JSpencer Posted December 17, 2018 Share Posted December 17, 2018 Will be interesting comparing the Rails/Biffo sound to the accurascale/ESU sound. Legomanbiffo is going to be hard to match let alone beat, but if someone has a hope, it is probably the guys at Accurascale. Link to post Share on other sites More sharing options...
Les1952 Posted December 20, 2018 Share Posted December 20, 2018 I seem to remember being told in no uncertain terms by Legomanbiffo himself (at a show) that a Deltic had far too much bass for a model smaller than O-gauge to render faithfully? What has changed technically since then? Or does the sound file run two stereo channels slightly out of sync to the two speakers? Les Link to post Share on other sites More sharing options...
Accurascale staff Accurascale Fran Posted December 20, 2018 Accurascale staff Share Posted December 20, 2018 I seem to remember being told in no uncertain terms by Legomanbiffo himself (at a show) that a Deltic had far too much bass for a model smaller than O-gauge to render faithfully? What has changed technically since then? Or does the sound file run two stereo channels slightly out of sync to the two speakers? Les Hi Les, ESU are confident that they can do the Deltic justice in 4mm with the best sound rendition to date and design input for the chassis for the loco from the beginning, helping create what is the best possible Deltic sound in 4mm. Between that and the spec we are using for speakers etc it will be excellent. Will it rattle the fillings in your teeth? No. but no 4mm sound project can do that! It will be loud and sound like a Deltic, that much we can guarantee. Cheers, Fran 5 Link to post Share on other sites More sharing options...
JSpencer Posted December 20, 2018 Share Posted December 20, 2018 I can see the future complaints right now: "Dear Accurascale, My neighbour came knocking on my door at 3am in the morning! 3am in the morning, can you imagine that? Fortunately I was still up playing the sounds from the Deltic model, however my wife was most displeased both by loosing sleep from the model since several weeks and finally our neighbour waking her up so early in the morning. I am sad to say that I am forced to return the model for a full refund. It was either that or pay lawyer fees for a divorce. The funds will be used to buy a soothing jewelry which will make less noise. I would have brought that directly from yourselves, heals your website has none. May I recommend you include a jewelry section? Or fit AI so the model instantly cuts sound past midnight. Yours sincerely, A beaten customer" 4 Link to post Share on other sites More sharing options...
dogbox321 Posted December 22, 2018 Share Posted December 22, 2018 I can see the future complaints right now: "Dear Accurascale, My neighbour came knocking on my door at 3am in the morning! 3am in the morning, can you imagine that? Fortunately I was still up playing the sounds from the Deltic model, however my wife was most displeased both by loosing sleep from the model since several weeks and finally our neighbour waking her up so early in the morning. I am sad to say that I am forced to return the model for a full refund. It was either that or pay lawyer fees for a divorce. The funds will be used to buy a soothing jewelry which will make less noise. I would have brought that directly from yourselves, heals your website has none. May I recommend you include a jewelry section? Or fit AI so the model instantly cuts sound past midnight. Yours sincerely, A beaten customer" No, it just needs to be so loud that it drowns out the "nagging wife", so we don't have to miss the noise by going into "selective hearing mode". Simples! P.S. Its only going to get worse!!!! A deltic is a good toe dipping exercise, wait till they announce a 37! In the good old days on holiday, were still able to hear a St.Blazey 37 throbbing away in the distance on a clear night and wind in the right direction a few mins after leaving Exeter St.Davids, when the St. Blazey man opened em up wanting to get home! Progress..... Link to post Share on other sites More sharing options...
Steve O. Posted December 23, 2018 Share Posted December 23, 2018 Well, there’s a Christmas present to myself... Durham Light Infantry. Merry Christmas to all! Cheers, Steve. 1 Link to post Share on other sites More sharing options...
Oliver Rails Posted January 24, 2019 Author Share Posted January 24, 2019 Further to our recent announcement. We can now offer our six exclusive Accurascale newly tooled deltic locomotives with factory fitted DCC sound!! See all versions here The locomotives will be factory fitted with DCC sound by Accurascale and feature the same sounds and specification as Accurascales own versions. The locomotives feature the latest ESU Loksound 5 chip with two quality speakers with large sound capsules for the best possible sound. The sound versions are now online and available to pre-order. Priced at £250.00, pre-order now for only £30.00 deposit. Any customers who have pre-ordered the DCC Ready version and wish to UPGRADE to a DCC Sound version please contact our Mail Order Department on HERE or email info@railsofsheffield.com 3 1 Link to post Share on other sites More sharing options...
classy52 Posted January 24, 2019 Share Posted January 24, 2019 Great announcement from Rails, was looking forward to that 2 Link to post Share on other sites More sharing options...
Frond Posted January 24, 2019 Share Posted January 24, 2019 Good news that there is to be a common sound system, makes picking which one to go for a lot less stressful! 2 Link to post Share on other sites More sharing options...
classy52 Posted March 4, 2019 Share Posted March 4, 2019 Just pre-ordered 'Alycidon' Class 55 D9009 Deltic in BR Blue with pre-TOPS number (for mainline running) - DCC SOUND...can't wait for this one especially with sound. 1 Link to post Share on other sites More sharing options...
BritishRail60062 Posted July 21, 2019 Share Posted July 21, 2019 I quite like the Tulyar model and I am liking the detail on the unpainted sample. So well done to both Accurascale and Rails for bringing this one on and others to come as well such as the two Class 92's but I will talk about those on another topic. I have NEVER owned a Deltic model before and I don't know the real ones too well as I don't remember seeing them hence being about 2 years old when the HST's replaced them. But I like the BR blue so I might treat myself to a TULYAR model of it . 1 1 Link to post Share on other sites More sharing options...
atom3624 Posted July 21, 2019 Share Posted July 21, 2019 Deltic was the most impressive UK diesel I've ever seen live .... !! Must admit, it was just starting to pull out of Lime Street on the Trans Pennine, so twin plumes were blasting out of the exhausts and virtually reaching the roof!! Sound was impressive as well, and the power was obvious. I think it was when the HST moved onto the ECML. Al. 3 Link to post Share on other sites More sharing options...
Oliver Rails Posted February 15, 2021 Author Share Posted February 15, 2021 We are pleased to share images of the exclusive Rails of Sheffield / National Railway Railway / Deltic Preservation Society OO Gauge Accurascale Deltic Livery Samples! Available to Pre-order both DCC ready and DCC sound fitted, with just a £30 deposit. More images are available on our website and our partners sites. View more HERE Please note: The purpose of livery samples is to analyse models and identify any issues and amendments. These will be addressed on final production models. Buffers will be included on final production models. 16 Link to post Share on other sites More sharing options...
RMweb Premium reddragon Posted July 19, 2021 RMweb Premium Share Posted July 19, 2021 They were supposed to be with us in Q2 2021. Anyone know where they are as no updates from Rails or Accurascale. Link to post Share on other sites More sharing options...
AForce Posted July 19, 2021 Share Posted July 19, 2021 (edited) 9 minutes ago, reddragon said: They were supposed to be with us in Q2 2021. Anyone know where they are as no updates from Rails or Accurascale. The last I heard from Accurascale was that the Deltics are in production and are on course for delivery Q3, shipping conditions allowing. See post from Fran on the 17th June here: Edited July 19, 2021 by AForce 1 Link to post Share on other sites More sharing options...
RMweb Premium reddragon Posted July 19, 2021 RMweb Premium Share Posted July 19, 2021 8 minutes ago, AForce said: The last I heard from Accurascale was that the Deltics are in production and are on course for delivery Q3, shipping conditions allowing. See post from Fran on the 17th June here: Missed that one! Rails & Accurascale websites still say Q2 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted June 21, 2022 RMweb Premium Share Posted June 21, 2022 Is this the tread to enquire when or if dispatch of the exclusive Deltics is commencing?? Link to post Share on other sites More sharing options...
Gopher Posted June 22, 2022 Share Posted June 22, 2022 15 hours ago, ERIC ALLTORQUE said: Is this the tread to enquire when or if dispatch of the exclusive Deltics is commencing?? I just contacted Rails - and was told "There has been a slight delay with transport, we are hoping any day now they will be with us and dispatch will commence asap. Sorry for the delay" Sounds like they have not yet received their allocation. 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted June 24, 2022 RMweb Premium Share Posted June 24, 2022 Accurascale have said early next week they will ship to Rails. Link to post Share on other sites More sharing options...
RMweb Premium paulj Posted June 25, 2022 RMweb Premium Share Posted June 25, 2022 Had an email from Rails today confirming my order has been dispatched. 1 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted June 25, 2022 RMweb Premium Share Posted June 25, 2022 4 hours ago, paulj said: Had an email from Rails today confirming my order has been dispatched. 1 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted June 25, 2022 RMweb Premium Share Posted June 25, 2022 From the Facebook page. 1 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted June 25, 2022 RMweb Gold Share Posted June 25, 2022 Aw, cute little baby BRUTEs ;) Is it me or do the wheels look a bit splayed - like there is a rather heavy load on them :D Link to post Share on other sites More sharing options...
RMweb Gold Matt C Posted June 29, 2022 RMweb Gold Share Posted June 29, 2022 On 25/06/2022 at 18:22, Hilux5972 said: From the Facebook page. Note the complete lack of staff ? One tried to move a trolley, off with back strain, everyone else went on strike ! 🤣 Link to post Share on other sites More sharing options...
66738 Posted June 29, 2022 Share Posted June 29, 2022 Tulyar safety arrived. It’s been long in the making but boy was it worth the wait. What a model! Absolutely a work of art. 66738 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now