RMweb Premium boxbrownie Posted July 2, 2022 RMweb Premium Share Posted July 2, 2022 4 hours ago, Ray M said: Ho dear. My 2 little fellas arrived the other day and look like they have been in a right scrap. 2 broken arms & a broken leg. But at least the Deltic was 100% Same here, I ordered six packs and unfortunately they all came in one small Jiffy bag, only two pairs of figures are complete, the rest are missing arms or hands, the hands are especially vulnerable being so fine, but I feel they could have been packed a lot better, the bag just got squished in transit I guess. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted July 2, 2022 RMweb Premium Share Posted July 2, 2022 (edited) I know I just posted three (or was it four or five🤔) “moany” posts, but I still love and want my Deltic back, IMO the very best modern image Loco released so far. Edited July 2, 2022 by boxbrownie 1 2 Link to post Share on other sites More sharing options...
Haverail Posted July 2, 2022 Share Posted July 2, 2022 (edited) 28 minutes ago, 55020 said: With regard to the Powerpack (Stay Alive) issues some have mentioned. I wonder if there are a number of models out there that do not have the Powerpack configured in the decoder correctly. The V5 manual states the following: When I look at my two sound equipped Deltics (55001 and 55018) using the LokProgrammer, they both show AUX9 as 'disabled' and CV 339 as 0. Can someone who has a correctly functioning Powerpack report back with the value of CV 339 (with CV31=16, CV32=0)? Perhaps Fran or one of the other members of the AC team can confirm if I have understood the configuration requirements correctly. If I can find time later I will change the settings to see if it makes a difference. Steve The mention of CV31 and CV32 rang a bell! Just checked the changes required to get F5 to work as on the AS website. There it says that CV31 is to be 1 and CV32 is to be 1. It looks like there could be a clash here perhaps? I do not fully understand the dark artistry of CV programming but perhaps someone more expert can enlighten? Edited July 2, 2022 by Haverail Link to post Share on other sites More sharing options...
Hound Dog Posted July 2, 2022 Share Posted July 2, 2022 (edited) 27 minutes ago, boxbrownie said: Mines gone back to AS for fettling or something now, out of interest just how difficult was it to get to the coupling, was it a complete body off, bogie off etc ? In order to investigate and eliminate the cause of my derailments I stripped off the buffer beam, fuel tanks, body and finally the entire coupling mechanism so that there was nothing out with the basic chassis that could foul the bogie…….. in this condition it ran beautifully. Reintroduced the coupling mechanism at one end only and the snagging reoccurred. Getting access to the coupling is easy if you first remove the buffer beam - no real need to remove the body…….. my previous comments about how you remove and reinstall the coupling ( ie slide in and out onto a firm flat surface) are critical to not dislodging and potentially losing the spring to the carpet monster. Edited July 2, 2022 by Hound Dog 1 1 4 Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted July 2, 2022 RMweb Premium Share Posted July 2, 2022 5 minutes ago, Hound Dog said: In order to investigate and eliminate the cause of my derailments I stripped off the buffer beam, fuel tanks, body and finally the entire coupling mechanism so that there was nothing out with the basic chassis that could foul the bogie…….. in this condition it ran beautifully. Reintroduced the coupling mechanism at one end only and the snagging reoccurred. Getting access to the coupling is easy if you first remove the buffer beam - no real need to remove the body…….. my previous comments about how you remove and reinstall the coupling ( ie slide in and out onto a firm flat surface) are critical to not dislodging and potentially losing the spring to the carpet monster. Thank you, AS did offer a new kinematic coupling mechanism but TBH with my dexterity issues I didn’t feel confident on such a detailed Loco to mend one thing without completely b0ll0cking up something else 😂 3 Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted July 2, 2022 RMweb Gold Share Posted July 2, 2022 47 minutes ago, Haverail said: The mention of CV31 and CV32 rang a bell! Just checked the changes required to get F5 to work as on the AS website. There it says that CV31 is to be 1 and CV32 is to be 1. It looks like there could be a clash here perhaps? I do not fully understand the dark artistry of CV programming but perhaps someone more expert can enlighten? As I understand it, CVs 31 and 32 are used to index CV groups and have to be used before programming the related CVs. Roy 1 1 Link to post Share on other sites More sharing options...
40002 Posted July 2, 2022 Share Posted July 2, 2022 So now taken delivery of my 3 and a couple of days to have a good look at them, 11 and 15 were fine 002 had some issues which Accurascale have said they will sort. I wish I had got sound sound models now as I am very reluctant to remove the fragile body, I already have a SWD Loksound 5 decoder for one of them, which I tried yesterday at least you can fit decoder without removing the body, It doesn't seem to operate the lights entirely correctly but its only the tail lights which I'm not too bothered about, the sound through the built in Sugar Cube speakers on the DCC ready model seems to be frankly rubbish and I am now thinking if I can get a better speaker in the roof recess without having to remove the body. As far as the body goes I think the chains to the bogie would have been better left off and possibly making them an optional customer fit in the detailing pack, the ladders at the nose end look extremely easy to break, again I think they would be better left off or making them a customer fit in the detailing pack. 1 Link to post Share on other sites More sharing options...
Haverail Posted July 2, 2022 Share Posted July 2, 2022 22 minutes ago, Roy Langridge said: As I understand it, CVs 31 and 32 are used to index CV groups and have to be used before programming the related CVs. Roy Thanks, I tried the changes and yes the Stay Alive now works Hurrah. Unfortunately the forward direction headlights now stay on permanantly (previously these lights did not work at all). If I go into reverse I have headlights at both ends and if I turn on the tail lights they are on at the forward end as well as the headlights! Link to post Share on other sites More sharing options...
gazwire Posted July 2, 2022 Share Posted July 2, 2022 1 hour ago, boxbrownie said: Same here, I ordered six packs and unfortunately they all came in one small Jiffy bag, only two pairs of figures are complete, the rest are missing arms or hands, the hands are especially vulnerable being so fine, but I feel they could have been packed a lot better, the bag just got squished in transit I guess. Perhaps those figures could be used to fill up your model railway's disability quota. Equal opportunities for all, including small model people. 3 Link to post Share on other sites More sharing options...
60800 Posted July 2, 2022 Share Posted July 2, 2022 There is now only one Deltic left - and only one of it at that; D9020 Nimbus. Cheers, 60800 Link to post Share on other sites More sharing options...
60800 Posted July 2, 2022 Share Posted July 2, 2022 3 hours ago, ac1874 said: Where do I find this post? I fancy a good laugh! I wish I could remember - if I can find it again I'll say which group it was. Cheers, 60800 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post uk_pm Posted July 2, 2022 RMweb Gold Popular Post Share Posted July 2, 2022 (edited) 55 011 - looking work stained after a fortnight's hard work on the ECML - suffers a signal check at Doncaster as she heads south with an express from Aberdeen. Edited July 2, 2022 by uk_pm 19 2 Link to post Share on other sites More sharing options...
murphaph Posted July 2, 2022 Share Posted July 2, 2022 5 minutes ago, 60800 said: There is now only one Deltic left - and only one of it at that; D9020 Nimbus. Cheers, 60800 Then let the eBay extortion begin.... https://www.ebay.co.uk/itm/325251431302 Link to post Share on other sites More sharing options...
philg Posted July 2, 2022 Share Posted July 2, 2022 1 minute ago, murphaph said: Then let the eBay extortion begin.... https://www.ebay.co.uk/itm/325251431302 It’s only extortion if somebody makes you pay it. If people are happy to pay over the odds, then that’s the true value and the rest of us got a bargain. Maybe useful to share with domestic authorities? 8 6 Link to post Share on other sites More sharing options...
60800 Posted July 2, 2022 Share Posted July 2, 2022 1 minute ago, murphaph said: Then let the eBay extortion begin.... https://www.ebay.co.uk/itm/325251431302 I was honestly expecting a sound fitted Gordon to appear on eBay first. On a lighter note, Tulyar has just arrived from the DPS; Perfect right out of the box, and suitably posed with RSG; This just leaves KOYLI and Alycidon to pick up on Monday which are waiting for me at work. Cheers, 60800 10 1 Link to post Share on other sites More sharing options...
RMweb Gold Markwj Posted July 2, 2022 RMweb Gold Share Posted July 2, 2022 2 hours ago, Edna Clouds said: I have always thought that the 'wives stories' were made up in order to have a non-woke chuckle, that's why I introduced the idea of 'Matron' in a nursing home for those of us already there some pages ago. Also 'gone along' is my greatly missed partner who once informed me of her disinterest in my "sodding trains". Hey-ho! Although not in a nursing home my wife is a real 'matron' in the qualified nurse sense! Will let you know if matron nagging mode is worse than wife nagging mode! 5 Link to post Share on other sites More sharing options...
Administrators AY Mod Posted July 2, 2022 Administrators Share Posted July 2, 2022 6 minutes ago, Markwj said: Will let you know if matron nagging mode is worse than wife nagging mode! I would imagine the former is with a greater selection of tools of discomfort at her disposal. Probably doesn't remember the incident for as long though. 6 Link to post Share on other sites More sharing options...
DIRTY DIESEL Posted July 2, 2022 Share Posted July 2, 2022 57 minutes ago, Haverail said: Thanks, I tried the changes and yes the Stay Alive now works Hurrah. Unfortunately the forward direction headlights now stay on permanantly (previously these lights did not work at all). If I go into reverse I have headlights at both ends and if I turn on the tail lights they are on at the forward end as well as the headlights! Was the chip a factory fitted AS one or one of your own that the lights didn't work? Link to post Share on other sites More sharing options...
philg Posted July 2, 2022 Share Posted July 2, 2022 1 minute ago, DIRTY DIESEL said: Was the chip a factory fitted AS one or one of your own that the lights didn't work? I’m still waiting for my two, so can’t experiment, but I have been devouring the documentation as it becomes available But Have AccuraScale documented anywhere WHICH lights are wired to WHICH function outputs? That’s basic knowledge that is needed before anyone tries to remap lights to other function buttons Hopefully I’ve just missed it somewhere…..?? Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted July 2, 2022 RMweb Premium Share Posted July 2, 2022 1 hour ago, Haverail said: Thanks, I tried the changes and yes the Stay Alive now works Hurrah. Unfortunately the forward direction headlights now stay on permanantly (previously these lights did not work at all). If I go into reverse I have headlights at both ends and if I turn on the tail lights they are on at the forward end as well as the headlights! Sounds very Christmassey with all the lights on,soon be here....... 1 Link to post Share on other sites More sharing options...
mvwilson Posted July 2, 2022 Share Posted July 2, 2022 On 01/07/2022 at 20:10, Ryan91 said: @Accurascale Fran Is there any news on when the overseas orders will start dispatching? I chatted to five friends today who have overseas orders in. None of them have had any notification of despatch yet. 2 Link to post Share on other sites More sharing options...
North Devonian Posted July 2, 2022 Share Posted July 2, 2022 36 minutes ago, 60800 said: On a lighter note, Tulyar has just arrived from the DPS; Did DPS let you know it had been dispatched. Link to post Share on other sites More sharing options...
60800 Posted July 2, 2022 Share Posted July 2, 2022 4 minutes ago, North Devonian said: Did DPS let you know it had been dispatched. Yes I received an email with the royal mail item number (just signed for, not tracked sadly) Cheers, 60800 1 1 Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted July 2, 2022 RMweb Premium Share Posted July 2, 2022 1 hour ago, gazwire said: Perhaps those figures could be used to fill up your model railway's disability quota. Equal opportunities for all, including small model people. That’s already taken care of as all the crew figures I have have to have leg amputations regardless, every Loco cab has less legroom than the rear of a Fiat Cinquecento 🤣 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 2, 2022 RMweb Gold Share Posted July 2, 2022 37 minutes ago, mvwilson said: I chatted to five friends today who have overseas orders in. None of them have had any notification of despatch yet. , and? Mike. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now