61661 Posted March 11, 2021 Share Posted March 11, 2021 3 hours ago, Enterprisingwestern said: , or flog 'em off cheap to those of us with a IPA/Dettol/Dot 4 bath of death? Of course, that's assuming you'd sell one to a Blade?!! Mike. No chance. If you're a Bl**e then you can only have a duff one! ;-) Seriously though, we are waiting to see how many are actually returned before making a decision on what to do with them. If it's just a few then they might be sold off as seconds at a show (on the assumption that shows will start again at some point), but swapping them for new bodies is also an option. UTO! 3 2 Link to post Share on other sites More sharing options...
RMweb Gold 96701 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 D7667 has just started its running in session on the DC rolling road, and it looks fabulous. Just got to fix the "cab lighting" and cover over a tail lamp which I will do when I fit the ESU Lokpilot decoder that I have for it. 1 Link to post Share on other sites More sharing options...
maico Posted March 11, 2021 Share Posted March 11, 2021 4 hours ago, AY Mod said: That was done to death several pages ago, why restart it? Did you read those parts or not? No, is the answer. I click on the activity tab and skim through that. If I'm going to post I look back through a few pages on the thread first. There are far too many posts on the forum to read everything! Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 10 minutes ago, 96701 said: D7667 has just started its running in session on the DC rolling road, and it looks fabulous. Just got to fix the "cab lighting" and cover over a tail lamp which I will do when I fit the ESU Lokpilot decoder that I have for it. A little black paint did the trick with mine. Prepare for disco lights if you run it before the (acrylic) paint’s dried though! 1 Link to post Share on other sites More sharing options...
Butler Henderson Posted March 11, 2021 Share Posted March 11, 2021 17 minutes ago, maico said: No, is the answer. I click on the activity tab and skim through that. If I'm going to post I look back through a few pages on the thread first. There are far too many posts on the forum to read everything! There is a search function. One suggestion that will no doubt get a you have to be kidding from the moderators would be to split such threads up into sections like the announcement (which would be locked now), prototype details, pre production (again locked now), the released model and DCC Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 39 minutes ago, 61661 said: No chance. If you're a Bl**e then you can only have a duff one! ;-) Seriously though, we are waiting to see how many are actually returned before making a decision on what to do with them. If it's just a few then they might be sold off as seconds at a show (on the assumption that shows will start again at some point), but swapping them for new bodies is also an option. UTO! I’d be up for a duff rat! That sounds a bit rude! There’s nothing a respray won’t sort, though! 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted March 11, 2021 RMweb Premium Share Posted March 11, 2021 (edited) 5 minutes ago, Butler Henderson said: There is a search function. One suggestion that will no doubt get a you have to be kidding from the moderators would be to split such threads up into sections like the announcement (which would be locked now), prototype details, pre production (again locked now), the released model and DCC i've always wanted one thread for gushing - mine will be x/my wallet hurts/its been an open goal (because i wanted one)/it looks fine to me there are bigger problems in the world (but i'm here reading anyway)/will it have opening doors etc. and then one to talk about the model, including any flaws for those inclined to fix them. Edited March 11, 2021 by Hal Nail 1 Link to post Share on other sites More sharing options...
Administrators AY Mod Posted March 11, 2021 Administrators Share Posted March 11, 2021 26 minutes ago, maico said: No, is the answer. Not a surprising answer but it's annoying when something that's already been well-covered gets brought up again by someone who's late to the party and not paying attention at the back. It shows a lack of respect for anyone who's previously posted about it as you'll think your post is more important than taking the time to read the contributions of others. 2 3 2 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 1 hour ago, 61661 said: No chance. If you're a Bl**e then you can only have a duff one! ;-) Seriously though, we are waiting to see how many are actually returned before making a decision on what to do with them. If it's just a few then they might be sold off as seconds at a show (on the assumption that shows will start again at some point), but swapping them for new bodies is also an option. UTO! Maybe Sell the chassis..? It allows some of us to Strip the motors and gears, for those who want unpowered Ethels. Link to post Share on other sites More sharing options...
Zunnan Posted March 11, 2021 Share Posted March 11, 2021 (edited) Game on for seeing how cheaply I can get a comparable twin speaker V5 into this. Overall the impression formed from photos up until now has not been altered. That is that it is a competent model, but its not without its flaws. Starting with the positives, overall it looks like a Rat. The overall shape is decent and the chassis is a much needed tonic to the bad taste left since the 1970s with Hornbys model and 20 odd years with the old Bachmann model. Running, out of the box and not run in it started to crawl consistently with a current draw of just 70mA and movement was barely discernible. Running in at a medium pace, it started off with a draw of 200mA, which after 10 minutes or so had fallen to 150mA as it bedded in. Very good indeed. I measured a peak draw of 450mA when flooring it with a load where it reached a slightly excessive speed but I wouldn't say its too much. Its a far cry from when I had Tubby Duffs and was used to seeing upwards of 1.5A!!! Stall current came in at just under 700mA. Its safe to say I like the underpinnings of this model, quite a lot. All up weight is a bit low. The old Bachmann Rats are 460g, and the 24/1 comes in at 417g. But these things weren't power monsters, even at 336g it'll manage more than a prototypical loading, so no problems there. I may add a little when I go through the DCC install, there is certainly plenty of room for more ballast. The glazing of my example, unlike that of a few photos shown thus far was all pushed fully home, as were the headcodes. I stand by my comment stating I think the glazing edges that of Bachmanns 24/1. The Heljan is better glazed, with the added caveat that it is fitted properly, as some photos do show its not always fitted flush. On to the bits I have concern with. The windscreen surrounds especially at the top edge are tiny, I think this is where they look a bit odd. What I might try is some N Gauge first class yellow lining transfers to beef them up, either that or strip the glazing and get the bow pen out. The headcode box front sits back behind the gutter. People have said that 0.1mm makes next to no difference, this is one of those instances where a fraction of a mm does make a difference. Shimming with plasticard or a bespoke etch will fix it. I also have questions over the angle of the wings on either side. I don't think they're quite angled enough. That grille. Yes, its etched. Yes, there is actually deeper detail behind it too, but the etching is too coarse to effectively make use of the detail back there, which is a shame. Again, an opening for an aftermarket etch and its a pretty easy fix. The roof grille, while tidily etched, doesn't quite convey the bulk of the real thing. One for the already available extreme etchings multi layered fan grille. The cab door is what it is. Its wrong, plain and simple. I can't see any other way to correct it than to cut away the door and replace it. Perhaps one day an etched detailing pack can be put together covering the door, headcode and grille. On 10/03/2021 at 20:18, blueeighties said: I don't. Heljan never specified working internal cab lighting. Sounds as though the rear cover sealing any extraneous light from the headcode marker led board has either come adrift or is missing. Quite unprofessional for a retailer to go on a rant such as that, same with last weeks photos. If a new release loco lands on my bench and has any issues during initial inspection, I'll take it up with the supplier. Yes, they did. And the wording of the supplied instruction sheet implies that they are independent of the marker lights. The reality of the lighting is that the headcode lights and cab lights are one and the same and a bit of a fudge. I'd be inclined to seal the back of the headcode panel and dull the LED to something a bit less effulgent, and if I wanted to reinstate true cab lighting (for DCC) to then use a spare aux on the decoder to provide cab lighting on its own function. The V5 has plenty of capacity to do this. As for my little project, the challenge is to DCC sound fit to a comparable spec to the SLW model and do so as cheaply as I can find possible. The SLW DCC sound is a £110 option. Loco- sourced. £153 no postage cost as currently offered postage free from RoS. Sound project - £110.50 so far*. Loksound V5 - sourced £105 (less 10% club discount, I have paid £94.50, no postage), needs blowing but I have a friend and a lokprogrammer, *now it depends on how much a good soundfile will cost. Speakers - starting with the R&R route of two 25x25x7 megabass, currently on sale for £7 a pop. £14 plus a few quid postage. Edited March 13, 2021 by Zunnan Correcting postage info 1 3 Link to post Share on other sites More sharing options...
The Ghost of IKB Posted March 11, 2021 Share Posted March 11, 2021 19 hours ago, blueeighties said: I don't. Heljan never specified working internal cab lighting. Sounds as though the rear cover sealing any extraneous light from the headcode marker led board has either come adrift or is missing. Quite unprofessional for a retailer to go on a rant such as that, same with last weeks photos. If a new release loco lands on my bench and has any issues during initial inspection, I'll take it up with the supplier. You must be of a sensitive disposition if you think thats a "rant", especially when it turns out he is right about the cab lights and sadly you are mistaken. Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 6 hours ago, 61661 said: No chance. If you're a Bl**e then you can only have a duff one! ;-) I blame your dad, and to think I used to go trainspotting with him! Mike. Link to post Share on other sites More sharing options...
RMweb Gold 96701 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 A bit of black insulating tape on the back of the headcodes and over one of the tail lights at each end may well have sorted the lighting issues, decoder fitted and am one happy bunny. Link to post Share on other sites More sharing options...
PenrithBeacon Posted March 11, 2021 Share Posted March 11, 2021 The impression I get so far is that it's better to wait until both the SLW and Bachmann models are available before I take the plunge. I don't understand why lights are so important for pre-marker light day's green engines. Nor do I understand why they're important when most layouts are simulating daylight conditions. My recollection is that cab lights wouldn't be used while the locomotive was running and the direction lights were so dim (assuming they were working anyway) that they couldn't be seen. Wasn't this why marker lights were introduced? If I do get around to replacing my green Bachmann the model will have all lights disabled. So much more prototypical for the sixties. 2 2 1 Link to post Share on other sites More sharing options...
aureol40012 Posted March 11, 2021 Share Posted March 11, 2021 3 hours ago, Zunnan said: Game on for seeing how cheaply I can get a comparable twin speaker V5 into this. Overall the impression formed from photos up until now has not been altered. That is that it is a competent model, but its not without its flaws. Starting with the positives, overall it looks like a Rat. The overall shape is decent and the chassis is a much needed tonic to the bad taste left since the 1970s with Hornbys model and 20 odd years with the old Bachmann model. Running, out of the box and not run in it started to crawl consistently with a current draw of just 70mA and movement was barely discernible. Running in at a medium pace, it started off with a draw of 200mA, which after 10 minutes or so had fallen to 150mA as it bedded in. Very good indeed. I measured a peak draw of 450mA when flooring it with a load where it reached a slightly excessive speed but I wouldn't say its too much. Its a far cry from when I had Tubby Duffs and was used to seeing upwards of 1.5A!!! Stall current came in at just under 700mA. Its safe to say I like the underpinnings of this model, quite a lot. All up weight is a bit low. The old Bachmann Rats are 460g, and the 24/1 comes in at 417g. But these things weren't power monsters, even at 336g it'll manage more than a prototypical loading, so no problems there. I may add a little when I go through the DCC install, there is certainly plenty of room for more ballast. The glazing of my example, unlike that of a few photos shown thus far was all pushed fully home, as were the headcodes. I stand by my comment stating I think the glazing edges that of Bachmanns 24/1. The Heljan is better glazed, with the added caveat that it is fitted properly, as some photos do show its not always fitted flush. On to the bits I have concern with. The windscreen surrounds especially at the top edge are tiny, I think this is where they look a bit odd. What I might try is some N Gauge first class yellow lining transfers to beef them up, either that or strip the glazing and get the bow pen out. The headcode box front sits back behind the gutter. People have said that 0.1mm makes next to no difference, this is one of those instances where a fraction of a mm does make a difference. Shimming with plasticard or a bespoke etch will fix it. I also have questions over the angle of the wings on either side. I don't think they're quite angled enough. That grille. Yes, its etched. Yes, there is actually deeper detail behind it too, but the etching is too coarse to effectively make use of the detail back there, which is a shame. Again, an opening for an aftermarket etch and its a pretty easy fix. The roof grille, while tidily etched, doesn't quite convey the bulk of the real thing. One for the already available extreme etchings multi layered fan grille. The cab door is what it is. Its wrong, plain and simple. I can't see any other way to correct it than to cut away the door and replace it. Perhaps one day an etched detailing pack can be put together covering the door, headcode and grille. Yes, they did. And the wording of the supplied instruction sheet implies that they are independent of the marker lights. The reality of the lighting is that the headcode lights and cab lights are one and the same and a bit of a fudge. I'd be inclined to seal the back of the headcode panel and dull the LED to something a bit less effulgent, and if I wanted to reinstate true cab lighting (for DCC) to then use a spare aux on the decoder to provide cab lighting on its own function. The V5 has plenty of capacity to do this. As for my little project, the challenge is to DCC sound fit to a comparable spec to the SLW model and do so as cheaply as I can find possible. The SLW DCC sound is a £110 option. Loco- sourced. £153 no postage cost as over £50 from RoS. Sound project - £110.50 so far*. Loksound V5 - sourced £105 (less 10% club discount, I have paid £94.50, no postage), needs blowing but I have a friend and a lokprogrammer, *now it depends on how much a good soundfile will cost. Speakers - starting with the R&R route of two 25x25x7 megabass, currently on sale for £7 a pop. £14 plus a few quid postage. I think the Jamie Goodman 25 v5 decoder is the cheapest decent option out there. It’s the way I’ve gone. 1 1 Link to post Share on other sites More sharing options...
Stevelewis Posted March 11, 2021 Share Posted March 11, 2021 11 hours ago, sulzer71 said: For £305 I'm guessing you didn't get the super cap option? I have 2 SLW 24's that have cost me £325 ea + delivery , I also have one that I bought second hand that had been seriously mistreated by it's previous owner , fortunately after a lovely chat with Phil all the parts on the model that were missing/damaged were in the post to me , also there will be no difference in price with the 25's when they are released To Be quite honest although we have purchased several SLW 24s, we have never seen the need for supercaps, ( should point out that the SLW 24s already have a smaller capacitor fitted as standard (info given to my from SLW in the early days), I have been digital since 1997 long before the concept of using capacitors to overcome power collection problems (and Bus Bars for that matter) I have built several ;layouts from Z thro to G in that time and providing track is kept reasonably clean extremely few power collections have occured Did the 2nd hand loco come from our friends in Sheffield? Link to post Share on other sites More sharing options...
meatloaf Posted March 11, 2021 Share Posted March 11, 2021 What decoders are people fitting? A video has popped up on youtube showing the lights being wrong - ie tail lights on when going forwards and headcode lights on when going backwards. He says its the chip hes using? Has anyone else had this issue? Link to post Share on other sites More sharing options...
RMweb Gold 96701 Posted March 11, 2021 RMweb Gold Share Posted March 11, 2021 58 minutes ago, meatloaf said: What decoders are people fitting? A video has popped up on youtube showing the lights being wrong - ie tail lights on when going forwards and headcode lights on when going backwards. He says its the chip hes using? Has anyone else had this issue? Unfortunately some folk on here have started rattling on about other manufacturer's Class 25s. If you are referring to Heljan 25s, mine is fitted with a Lokpilot and the directional lights work correctly. One thing that I have noticed is that Reverse on the handset puts the loco in the direction of No 1 end (where the fan is). All my other locos are Forward to o 1 end, so I will have to do a bit of tweaking. Link to post Share on other sites More sharing options...
Opelsi Posted March 11, 2021 Share Posted March 11, 2021 5 minutes ago, 96701 said: Unfortunately some folk on here have started rattling on about other manufacturer's Class 25s. If you are referring to Heljan 25s, mine is fitted with a Lokpilot and the directional lights work correctly. One thing that I have noticed is that Reverse on the handset puts the loco in the direction of No 1 end (where the fan is). All my other locos are Forward to o 1 end, so I will have to do a bit of tweaking. Exactly the same with my Lenz Silver+ fitted to Heljan's 25252. An easy fix for me though as my ESU ECoS have an option to rectify. Link to post Share on other sites More sharing options...
meatloaf Posted March 11, 2021 Share Posted March 11, 2021 1 hour ago, 96701 said: Unfortunately some folk on here have started rattling on about other manufacturer's Class 25s. If you are referring to Heljan 25s, mine is fitted with a Lokpilot and the directional lights work correctly. One thing that I have noticed is that Reverse on the handset puts the loco in the direction of No 1 end (where the fan is). All my other locos are Forward to o 1 end, so I will have to do a bit of tweaking. It was deffo a Heljan tamworth castle. It was more than revered direction. Ive had that before and corrected it via CV29 but the lights operated correctly. In this video the lights and direction are wrong. Not sure how thats corrected. Heljan Class 25 'Tamworth Castle' (OO Gauge) in Ice Cream Van Livery - YouTube Link to post Share on other sites More sharing options...
RMweb Gold 96701 Posted March 12, 2021 RMweb Gold Share Posted March 12, 2021 16 minutes ago, meatloaf said: It was deffo a Heljan tamworth castle. It was more than revered direction. Ive had that before and corrected it via CV29 but the lights operated correctly. In this video the lights and direction are wrong. Not sure how thats corrected. Heljan Class 25 'Tamworth Castle' (OO Gauge) in Ice Cream Van Livery - YouTube The person posting the videos states quite clearly that the fault is with the decoder which he has taken from another loco. He also states clearly that the fault is not the loco. 1 1 Link to post Share on other sites More sharing options...
meatloaf Posted March 12, 2021 Share Posted March 12, 2021 7 hours ago, 96701 said: The person posting the videos states quite clearly that the fault is with the decoder which he has taken from another loco. He also states clearly that the fault is not the loco. Yes i know hence why i asked what decoders people are using. Id got a standard Bachmann 21 pin to hand id planned on using. As i said i have had the issue of the loco running the opposite way before but never had the lighting reversed as well. Can this be sorted using CV settings? If do which ones. Thanks Link to post Share on other sites More sharing options...
sulzer71 Posted March 12, 2021 Share Posted March 12, 2021 12 hours ago, Stevelewis said: To Be quite honest although we have purchased several SLW 24s, we have never seen the need for supercaps, ( should point out that the SLW 24s already have a smaller capacitor fitted as standard (info given to my from SLW in the early days), I have been digital since 1997 long before the concept of using capacitors to overcome power collection problems (and Bus Bars for that matter) I have built several ;layouts from Z thro to G in that time and providing track is kept reasonably clean extremely few power collections have occured Did the 2nd hand loco come from our friends in Sheffield? Yeah , I've noticed they had a smaller capacitor as I've had the non sound ones previously and swapped the complete circuit boards with super caps from a couple of green ones I bought which didn't fit in with what I model then sold those on , I prefer to get them with the cap fitted as a precaution anyway and yes , it came from that shop in Sheffield Link to post Share on other sites More sharing options...
RMweb Premium csvt2004 Posted March 12, 2021 RMweb Premium Share Posted March 12, 2021 I have looked into fitting a Zimo 21 pin sound decoder. The zimo documentation suggests that speaker connections will be on the manufacturers circuit board. I think that I have found the connection in the picture. But none of this gets a mention in the instructions. I think the expression is "you are on your own". Link to post Share on other sites More sharing options...
rembrow Posted March 12, 2021 Share Posted March 12, 2021 I managed to deal with the cab lights yesterday. I'm not convinced they are the same led as the indicator, anyway where the indicator box carries on into the cab, there is a triangular cut out in the side within the cab, the led sits in this aperture. I made triangular pieces of plasticard to fit the aperture and glued in place. This has blotted out the cab light but can be reversed by pulling off the plasticard fillet. What surprises me is that while Heljan have increased the lighting functions, they are still not making some functions, like cab lighting, switchable for dc users. They are still behind both Bachmann and Dapol in this respect, who include micro switches for lighting functions in dc. 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now