Zomboid Posted March 29, 2019 Share Posted March 29, 2019 The wipers in a 45 (presumably other classes too, but I'm not familiar with anything else) also have a lever so that they can be operated by hand if the motor fails. Obviously no use if the wiper arm has disintegrated, and quite how you'd use it whilst also driving I couldn't say. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold rodent279 Posted March 29, 2019 RMweb Gold Share Posted March 29, 2019 6 hours ago, melmerby said: They used to stop completely when labouring up a hill (usually when it was pouring with rain!) I usually stop completely when labouring uphill, I know the feeling! 1 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted March 29, 2019 RMweb Gold Share Posted March 29, 2019 6 hours ago, Zomboid said: The wipers in a 45 (presumably other classes too, but I'm not familiar with anything else) also have a lever so that they can be operated by hand if the motor fails. Obviously no use if the wiper arm has disintegrated, and quite how you'd use it whilst also driving I couldn't say. IIRC many locos with the wipers operating from the bottom of the screen were like this. WR hydraulics and 47s had the motor at the top of the screen, and could not be reached from the driving seat anyway. A driver usually has a hand free, maybe two if the loco's deadman's is a pedal as opposed to a handle and even if not he has 7 seconds before the deadman's kicks in. 1 Link to post Share on other sites More sharing options...
AlfaZagato Posted March 29, 2019 Share Posted March 29, 2019 What did driver's do with those rotary wipers that some Western's had? Link to post Share on other sites More sharing options...
Gibbo675 Posted March 29, 2019 Share Posted March 29, 2019 15 hours ago, rodent279 said: I believe you! But I wouldn't know if you were kidding either! Didn't they also have steam operated firehole doors? I believe some cars had wipers operated off manifold vacuum. I'm told the wipers used to slow down on full throttle! Hi Rodent, They are nothing special, only a 3/8" copper pipe with a series of holes drilled into it that squirts hot water onto the window glass. The fire hole doors are great and when set up properly and should you use your heal to operate the treadle they are quite fun to use. If you pass over rough track it can put you off your rhythm and get the shovel trapped. Gibbo. 1 Link to post Share on other sites More sharing options...
Talltim Posted March 29, 2019 Share Posted March 29, 2019 On 11/02/2019 at 19:22, Corbs said: I wasn't sure where to put this as it's neither imaginary locos or fictitious liveries, but I thought the audience might appreciate it. Whilst flicking through 'locomotive panorama' this passage jumped out at me. Would make an interesting subject to model! So the choices were green, green, green or black.... 1 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted March 29, 2019 RMweb Gold Share Posted March 29, 2019 3 hours ago, AlfaZagato said: What did driver's do with those rotary wipers that some Western's had? I think that was only one loco, at one end. It was a ‘Kent’ rotating windscreen rather than a wiper (to split hairs), designed for ship’s bridge windscreens. It span at high speed, throwing water droplets off. I believe they were Perspex rather than glass. 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted March 29, 2019 RMweb Gold Share Posted March 29, 2019 1 hour ago, Talltim said: So the choices were green, green, green or black.... This exhibition of potential liveries was for the mixed traffic livery; two shades of blue were authorised for 8P locos and the general passenger livery had already been settled as GW lined. The ‘Western’ livery referred to here was presumably unlined. The story illustrates a clever piece of presentation by Riddles, who wanted LNWR lined black. When, as he’d predicted, the Great and Good couldn’t make up their collective mind, he summoned up another Black 5, from off stage, in full LNWR colours and with everything polished and burnished. The livery was thus chosen and lasted until 1968. My my personal choice would have been for Maunsell era Southern olive green with yellow lining; IMHO a very attractive scheme that would have sat well on any loco. 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted March 29, 2019 Share Posted March 29, 2019 Nope. It was for the passenger livery. Full details in the Big Four In Colour book by Jenkinson. That is why they had GWR liveried Black Fives present as well as SR Malachite Green and LNER Apple Green. It was to stop certain regions churning out new locomotives in pre 1948 liveries (mainly the SR and ER). At the time there wasn't going to be a mixed traffic livery. They were all going to be unlined black as the 1946 LMS style. Express passenger locomotives were going to be Caledonian Blue. But even that shade was debated as there was two shades of CR Blue. Jason Link to post Share on other sites More sharing options...
Steamport Southport Posted March 29, 2019 Share Posted March 29, 2019 I forgot to point out that this is what Riddles wanted. Express passenger locomotives in LNWR livery. He accepted the compromise of mixed traffic locomotives receiving it. https://www.ssplprints.com/image/92281/wethersett-e-r-sir-william-a-stanier-frs-steam-locomotiv Scroll down for 46201 in LNWR style livery. https://6201.co.uk/index.php/timeline-3/ Jason Link to post Share on other sites More sharing options...
RMweb Premium melmerby Posted March 29, 2019 RMweb Premium Share Posted March 29, 2019 The Westerm, of course, managed to get their own back later on when not only did many non express ex GWR locos end up in fully lined green livery, quite a few of Riddles machines were so treated as well! 1 Link to post Share on other sites More sharing options...
Talltim Posted March 29, 2019 Share Posted March 29, 2019 4 hours ago, The Johnster said: I think that was only one loco, at one end. It was a ‘Kent’ rotating windscreen rather than a wiper (to split hairs), designed for ship’s bridge windscreens. It span at high speed, throwing water droplets off. I believe they were Perspex rather than glass. One of the Woodhead electrics has those too, think one of the Co-Cos 1 Link to post Share on other sites More sharing options...
RMweb Gold rodent279 Posted March 29, 2019 RMweb Gold Share Posted March 29, 2019 9 hours ago, Gibbo675 said: Hi Rodent, They are nothing special, only a 3/8" copper pipe with a series of holes drilled into it that squirts hot water onto the window glass. The fire hole doors are great and when set up properly and should you use your heal to operate the treadle they are quite fun to use. If you pass over rough track it can put you off your rhythm and get the shovel trapped. Gibbo. Think I remember somewhere about how mischievous drivers would "accidentally" operate the treadle to close the doors just as the fireman swung his shovel into the firehole! 1 1 Link to post Share on other sites More sharing options...
rockershovel Posted March 30, 2019 Share Posted March 30, 2019 On 24/08/2010 at 12:55, 34theletterbetweenB&D said: Having thought about it a little more, it is actually closest to a Meyer arrangement: single fairly conventional boiler over two swivelling powered bogies. The geared drive is distinctively different, so Bulleid-Meyer. . The Leader always makes me think of the apocryphal description of the Vincent; a lot of ingeniously engineered solutions to problems no one else regarded as important. Whether it fits the other description, of sounding like two gas stoves being dragged across a cobbled yard, I couldn’t say. But Bulleid-Meyer seems appropriate; a Meyer, but without the supposed advantages of the type and a whole new set of problems uniquely its own. 2 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted March 30, 2019 RMweb Premium Share Posted March 30, 2019 10 hours ago, Talltim said: One of the Woodhead electrics has those too, think one of the Co-Cos That was 27002 but before that one of the NER Bo+Bos (No.8) was fitted with them. Link to post Share on other sites More sharing options...
Gibbo675 Posted March 30, 2019 Share Posted March 30, 2019 10 hours ago, rodent279 said: Think I remember somewhere about how mischievous drivers would "accidentally" operate the treadle to close the doors just as the fireman swung his shovel into the firehole! Hi Rodent, I don't quite know how such an action would be possible for when being correctly operated the treadle is under the right heal of the fireman and is situated at floor level. Gibbo. Link to post Share on other sites More sharing options...
rockershovel Posted March 30, 2019 Share Posted March 30, 2019 1 hour ago, Gibbo675 said: Hi Rodent, I don't quite know how such an action would be possible for when being correctly operated the treadle is under the right heal of the fireman and is situated at floor level. Gibbo. This appears to be a railway version of the old chestnut about removing bullets from a machine gun feed belt to tap out various rhythms. WW1 era machine guns rely on the exploding charge to cycle the breech, miss a bullet and it just stops. Pull the cocking lever to chamber the next round and you’re off again. 1 1 Link to post Share on other sites More sharing options...
Gibbo675 Posted March 30, 2019 Share Posted March 30, 2019 On 29/03/2019 at 14:32, Gibbo675 said: Hi Rodent, They are nothing special, only a 3/8" copper pipe with a series of holes drilled into it that squirts hot water onto the window glass. The fire hole doors are great and when set up properly and should you use your heal to operate the treadle they are quite fun to use. If you pass over rough track it can put you off your rhythm and get the shovel trapped. Gibbo. 7 hours ago, rockershovel said: This appears to be a railway version of the old chestnut about removing bullets from a machine gun feed belt to tap out various rhythms. WW1 era machine guns rely on the exploding charge to cycle the breech, miss a bullet and it just stops. Pull the cocking lever to chamber the next round and you’re off again. My dear Mr Shovel, How correct you indeed are, may I add both more information and the original comment for your perusal and juxtaposition of ones own machine gun myth. In reading my original comment you will note that I make mention of rough track. the reason is quite simple for when traversing rough track one may be put off balance and it is then that one may have to reposition ones feet to prevent falling to the cab floor. Should this occur when ones heal is upon the treadle and the shovel is inside the fire hole then it may become trapped as the doors clap shut. I do find that the greater part of the myths surrounding the Bulleid Pacifics to be mostly apocryphal nonsense. Gibbo. 2 Link to post Share on other sites More sharing options...
rockershovel Posted March 31, 2019 Share Posted March 31, 2019 On 30/03/2019 at 19:24, Gibbo675 said: My dear Mr Shovel, How correct you indeed are, may I add both more information and the original comment for your perusal and juxtaposition of ones own machine gun myth. In reading my original comment you will note that I make mention of rough track. the reason is quite simple for when traversing rough track one may be put off balance and it is then that one may have to reposition ones feet to prevent falling to the cab floor. Should this occur when ones heal is upon the treadle and the shovel is inside the fire hole then it may become trapped as the doors clap shut. I do find that the greater part of the myths surrounding the Bulleid Pacifics to be mostly apocryphal nonsense. Gibbo. We’re not quite on the same page here - I was trying to reply to the comment about the driver closing the door as the fireman was swinging his shovel, but that isn’t what appeared... Link to post Share on other sites More sharing options...
SteamedLyons Posted April 14, 2019 Share Posted April 14, 2019 I've been a lurker on this particular part of the form for years (literally!) but I think this is only my first post on RMweb as a whole. I have been quite nervous my stuff isn't up to snuff, but I feel like I should force myself to post something to tide everyone else like me over until the professional madmen return! It's thanks to this forum I've been happily playing around with various ideas of my own, and like many here before me, proposed designs, the stuff some people come up with is really inspirational! Thanks for fueling my addiction to the fantastical everyone! That soppy stuff said, let's get to the loco, shall we? ...The Riddles BR Standard 5MTT! This monster came about during a time of musing about the big, imposing Baltics of the early 20th century (especially those of the Lancashire and Yorkshire and Furness) and how they could be brought into line with more modern motive power. As the only ones I did at this larger scale I do feel happy with them, although it's pretty obvious given their basis - It's just a 5MT with a 4MTT smashed into it (somehow everything from the buffer heads to the cab magically disappeared!) and would be criminally overweight for what I would presume would be almost every line in the country, perhaps a 4MT 4-6-0 would've been a better starting point? I do think it's a pretty beast though. Hopefully, I've done this right and below you should see this beast in a strange collection of standard BR schemes and a few fictional ones: go big or go home as they say! 14 1 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted April 15, 2019 RMweb Gold Share Posted April 15, 2019 It’s definitely got a certain presence! Link to post Share on other sites More sharing options...
RLBH Posted April 15, 2019 Share Posted April 15, 2019 Oddly enough, a 5MT 4-6-4T is something I keep playing around with. It would definitely be an imposing (and capable) locomotive. I fear that weight would be its' downfall, though - Baltic tanks kept falling foul of it in Britain. It would, however, naturally lead to a 2-8-4T version with 60" drivers, which would be a seriously imposing machine for short-distance heavy freight work. I don't think there's much point in a 4-6-4T based on the Standard Class 4 4-6-0, because that's basicaly just a Class 4 2-6-4T with a four-wheeled bogie at either end. It might get you longer legs, I suppose, but that's about all. 1 2 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted April 15, 2019 Share Posted April 15, 2019 I'm Looing at it and wondering if the boiler could be a bit longer (looks potentially a touch short compared to fire box and smoke box size) and it then makes a very imposing 4-8-4 tank... 1 Link to post Share on other sites More sharing options...
AlfaZagato Posted April 15, 2019 Share Posted April 15, 2019 Would you stretch the boiler for loss of smokebox? I don't know if you could move that smokebox too far forward without adversely affecting ride. Link to post Share on other sites More sharing options...
RMweb Gold Corbs Posted April 15, 2019 RMweb Gold Share Posted April 15, 2019 (edited) Sort of like this? A bit bodgy but only for fun. I've not changed the 5MT dimensions, just stretched the 4MT tanks and bunker and moved the trailing wheels. Edited April 15, 2019 by Corbs 6 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now