Bob83a Posted September 5, 2019 Share Posted September 5, 2019 Now showing as in stock 2 Link to post Share on other sites More sharing options...
westie7 Posted September 6, 2019 Share Posted September 6, 2019 Just received an email telling me they've been posted 1 Link to post Share on other sites More sharing options...
rus578 Posted September 6, 2019 Share Posted September 6, 2019 Mine arrived at 8 am this morning looking forward to running them on the 15:30 speedlink service lol. Link to post Share on other sites More sharing options...
RMweb Gold Godfrey Glyn Posted September 7, 2019 RMweb Gold Share Posted September 7, 2019 My two have just been delivered by the postie and I am mightily impressed. Well done Chris and his team! Photos taken on my iPhone which tends to distort some of the colours. They also never ran past Chard but that is covered by Rule 1. all the best Godfrey 6 Link to post Share on other sites More sharing options...
RMweb Premium Temeraire Posted September 7, 2019 RMweb Premium Share Posted September 7, 2019 My pack of four just been delivered. very impressed just just need a heavy weathering! 1 1 Link to post Share on other sites More sharing options...
RMweb Gold tetsudofan Posted September 7, 2019 RMweb Gold Share Posted September 7, 2019 Postie just delivered mine, most impressed. Fantastic amount of detail. Now to see which coupling fits best, Roco close couplings, Hornby Roco close couplings or a combination of both couplings. Keith Link to post Share on other sites More sharing options...
westie7 Posted September 7, 2019 Share Posted September 7, 2019 unreal level of detail on these! And spare buffers in with the couplings and pipes 2 1 Link to post Share on other sites More sharing options...
bubbles2 Posted September 7, 2019 Share Posted September 7, 2019 My two arrived this morning although I ordered the early livery with the gray underframe and that is what I got, on the box end flap it says PRA China Clay Wagon - Late RLS605 PRA China Clay Wagon - Late RLS609 so had a moment when I thought I had ordered the wrong ones. 1 Link to post Share on other sites More sharing options...
RMweb Premium stephennicholson Posted September 7, 2019 RMweb Premium Share Posted September 7, 2019 2 hours ago, bubbles2 said: so had a moment when I thought I had ordered the wrong ones. Same here! Extremely pleased with the two i bought. Next is weathering. Well done, once again, to Kernow. Link to post Share on other sites More sharing options...
RMweb Premium stephennicholson Posted September 7, 2019 RMweb Premium Share Posted September 7, 2019 One irritation is the coupling pocket height, which seems to be the height formally used by Bachmann. No problem with tension lock as they are supplied with cranked versions, however nem kaydees are too high. So a little fiddling required. Link to post Share on other sites More sharing options...
RMweb Premium Phil Mc Posted September 7, 2019 RMweb Premium Share Posted September 7, 2019 Mine arrived this afternoon. As already mentioned, a fantastic level of detail has been achieved. (underneath, as well as up top!!) Lovely little wagons to add to my mixed freight workings once they've been dirtied up a bit !! Cheers, Phil. 1 Link to post Share on other sites More sharing options...
RMweb Gold tetsudofan Posted September 7, 2019 RMweb Gold Share Posted September 7, 2019 2 hours ago, stephennicholson said: One irritation is the coupling pocket height, which seems to be the height formally used by Bachmann. No problem with tension lock as they are supplied with cranked versions, however nem kaydees are too high. So a little fiddling required. Just found that out after fitting Hornby Roco couplings and tried to couple up to a Hornby loco. Maybe have to look for one of my older Bachmann locos to see if they work. Keith Link to post Share on other sites More sharing options...
Matt Posted September 8, 2019 Share Posted September 8, 2019 9 hours ago, tetsudofan said: Just found that out after fitting Hornby Roco couplings and tried to couple up to a Hornby loco. Maybe have to look for one of my older Bachmann locos to see if they work. Keith I can't think of a Bach loco where the coupling was out by much* apart from the old Class 40 (and I think that was too low if memory serves correct). I think what tetsudofan is referring to is the range of TTA based wagons (and engineering conversions such as Limpets etc.) which had the couplers set high and had cranked TL couplers. Agree on slight frustration about height being wrong but am prepared to forgive given how amazing the rest of the wagon is - I was not expecting the level of detail that has been achieved and the consequent number of separately fitted parts. * nearly every Bach loco in my fleet has required some fettling to get KD coupler at right height but mostly this is just small shims to account for slack in the NEM pocket Link to post Share on other sites More sharing options...
RMweb Premium Grampus Posted September 8, 2019 RMweb Premium Share Posted September 8, 2019 (edited) On 07/09/2019 at 10:19, Godfrey Glyn said: 'My two have just been delivered by the postie and I am mightily impressed. Well done Chris and his team! Photos taken on my iPhone which tends to distort some of the colours. They also never ran past Chard but that is covered by Rule 1. all the best Godfrey' Very pleased with mine, which arrived yesterday, though grateful for the thoughtful provision of spare buffers since mine appeared to have a rough shunt on route at one end - easily sorted though. Well done, Kernow. What a wonderful model. I am absolutely certain they must have passed Chard at some point, heading for Eastleigh for repair, and therefore heading past my locale - probably in the dead of night when nobody was watching though! ...Or at least, that's my story and I'm sticking to it! If pressed, IMTS also applies! Best wishes, Paul Edited September 8, 2019 by Grampus Typos 3 Link to post Share on other sites More sharing options...
pharrc20 Posted September 8, 2019 Share Posted September 8, 2019 Looking forward to receiving my pair hopefully they will arrive tomorrow as had dispatch email from Kernow on Friday. Likewise mine will be on Speedlow under rule 1 and a what if powdered lime traffic they were trialling the wagons. In reality some of these PRAs were used in some coal traffic out of Goole in the early 1990s for a time before being stored there and later disposed of. So you never know Steetley Lime at Speedlow might just have needed to try some once they had been cleaned out of the coal dust and debris... Cheers Paul 1 Link to post Share on other sites More sharing options...
Fat Controller Posted September 8, 2019 Share Posted September 8, 2019 Just now, pharrc20 said: Looking forward to receiving my pair hopefully they will arrive tomorrow as had dispatch email from Kernow on Friday. Likewise mine will be on Speedlow under rule 1 and a what if powdered lime traffic they were trialling the wagons. In reality some of these PRAs were used in some coal traffic out of Goole in the early 1990s for a time before being stored there and later disposed of. So you never know Steetley Lime at Speedlow might just have needed to try some once they had been cleaned out of the coal dust and debris... Cheers Paul The version without the covers was used for agricultural lime traffic from one of the quarries at Ferryhill, back in the late 1980s 1 Link to post Share on other sites More sharing options...
pharrc20 Posted September 8, 2019 Share Posted September 8, 2019 10 minutes ago, Fat Controller said: The version without the covers was used for agricultural lime traffic from one of the quarries at Ferryhill, back in the late 1980s Would those be the PMVs opens or the PRAs without the covers? Now Kernow have that chassis is there scope for them to do the Blue Circle Palvans, PMVs etc.? Cheers Paul Link to post Share on other sites More sharing options...
RMweb Premium 7013 Posted September 8, 2019 RMweb Premium Share Posted September 8, 2019 Have ordered two, bit disappointed to hear that when fitted with KD couplings they are too high. I am not a fan of having to mess around with new models, but not an insurmountable problem. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted September 8, 2019 RMweb Premium Share Posted September 8, 2019 4 hours ago, pharrc20 said: Now Kernow have that chassis is there scope for them to do the Blue Circle Palvans......? OOOOOOOOOOOOOOOOOOOOOOOh YES - I hope !!!! Regards, John Isherwood. 2 Link to post Share on other sites More sharing options...
Fat Controller Posted September 8, 2019 Share Posted September 8, 2019 5 hours ago, pharrc20 said: Would those be the PMVs opens or the PRAs without the covers? Now Kernow have that chassis is there scope for them to do the Blue Circle Palvans, PMVs etc.? Cheers Paul PMA; both the lower-sided ones with full-length bodies, and the higher-sided ones with the short body, were coded PMA, after air-brakes had been fitted. 1 Link to post Share on other sites More sharing options...
dogbox321 Posted September 9, 2019 Share Posted September 9, 2019 They are a nice wagon, well painted and well detailed, and I suppose in some ways they are niche, but they don't really have a wow factor for a 2 axle wagon at nearly £40. Even the lamp iron is moulded in the chassis, and not a separate fitting, nor does it have sprung buffers. They are a nice wagon, but I just think for nearly £40 a piece, its a top end price, and the specification should be up there too. Regards, C. Link to post Share on other sites More sharing options...
RMweb Premium 7013 Posted September 9, 2019 RMweb Premium Share Posted September 9, 2019 4 hours ago, dogbox321 said: They are a nice wagon, well painted and well detailed, and I suppose in some ways they are niche, but they don't really have a wow factor for a 2 axle wagon at nearly £40. Even the lamp iron is moulded in the chassis, and not a separate fitting, nor does it have sprung buffers. They are a nice wagon, but I just think for nearly £40 a piece, its a top end price, and the specification should be up there too. Regards, C. To be fair £40 by today’s standards is not a lot for a superb model (Bachmanns China Clay flats at around £20 a piece is a good example of over priced for really old tooling). Sprung buffers? Can’t say I really notice them. They are a niche model though and are China Clay orientated, coming from a Cornish model shop it is hardly surprising. As the prototypes are converted from another wagon it should be possible to convert them into other types. Link to post Share on other sites More sharing options...
treggyman Posted September 9, 2019 Share Posted September 9, 2019 Hi I collected my '4 pack' last Friday & am very pleased with them....... Have spent today fitting my own brand couplings & had a play this evening...... They will need weathering but look superb..... Here they are posed on my incomplete layout Hendra with the Kernow limited edition StBlazey brake van prior to a propelling move to Ponts Mill...... The 08 is a resprayed Bachmann loco renumbered & detailed to represent 08955....A loco I took pictures of at StBlazey as well as at Exeter StDavids When I collected my wagons I was proudly shown a scratchbuilt version of the wagon built by a staff member..... It is an excellent representation really well modelled & was apparently used I was told to help persuade the Chris to go into production of these wagons...... I would agree that sprung buffers would be good as I propel buffer to buffer but I am very pleased with my purchase..... Cheers Bill 10 Link to post Share on other sites More sharing options...
RMweb Premium 7013 Posted September 10, 2019 RMweb Premium Share Posted September 10, 2019 Received my wagons today, good packaging. I was worried about fitting kadees; they do sit a bit too high compared to my other Kadee fitted stock. However a couple of shims of plastic have brought them more or less into line with the others. Couplings aside the detail on these wagons is exemplary with the railings and frame detail being excellent. Worth every penny. 2 Link to post Share on other sites More sharing options...
Guest Posted September 11, 2019 Share Posted September 11, 2019 Hi all I’ve just converted mine to P4 the w irons are not wide enough and require thinning to allow P4 wheels to fit The brakes have a bar along the bottom to give them the correct spacing, I glue the ends of the rigging down before I thinned the bar to stop it fouling the P4 wheel sets when the W irons are thinned I took about 1mm off, then reamed the bearing out and cleared any plastic away test fit the wheel sets and make sure there’s no fouling and there’s it converted to P4 cheers will take about 30 minutes to do a wagon Roomey Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now