bigherb Posted January 8, 2019 Share Posted January 8, 2019 Deep Bronze Green. Colour 224 in the old BS381c colour chart. But it did change to a lighter green, which I don't know the spec. of, later on. BS381C 276 Lincoln green Link to post Share on other sites More sharing options...
PenrithBeacon Posted January 8, 2019 Share Posted January 8, 2019 He does have form for asking others to supply information he hasn't bothered to read/look at. Actually, I spend a good deal of my time at the TNA researching and when a matter that I have researched comes up on these threads I freely pass on the information I have. One of the constraints of life is that it's impossible to research everything on a topic as vast as the railways of Britain no matter who much time you spend in the TNA or the NRM. Also, one of the great virtues of subscribing to a forum like RMweb is that it puts you in touch with like minded people who are willing to share what they know. However, there is a downside, and this current conversation is, regrettably, one of them. Link to post Share on other sites More sharing options...
Steamport Southport Posted January 8, 2019 Share Posted January 8, 2019 Was the Queen Anne Longmorn Distillery livery a preservation era one? I have looked and found photographs at Strathspey in that livery. https://www.flickr.com/photos/killie65/39768304811 But the ones I've found at the distillery taken in 1977 aren't. https://canmore.org.uk/site/16426/longmorn-distillery Jason 1 1 Link to post Share on other sites More sharing options...
PenrithBeacon Posted January 8, 2019 Share Posted January 8, 2019 BS381C 276 Lincoln greenThanks a lot. 1 Link to post Share on other sites More sharing options...
bennyboy Posted January 8, 2019 Share Posted January 8, 2019 It wasn't until I was searching for pictures of these little things that I realised that some of them were still in commercial use well into the late 80s/early 90s, so almost anyone can justify buying one. This picture is from 1989 although this one was still in use in the mid 90s! Ruston Hornsby 48DS at Blackett Hutton & Co. Guisborough by Idle Drifter, on Flickr This is from 1986. EBR10-026 by Jamerail, on Flickr Type 48DS (RH 417889/1958) at Dollands Moor Yard when under construction. 1989. by Adrian Nicholls, on Flickr 13 Link to post Share on other sites More sharing options...
RMweb Premium Dava Posted January 8, 2019 RMweb Premium Share Posted January 8, 2019 Was the Queen Anne Longmorn Distillery livery a preservation era one? I have looked and found photographs at Strathspey in that livery. https://www.flickr.com/photos/killie65/39768304811 But the ones I've found at the distillery taken in 1977 aren't. https://canmore.org.uk/site/16426/longmorn-distillery Jason Yes the 'Queen Anne' branding is post-preservation and the story of its restoration is here. The Longhorn distillery system would make an interesting model. http://whiskyshunters.blogspot.com/ Dava 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted January 8, 2019 Share Posted January 8, 2019 Yes the 'Queen Anne' branding is post-preservation and the story of its restoration is here. The Longhorn distillery system would make an interesting model. http://whiskyshunters.blogspot.com/ Dava I'll probably buy one just for fun. I don't need one, but that livery is different. Jason 1 Link to post Share on other sites More sharing options...
scots region Posted January 8, 2019 Share Posted January 8, 2019 It wasn't until I was searching for pictures of these little things that I realised that some of them were still in commercial use well into the late 80s/early 90s, so almost anyone can justify buying one. This picture is from 1989 although this one was still in use in the mid 90s! Ruston Hornsby 48DS at Blackett Hutton & Co. Guisborough by Idle Drifter, on Flickr This is from 1986. I wonder what the story behind the horseshoe was. 3 Link to post Share on other sites More sharing options...
Steamport Southport Posted January 8, 2019 Share Posted January 8, 2019 I wonder what the story behind the horseshoe was. Probably hit a horse. Seriously though, I believe that some people think it's good luck. Often hanged on shed doors. I don't believe in such things, touch wood. Jason 1 Link to post Share on other sites More sharing options...
Guest teacupteacup Posted January 8, 2019 Share Posted January 8, 2019 I'll definitely be picking on of these up, cracking wee machine! Hoping it will run well just on its own, confident it will though. I have live frog-points and can get my Hornby Sentinel to crawl through them no problem I'll repaint it into my chosen 'industrial green' Link to post Share on other sites More sharing options...
Porcy Mane Posted January 8, 2019 Share Posted January 8, 2019 I'll repaint it into my chosen 'industrial green' Two tone green with hint of rust. Splendid. 1 Link to post Share on other sites More sharing options...
26power Posted January 8, 2019 Share Posted January 8, 2019 Thanks for the link. Looks like some interesting reading, but that would seem easier on the pc - text a bit wee on the IPad! Yes the 'Queen Anne' branding is post-preservation and the story of its restoration is here. The Longhorn distillery system would make an interesting model.http://whiskyshunters.blogspot.com/ Dava Link to post Share on other sites More sharing options...
SRman Posted January 9, 2019 Share Posted January 9, 2019 Answering my own question from before, it looks like these and the Peckett 0-6-0STs will have 6-pin sockets for DCC. That's according to the listings on Hatton's website. Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted January 9, 2019 Share Posted January 9, 2019 Isn't it good to have the prototype manufacturer's poop sheet for a loco (P2 of this thread)? I hope all potential purchasers have noted the maximum speed of 9mph! So that's an hour off the marathon record, and no clue to how long it would take to graft up to that exhilarating rate of progress, but I am prepared to believe most of a minute light engine on level track... That'll be CV3 set to at least 60 then. 1 Link to post Share on other sites More sharing options...
SovietSalad Posted January 9, 2019 Share Posted January 9, 2019 Didn't foresee... Don't need.... Must have! A prototype question, if I may. What sort of haulage capacity would a real one have? I'm not expecting (or wanting too much), but with several private siding ideas churning around my mind at the moment I don't want to do something with too much traffic for such a small shunter. I can use my Sentinels for "busy" layouts, this needs, not a restful life, but less intensive plan. Or am I wrong? I've towed a class 416 2-EPB down a slight incline with a 48DS before, and up a slight incline with 7 standard BR wagons, they're surprisingly strong. Running light they take off rather quickly! Link to post Share on other sites More sharing options...
Mark Dickerson Posted January 9, 2019 Share Posted January 9, 2019 I've towed a class 416 2-EPB down a slight incline with a 48DS before, and up a slight incline with 7 standard BR wagons, they're surprisingly strong. Running light they take off rather quickly! Does anyone have any experience of their (sane) maximum speed LE? (Although ultimately with the model I'm more bothered about seeing an answer to the question: Can It Shunt?) 2 Link to post Share on other sites More sharing options...
RMweb Gold Captain Kernow Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 It wasn't until I was searching for pictures of these little things that I realised that some of them were still in commercial use well into the late 80s/early 90s, so almost anyone can justify buying one. This picture is from 1989 although this one was still in use in the mid 90s! Ruston Hornsby 48DS at Blackett Hutton & Co. Guisborough by Idle Drifter, on Flickr This is from 1986. EBR10-026 by Jamerail, on Flickr Type 48DS (RH 417889/1958) at Dollands Moor Yard when under construction. 1989. by Adrian Nicholls, on Flickr Thanks for those photos. What superb reference material when it comes to weathering the locos! Does anyone have any experience of their (sane) maximum speed LE? (Although ultimately with the model I'm more bothered about seeing an answer to the question: Can It Shunt?) Yes, the mechanism will have to be silky smooth and capable of sustained slow running (eg. 'walking pace'). Link to post Share on other sites More sharing options...
MarkSG Posted January 9, 2019 Share Posted January 9, 2019 I wonder what the story behind the horseshoe was. At that stage in its life, luck was probably the main thing keeping it going every day! 2 Link to post Share on other sites More sharing options...
Wickham Green Posted January 9, 2019 Share Posted January 9, 2019 I wonder what the story behind the horseshoe was. looks like a radiator behind the horseshoe ................... Link to post Share on other sites More sharing options...
RMweb Gold russ p Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 When I lived up north a neighbor used to maintain the Guisborough 48DS he always used to say pop down to see it but unfortunately never did. I did see it a few times but no proper visit What was remarkable was the site it was on had not been rail connected since 1964 Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 There were two more 48DS that certainly worked into the late 1990s and may even have made it into the present century. They were used by contractors Grant Lyon Eagre and I photographed them in their plant yard, at Scunthorpe, in 1995. I saw one of them on a track laying contract at Bescot in something like 1999 or may have been 2000. I'm not exactly sure now. Scroll down this post for a photo and for one of Trackwork Ltd. 48DS ,which has already been shown here in an earlier paint job. http://www.rmweb.co.uk/community/index.php?/topic/28530-industrial-locomotives-in-the-late-80s-to-mid-90s/&do=findComment&comment=303217 2 Link to post Share on other sites More sharing options...
Porcy Mane Posted January 9, 2019 Share Posted January 9, 2019 (edited) There were two more 48DS that certainly worked into the late 1990s and may even have made it into the present century. So when is the sound chip coming out? Bl**dy HeII, I didn't realise it's out now. To the engineering bench P Edited January 9, 2019 by Porcy Mane 1 Link to post Share on other sites More sharing options...
RMweb Gold Hroth Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 Looking at the manufacturers info sheet, its nice to see that R&H actually gave it an "R" number (R9618) but Hornby didn't use it! Also, it may have had a fully glazed cab, but no windscreen wipers and cab heating was an optional extra... 1 Link to post Share on other sites More sharing options...
RMweb Gold Ruston Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 So when is the sound chip coming out? P Digitrains already do sound for the 48DS. I went with Paul Chetter to record a loco , last year - http://www.rmweb.co.uk/community/index.php?/topic/112221-the-ruston-48ds-class-a-rivet-counters-guide/page-3&do=findComment&comment=2733965 2 Link to post Share on other sites More sharing options...
Porcy Mane Posted January 9, 2019 Share Posted January 9, 2019 Digitrains already do sound for the 48DS. I went with Paul Chetter to record a loco , last year - http://www.rmweb.co.uk/community/index.php?/topic/112221-the-ruston-48ds-class-a-rivet-counters-guide/page-3&do=findComment&comment=2733965 Me thinks we are cross posting with each other. Tiny gearboxes, belt drives & Nickel Silver sheet here I come. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now