MikeTrice Posted May 2, 2019 Share Posted May 2, 2019 Yes, 4mm. It is the Rails Dynamometer Car. The major benefit of this technique is the oil paint is not quick drying so you have plenty of time to get it looking right before it dries. 1 Link to post Share on other sites More sharing options...
toplink@()1989))(( Posted May 8, 2019 Author Share Posted May 8, 2019 On 04/05/2019 at 18:59, Doncaster said: Hi Pete, There's many methods of doing teak finishes and it's down to you to find the method that works for you. I tried all sorts of things I'd seen in the mags and wasn't happy with any of them. So I decided to try artists' colours. I found a mix of yellow ochre and golden ochre (60/40) acrylic made a great base coat, with a mix of raw and burnt sienna (75/25) on top after using a brown pencil to add some character. Both coats were grained with the brush. I then sealed and finished it with Ronseal quick drying teak varnish. I was happy with that but became dissatisfied with the thick paint. If you thin it you don't get the coverage. Oil paints are great but take too long to dry. I was pointed at Winsor and Newton Alkyd oil paint which gives a lovely thin coat which can be dragged with the brush. You can't get golden ochre but yellow ochre works fine. Each coat dries overnight. Attached pic of a 7mm carriage done using this method. My journey has taken years! Good luck Vernon Thanks for your tips Vernon. The effect you've achieved is just the job. As you rightly say, you only have to please your eye and it can take a while, so I will keep following the different methods and experiment with each until I find a method that suits me. Pete. Link to post Share on other sites More sharing options...
sir douglas Posted May 11, 2019 Share Posted May 11, 2019 very interesting thread, im soon going to be in the same position of needing to paint on some teak, im doing a Rother Valley brake van which the colonel stephens society website says it was teak Link to post Share on other sites More sharing options...
One32 Posted May 15, 2019 Share Posted May 15, 2019 On 04/05/2019 at 18:59, Doncaster said: Hi Pete, There's many methods of doing teak finishes and it's down to you to find the method that works for you. I tried all sorts of things I'd seen in the mags and wasn't happy with any of them. So I decided to try artists' colours. I found a mix of yellow ochre and golden ochre (60/40) acrylic made a great base coat, with a mix of raw and burnt sienna (75/25) on top after using a brown pencil to add some character. Both coats were grained with the brush. I then sealed and finished it with Ronseal quick drying teak varnish. I was happy with that but became dissatisfied with the thick paint. If you thin it you don't get the coverage. Oil paints are great but take too long to dry. I was pointed at Winsor and Newton Alkyd oil paint which gives a lovely thin coat which can be dragged with the brush. You can't get golden ochre but yellow ochre works fine. Each coat dries overnight. Attached pic of a 7mm carriage done using this method. My journey has taken years! Good luck Vernon Hi Vernon Do you now use Alkyd paints for all layers or are they grained on top of acrylic? Ralph Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now