Erixtar1992 Posted December 1, 2019 Share Posted December 1, 2019 2 minutes ago, Dungrange said: Not that long. I ordered several custom boards earlier in the year and although it took a couple of months to find a slot for production, I wasn't invoiced until they were effectively ready for shipping. I think I had them within a week of receiving and paying the invoice. excellent thankyou. I paid the end of last week so hopefully will be here shortly. itching to get going! Link to post Share on other sites More sharing options...
Dungrange Posted December 1, 2019 Share Posted December 1, 2019 Just looking back at my e-mails, I received and paid my invoice from Tim on the morning of Thursday 2nd May, and I have an earlier e-mail that stated he hoped my boards would be ready for collection by the courier company on Friday 3rd May and that delivery to me would therefore most likely be Tuesday 7th May or shortly thereafter. I can't actually remember whether my boards were delivered on the Tuesday or the Wednesday of that week, but ultimately the day that TNT chose to deliver the consignment was obviously outwith his control. All I can confirm is that they were received within a week of me paying, which is pretty good service. I'd therefore assume that you should receive your boards soon - probably on Monday. 1 Link to post Share on other sites More sharing options...
Erixtar1992 Posted December 1, 2019 Share Posted December 1, 2019 many thanks bud! lets hope so! 1 Link to post Share on other sites More sharing options...
Down_Under Posted December 1, 2019 Share Posted December 1, 2019 8 hours ago, Satan's Goldfish said: Just spoken with Tim as he's not on RMweb anymore and showed him your post; he asks if you could send him an email please. Thanks, I'll do just that. James 1 Link to post Share on other sites More sharing options...
RoyalClaud Posted December 4, 2019 Share Posted December 4, 2019 Hello Down_Under, I live in Queensland south of Brisbane and earlier this year I followed up the issue of importing plywood laser cut baseboards from Tim Horn into Oz from the U.K. with the Department of Agriculture and Water Resources and it is my understanding, following the links and advice given in their response, that both plywood and MDF are permitted to be imported into the country under the description of a “Wooden Product”. There is a responsibility for the Manufacturer and/or Supplier to provide details of the product and source materials and the importer to provide this information to the department for review and appropriate authorisation. Link to BICON (Biosecurity Import Conditions) database: https://bicon.agriculture.gov.au/BiconWeb4.0/ I haven’t approached Tim yet with this information due to website updates. His old website stated the only country he could not expert to is Australia. I don’t think that is now the correct, although some additional documentation may be necessary to be able to export to Oz. I would be interested to know how you get on if you are already in communication with Tim. Roger 1 1 Link to post Share on other sites More sharing options...
RMweb Gold beast66606 Posted December 4, 2019 RMweb Gold Share Posted December 4, 2019 Tim is hoping his new website will be available early in the New Year but there is a lot of work to do on it, as well as fulfilling orders and he's only a one man band so patience is needed. 3 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted December 4, 2019 RMweb Gold Share Posted December 4, 2019 9 minutes ago, beast66606 said: he's only a one man band so patience is needed. How very Shawplan-esque Dave, like that's gonna happen! Mike. 4 Link to post Share on other sites More sharing options...
Down_Under Posted December 4, 2019 Share Posted December 4, 2019 Thanks for the update guys. I'll shoot Tim an email. I'll check back in around the New Year. James 1 Link to post Share on other sites More sharing options...
RMweb Gold kipford Posted December 6, 2019 RMweb Gold Share Posted December 6, 2019 Tim has just delivered some custom Stock Boxes to me. Just over two weeks from me sending him the dxf's to arriving at my door, just got to find time to build them now. Great service. 2 Link to post Share on other sites More sharing options...
Guest Jack Benson Posted December 8, 2019 Share Posted December 8, 2019 Hi, Is Tim currently incommunicado, his website is in limbo but no other untoward indication? Just asking JB Link to post Share on other sites More sharing options...
RMweb Premium 30368 Posted December 8, 2019 RMweb Premium Share Posted December 8, 2019 Jack, PW Depot is looking good. All the best to you and yours for Christmas. Kind regards, Richard B 1 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted December 8, 2019 Share Posted December 8, 2019 31 minutes ago, Jack Benson said: Hi, Is Tim currently incommunicado, his website is in limbo but no other untoward indication? Just asking JB Send him an email if you need him. His old website was deactivated (not by choice) and he is in the process of making a new one but it will take time as he has to fit it in around existing orders and making money to eat. 1 Link to post Share on other sites More sharing options...
Guest Jack Benson Posted December 8, 2019 Share Posted December 8, 2019 52 minutes ago, Satan's Goldfish said: Send him an email if you need him. His old website was deactivated (not by choice) and he is in the process of making a new one but it will take time as he has to fit it in around existing orders and making money to eat. Hi, Tim just responded, the email address seems to have changed. Now, a happy bunny. JB Link to post Share on other sites More sharing options...
devonseasider Posted December 9, 2019 Share Posted December 9, 2019 13 hours ago, Jack Benson said: Tim just responded, the email address seems to have changed. Would you let the rest of us have the new one, please. I, for one, would like to contact him about some new boards. 1 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted December 9, 2019 Share Posted December 9, 2019 8 hours ago, devonseasider said: Would you let the rest of us have the new one, please. I, for one, would like to contact him about some new boards. He can still be reached on tim@timhorn.co.uk 2 Link to post Share on other sites More sharing options...
cbrailways Posted December 28, 2019 Share Posted December 28, 2019 (edited) I have also had excellent service from Tim (and about to do some more in the new year). My last order arrived promptly, and contained a hand written note thanking me for my business. Now, how many suppliers do that? Edited December 28, 2019 by cbrailways 2 Link to post Share on other sites More sharing options...
Lacathedrale Posted December 28, 2019 Share Posted December 28, 2019 Always had excellent service from Tim and found him to be communicative (within reason, as mentioned he's a one man band) and has always done me good turn. 2 Link to post Share on other sites More sharing options...
dpgibbons Posted December 28, 2019 Share Posted December 28, 2019 Quote I live in Queensland south of Brisbane and earlier this year I followed up the issue of importing plywood laser cut baseboards from Tim Horn into Oz from the U.K. In addition to import restrictions there's also the issue of the high shipping cost to Australia, although that might be offset by a VAT rebate if Tim is registered. I drew up my own baseboard design in Inkscape and had them laser cut locally, which worked out a bit cheaper than Tim's UK prices. 1 Link to post Share on other sites More sharing options...
RMweb Gold JohnR Posted July 6, 2020 RMweb Gold Share Posted July 6, 2020 Was just about to email Tim about some new boards, when I saw this message from about 6 weeks ago on his Facebook page: Quote We have had to take the difficult decision not to take on any more orders as of this week. We have plenty of wood, machines are working but the one thing I do not have is time. I’ve several outstanding bespoke orders to get through, plus orders for kits which I am going to concentrate on clearing our full order book, and our best estimate is that it will be 4 months before we can start accepting orders again. We will work on the new website as well. I have cleared all outstanding 'paid for' orders and will now only take payment on an order by order basis. We are very sorry about this, If you have any queries, please email or message me. Keep safe and keep well. Let’s hope Covid-19 is defeated soon. Looks like he's in the enviable position of having too much work! 3 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 6, 2020 RMweb Gold Share Posted July 6, 2020 2 hours ago, JohnR said: Was just about to email Tim about some new boards, when I saw this message from about 6 weeks ago on his Facebook page: Looks like he's in the enviable position of having too much work! He is being realistic about things though, so everybody knows where they stand. Mike. 5 Link to post Share on other sites More sharing options...
70E Posted April 15, 2021 Share Posted April 15, 2021 Hi, For the last year off so Tims website has been under construction 'new website coming soon'? Tried emailing , how do you get to order boards? 1 Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted April 15, 2021 RMweb Premium Share Posted April 15, 2021 3 hours ago, 70E said: Hi, For the last year off so Tims website has been under construction 'new website coming soon'? Tried emailing , how do you get to order boards? Try here https://www.facebook.com/timhornlasercutting/ 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted August 24, 2021 RMweb Premium Share Posted August 24, 2021 (edited) well, it's that time of year again where I contemplate building a train set... I note that the website is still under construction and Tim's Facebook page doesn't appear to have seen any action since July with regards stock listings, so I was wondering if anyone knows the current situation regarding ordering and getting in touch? I appreciate how busy the guy must be, so before hassling him on what might not be a definite order, I thought I'd hassle you lot instead. Cheers Dubya edit: Fired off an email to him for prices and availablity, using the timhornlasercut (at) gmail (dot) com address from his Faceache page. Edited August 24, 2021 by Tim Dubya 1 Link to post Share on other sites More sharing options...
RMweb Gold JohnR Posted August 24, 2021 RMweb Gold Share Posted August 24, 2021 Here is a link to his stock items https://onedrive.live.com/view.aspx?resid=AACC3B0A4E4EED2B!1841&ithint=file%2cdocx&authkey=!AI6rYEKpnE_ZOaY 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted August 24, 2021 RMweb Premium Share Posted August 24, 2021 (edited) 12 hours ago, JohnR said: Here is a link to his stock items https://onedrive.live.com/view.aspx?resid=AACC3B0A4E4EED2B!1841&ithint=file%2cdocx&authkey=!AI6rYEKpnE_ZOaY I'm pleased to say that I've had a response from Tim and ordered a nice set of boards for delivery in 5-6 weeks time. His current stock list is the same as the one kindly posted by @JohnR above. Better learn Templot Edited August 24, 2021 by Tim Dubya learned a bit more English 3 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now