 are also 3ft 7ins diameter. Would Fran like to confirm what diameter of wheels his model will use and if the same unfortunate compromise has once again been deemed necessary? I apologise if this issue has been clarified elsewhere in the topic but I have been unable to find a reference. Thanks, Bob Hi Bob, Yes we can confirm that the 37 has the correct sized wheels. Thankfully getting the bodyshape right on the 37 does not hamper it on second radius curves, unlike the Deltic. Cheers! Fran 4 1 1 4 Link to post Share on other sites More sharing options...
RMweb Premium E100 Posted October 27, 2022 RMweb Premium Share Posted October 27, 2022 40 minutes ago, Accurascale Fran said: Hi Bob, Yes we can confirm that the 37 has the correct sized wheels. Thankfully getting the bodyshape right on the 37 does not hamper it on second radius curves, unlike the Deltic. Cheers! Fran Very much get the impression it's a decision where either option is bad for various reasons and it's the least bad of the two to be made. 2 5 Link to post Share on other sites More sharing options...
PieGuyRob Posted October 27, 2022 Share Posted October 27, 2022 Will the class 37's wheels fit in a Deltic? Just asking for a friend. 4 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 1 hour ago, PieGuyRob said: Will the class 37's wheels fit in a Deltic? Just asking for a friend. Has the therapy session started? 1 Link to post Share on other sites More sharing options...
PieGuyRob Posted October 27, 2022 Share Posted October 27, 2022 1 hour ago, RBAGE said: Has the therapy session started? It was more out of curiosity. I don't even own an Accurascale Deltic! Link to post Share on other sites More sharing options...
dj_crisp Posted October 27, 2022 Share Posted October 27, 2022 I wonder if Accurascale will have the same wheel size challenges with the 50 ;) To scale or not to scale. 1 6 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 1 hour ago, PieGuyRob said: It was more out of curiosity. I don't even own an Accurascale Deltic! Strange that. I don't even have a class 37 ordered. Might be nice though. Pre-TOPS, split headcode, blue, RHS, if anyone is listening. 6772 if you can manage it. 1 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 1 hour ago, dj_crisp said: I wonder if Accurascale will have the same wheel size challenges with the 50 ;) To scale or not to scale. Bit of Shakespear there? 2 Link to post Share on other sites More sharing options...
Porcy Mane Posted October 27, 2022 Share Posted October 27, 2022 12 minutes ago, RBAGE said: 6772 if you can manage it. ... and your preferred headcode? Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted October 27, 2022 RMweb Gold Share Posted October 27, 2022 Regarding the size of wheels and R2 curves. I wonder how many modellers likely to buy models like the Deltic or 37 have R2 curves on their layouts? I can see a case for it off-scene, but as a recent returnee to the field of modeling, I won’t go beneath 2’ radius. A couple of early Bachmann 40s have had the bogie swing restricted so they don’t knock the additional chassis detailing off, so they won’t get round R2 any more. It’s just something I’ve been pondering. 1 2 Link to post Share on other sites More sharing options...
RBAGE Posted October 27, 2022 Share Posted October 27, 2022 18 minutes ago, Porcy Mane said: ... and your preferred headcode? 9P30, if you can manage it. Much obligated. Link to post Share on other sites More sharing options...
RMweb Gold 55020 Posted October 27, 2022 RMweb Gold Share Posted October 27, 2022 8 minutes ago, 97406 said: Regarding the size of wheels and R2 curves. I wonder how many modellers likely to buy models like the Deltic or 37 have R2 curves on their layouts? I can see a case for it off-scene, but as a recent returnee to the field of modeling, I won’t go beneath 2’ radius. A couple of early Bachmann 40s have had the bogie swing restricted so they don’t knock the additional chassis detailing off, so they won’t get round R2 any more. It’s just something I’ve been pondering. It's the proverbial rock and a hard place for the manufacturers. The standard for most models these days seems to be R2, so I totally understand AS producing the Deltic to work with R2 as well. This whole modelling thing is full of compromises! I can't say I look at the AS Deltic and thing "damn those wheels are small". I don't perceive any issue at all with the wheel diameter. There was someone on RMweb recently asking about R1. Yikes. 2 6 Link to post Share on other sites More sharing options...
Porcy Mane Posted October 27, 2022 Share Posted October 27, 2022 6 minutes ago, RBAGE said: 9P30 Consett > Tyne Yard not doable. 9P72 Tees > Raisby tripper for 1969 looks a goer. Loads of Conflat L's and Berry Wiggins tanks. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now