The Bigbee Line Posted July 6, 2018 Share Posted July 6, 2018 (edited) Ever the one for changing my mind I was sorting out the perennial messy state of the workshop and I noted that I had a stash of 18" - 24" wide boards. I had been looking at KESR based locations and will probably build Bodiam. A 'penny dropping' moment said why not somewhere on the Hayling Island Line, classic Terrier territory. On a couple of lengths of CLS timber sitting on 2 trestles provided a stand for the various boards. Enough waffle, here is the first iteration: Picture 1 - From the stops the lines from left to right are: Bay Platform, Platform Line, Run Round / Goods Line and Goods Siding. Picture 2 - Drivers Eye View - Peco Points Picture 3 - The line on the left needs a trap point. Picture 4 - View from the stops of the Bay Platform. Picture 5 - Close up of the station throat. I have lost a couple of sidings, but kept the bay platform as it was a big feature of the station. 976 14-07 1183 15-07 1537 23-07 2104 13-08 2565 25-08 2710 27-08 2829 28-08 3164 30-08 3386 31-08 3887 19-09 4290 23-09 4508 25-09 4809 28-09 5408 14-10 5686 16-10 6328 20-10 6745 22-10 7305 03-11-2018 8055 10-11-2018 8521 24-11-2018 18945 04-04-2020 20814 01-07-2020 22164 15-7-2020. 23658 31072020 Edited September 22, 2020 by The Bigbee Line 9 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 7, 2018 Author Share Posted July 7, 2018 Looking at my pictures taken yesterday, I think my 'curve' is too tight Looking at various pictures on the internet I found a useful flickr picture from John Law https://www.flickr.com/photos/johnmightycat/ https://www.flickr.com/photos/johnmightycat/6827642574/ by https://www.flickr.com/photos/johnmightycat/ on flickr It shows the curve on the open end of the platform. The main platform line looks quite curved, not so on the bay platform track. Not sure if that's the effect of the camera. Tonight I will have another go and ease up on the angles. Other items of interest: The replacement rail built SR style signal. Other pictures show 2 LBSC wooden post starting signals. The small signal box and the other wooden building. The 'must have' coal stage. Brick edged gravel topped platform. The station is shown on the 'side by side' maps web site. They have the 25" to the mile version available. Interestingly the bay line is there but the bit in the platform is not shown? 5 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 8, 2018 Author Share Posted July 8, 2018 (edited) We spent the day yesterday at the coast, North Norfolk Railways Suburban Gala. I was confirming Mk1 suburban measurements and getting detail photographs. Got a few funny looks from some staff, other were helpful and interested. The 4 set that the NNR run are very well turned out, both inside and outside. At some point I'd like a couple of 64 foot 10 compartment thirds. At the same time I was mulling over the track layout for my own version of Hayling Island. The curve on my first version was about 8' radius. I think I need to cut out some card curved for radius much larger and see how they look. Looking at the plan below you will see I am not modelling 2 of the sidings. The other 4 lines all come together in 3 sets of buffer stops. If I move these to one side of the board I get the various tracks away from being parallel with the front edge of the board. I will lay the track out for a second time later today.... I also drew out a 'fag packet' track plan. showing the key items: Platform - Brick edge, gravel top Platform Canopy Platform Signs Platform Seats Signal Box Signals Wooden Hut near signal box P Way Hut Station Building Buffer Stops Coal Stage I think that's about it. Need to finish my cup of tea and get on with it.... Edited July 8, 2018 by The Bigbee Line 3 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 8, 2018 Author Share Posted July 8, 2018 Tonight I cut out several curved templates, the largest being approximately 14' radius, I moved the points to a shallower angle and layed in the curve.. I end up with the release road at the end of the run round running off the edge of the board at that angle. I think I need to lay out the platform line first, then swing the curve to the points in the throat. Plus an even large radius curve.... That will be for tomorrow. Most of the pictures of the branch are from 1963. Are there any in early BR days when the terriers were still in Southern paint. 5 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 8, 2018 Author Share Posted July 8, 2018 Looking at various old maps the angle between the approach and the platforms is not that shallow. I think I will lay some paper under my next effort with a 28' radius then if the curve is suitable I can trace around the track to shuffle it into the best position. 3 Link to post Share on other sites More sharing options...
Tove Posted July 8, 2018 Share Posted July 8, 2018 Most of the pictures of the branch are from 1963. Are there any in early BR days when the terriers were still in Southern paint. This link takes you to a picture being described as 4th march 1950,leaving Havant; (second pic down) https://chasewaterstuff.wordpress.com/category/steam-locomotive-classes-of-a-leisurely-era/page/16/ Brian. Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 9, 2018 Author Share Posted July 9, 2018 This link takes you to a picture being described as 4th march 1950,leaving Havant; (second pic down) https://chasewaterstuff.wordpress.com/category/steam-locomotive-classes-of-a-leisurely-era/page/16/ Brian. Brian, Thanks for that, not seen that picture before 32661 is in Southern Black with 'sunshine' lettering. An easy one to do as there is no lining... Thanks. I think I'll make up a matrix.. Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 11, 2018 Author Share Posted July 11, 2018 Looking at various pictures on the internet I found a useful flickr picture from John Law https://www.flickr.com/photos/johnmightycat/ hayling flickr john law 00q.jpg https://www.flickr.com/photos/johnmightycat/6827642574/ by https://www.flickr.com/photos/johnmightycat/ on flickr The signal cabin at Hayling Island is of wooden construction. I am trying to make a drawing using the door and the boarding as a guide to scale. Is there any wooden structure in existence that has the same style of construction, I think the boarding is 'shiplap'? Any suggestions would be appreciated. https://www.flickr.com/photos/johnmightycat/6827642574/ by https://www.flickr.com/photos/johnmightycat/ on flickr shows the boarding. Link to post Share on other sites More sharing options...
Fat Controller Posted July 11, 2018 Share Posted July 11, 2018 The signal cabin at Hayling Island is of wooden construction. I am trying to make a drawing using the door and the boarding as a guide to scale. Is there any wooden structure in existence that has the same style of construction, I think the boarding is 'shiplap'? Any suggestions would be appreciated. hayling cabin flickr john law 00q.jpg https://www.flickr.com/photos/johnmightycat/6827642574/ by https://www.flickr.com/photos/johnmightycat/ on flickr shows the boarding. Ernie, here's the current style of 'ship-lap':- https://www.jewson.co.uk/timber/machined-softwoods/cladding/standard-redwood-shiplap/ I have a feeling the boards used to be wider; perhaps 9", with about a 3" overlap. Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 11, 2018 Author Share Posted July 11, 2018 Ernie, here's the current style of 'ship-lap':- https://www.jewson.co.uk/timber/machined-softwoods/cladding/standard-redwood-shiplap/ I have a feeling the boards used to be wider; perhaps 9", with about a 3" overlap. Brian, Thanks for that. Like you I think it was much wider. I can rough a drawing with various widths and see what looks right. If I can see a suitable wooden building of similar age it would help. The Railway Workshops would have produced all their own timber sections. Typical Ship Lap section shown below: Evergreen do a .040" (1.0mm) thick sheet with 6.3 mm groove spacing, the grooves are .93 mm so the boards are pitched at 7.23 mm, If I read their information sheet correctly. For such a small building I can score some sheet to suit. Link to post Share on other sites More sharing options...
3 link Posted July 11, 2018 Share Posted July 11, 2018 (edited) How's this for shiplap, about halfway down the page the little carting shed. http://www.rmweb.co.uk/community/index.php?/topic/125274-midland-in-bristol/page-14 Martyn. Edited July 11, 2018 by 3 link Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 11, 2018 Author Share Posted July 11, 2018 How's this for shiplap, about halfway down the page the little carting shed. http://www.rmweb.co.uk/community/index.php?/topic/125274-midland-in-bristol/page-14 Martyn. Martyn Thanks for the link. Nice shed. I think it’s overlapping board, not shiplac. I’m going to rough one out tomorrow Ernie 1 Link to post Share on other sites More sharing options...
doilum Posted July 11, 2018 Share Posted July 11, 2018 Brian, Thanks for that. Like you I think it was much wider. I can rough a drawing with various widths and see what looks right. If I can see a suitable wooden building of similar age it would help. The Railway Workshops would have produced all their own timber sections. Typical Ship Lap section shown below: Shiplap.jpg Evergreen do a .040" (1.0mm) thick sheet with 6.3 mm groove spacing, the grooves are .93 mm so the boards are pitched at 7.23 mm, If I read their information sheet correctly. For such a small building I can score some sheet to suit. The picture shows t&g cladding. Real ship lap are slightly tapered boards that overlap starting from the bottom up. A visit to a fencing or shed supplier will explain all. In 7mm, once you have worked out the size it should be fairly easy to do using 10thou plastikard strips. The overlap would probably be about 1.5 inches. Link to post Share on other sites More sharing options...
meil Posted July 11, 2018 Share Posted July 11, 2018 (edited) The signal cabin is done in weatherboard, which looks similar to tongue and groove. Edited July 11, 2018 by meil Link to post Share on other sites More sharing options...
Nearholmer Posted July 11, 2018 Share Posted July 11, 2018 (edited) Doilum I think you might be talking about featheredge boarding, which sometimes wrongly gets called shiplap. Bigbee I have a feeling that some of the small buildings on the KESR and Swanage Railway might be clad with proper shiplap. Picture of shiplap and featheredge below. Kevin Edited July 11, 2018 by Nearholmer 1 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 11, 2018 Author Share Posted July 11, 2018 The picture shows t&g cladding. Real ship lap are slightly tapered boards that overlap starting from the bottom up. A visit to a fencing or shed supplier will explain all. In 7mm, once you have worked out the size it should be fairly easy to do using 10thou plastikard strips. The overlap would probably be about 1.5 inches. The building must be tounge Doilum I think you might be talking about featheredge boarding, which sometimes wrongly gets called shiplap. Bigbee I have a feeling that some of the small buildings on the KESR and Swanage Railway might be clad with proper shiplap. Picture of shiplap below. Kevin Kevin, Thanks for the picture. I think it is the board that you show. I've been looking for similar. If you look at this Ian D Nolan picture of Hove, you can see that the signal box privy seems to have the style as in your example https://www.flickr.com/photos/31890193@N08/14414309795/sizes/k/ Link to post Share on other sites More sharing options...
Nearholmer Posted July 11, 2018 Share Posted July 11, 2018 (edited) It seems to have been quite common in the SE of England, and there was a fancy version used on some station buildings, by the SER I think, but possibly also the LBSCR, which had a decorative (dirt trapping) moulding routed into the front face. I'll see if I can find a picture. Vast quantities of shiplap here http://www.disused-stations.org.uk/e/eridge/index15.shtml Edited July 11, 2018 by Nearholmer Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 11, 2018 Author Share Posted July 11, 2018 It seems to have been quite common in the SE of England, and there was a fancy version used on some station buildings, by the SER I think, but possibly also the LBSCR, which had a decorative (dirt trapping) moulding routed into the front face. I'll see if I can find a picture. Vast quantities of shiplap here http://www.disused-stations.org.uk/e/eridge/index15.shtml Kevin, Nice picture of Eridge. That reminded me that we stopped off there last year.... Here is an enlargement of the mainline platform. The posters are Double Royal, so a 'fag packet' calculation is 5 boards = 40" so 8 inches per board. That makes the door approx. 80" high. Seems Ok to me. I'll draw it out with 8" boards.. Also had some pictures of the various nice posters etc.... 3 Link to post Share on other sites More sharing options...
sem34090 Posted July 12, 2018 Share Posted July 12, 2018 Kevin... why does that poster mis-name you? Link to post Share on other sites More sharing options...
Nearholmer Posted July 12, 2018 Share Posted July 12, 2018 (edited) Odd isn’t it. They also fail to underline the word ‘do’ in the question. Nice to see that I’m pictured on what was my ‘home station’ for the first twent or so years of my life, though. Edited July 12, 2018 by Nearholmer 2 Link to post Share on other sites More sharing options...
doilum Posted July 12, 2018 Share Posted July 12, 2018 Doilum I think you might be talking about featheredge boarding, which sometimes wrongly gets called shiplap. Bigbee I have a feeling that some of the small buildings on the KESR and Swanage Railway might be clad with proper shiplap. Picture of shiplap and featheredge below. Kevin Stand corrected!! 1 Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 14, 2018 Author Share Posted July 14, 2018 I've been thinking too much about the layout and decided to get on with it. The first picture shows the rough track layout for the platform and run round on 2 x 4' x 2' boards. The tracks from left to right are: Bay Platform, Platform Road, Run Round and Goods Siding. The aim is to have the tracks at the far base board joint at 90 degree's to the join. The bottom of the platform ramp will end at the baseboard joint. I will cheat and have a wooden foot crossing running along the joint to hide it. The run round should take 4 coaches if required. The shunt neck is small as it only has to take a Terrier... As the layout will live in the workshop I might add an additional set of points to lead to future goods sidings. . A point of interest is that pictures of the Bay do not show a loco on the stops, so I assume that the trains would arrive in the main platform road and shunt across to the bay after running round. Mixed trains and freights would arrive in the platform road and shunt after run round. Anyway, that's it for now. 2 Link to post Share on other sites More sharing options...
GRASinBothell Posted July 14, 2018 Share Posted July 14, 2018 I take it that you have the Middleton Press book "Branch Line to Hayling". That has a couple of pictures of the inside of the signal box, so you can see the other side of the boards (no little niceties like insulation!). That might help your drawing of it. It also has pictures of the other hut (referred to as an enginemen's mess hut), including one of the washing facilities ( a bowl of water on a stand outside the entrance!). Gordon Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 14, 2018 Author Share Posted July 14, 2018 I take it that you have the Middleton Press book "Branch Line to Hayling". That has a couple of pictures of the inside of the signal box, so you can see the other side of the boards (no little niceties like insulation!). That might help your drawing of it. It also has pictures of the other hut (referred to as an enginemen's mess hut), including one of the washing facilities ( a bowl of water on a stand outside the entrance!). . Gordon Thanks for the tip. Will need to look on line tonight. Sounds just the ticket Link to post Share on other sites More sharing options...
The Bigbee Line Posted July 14, 2018 Author Share Posted July 14, 2018 Track laying went into the night... Should have had some 7mm tilley lamps. I can remember as a kid watching the glow of the tilley lamps as the track gang worked at night. Like a fairy glow worm dancing, quite magical, I'd forgotten about that until tonight. Anyway, with Linda's help I had drawn some 30' ish curves and was able to use these with the curves in the platform. As mentioned previously the tracks were to cross one of the joins at 90 degrees (The first 2 inches of each track is straight). The platform line then straightened out and headed to a pre-determined position for the points for the loco run round. The curve was very slight, more so than I imagined. This is an overall picture of the 2 x 4 foot boards. the goods line on the left looks wrong being straight. I'm going to move it where it crosses the joint to a minimum 6 foot with the run round road, then to curve very very gently and end up almost parallel with the Loco release. Note the essential modelling aid - The Cup of Tea. I've ordered by Middleton Press 'Branch Line to Hayling', so look forward to the pictures. I have made the platform 12' wide. Maybe I will cut out a card version to see how it looks. The surface looks like gravel with brick faces. The joint should be hidden by the canopy. Let's see what tomorrow brings. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now