timbowilts Posted May 26, 2018 Share Posted May 26, 2018 Good evening folks. I have just spent a very frustrating afternoon trying to paint the glazing bars, but not the glazing, on a set of Replica glazing for a Mk1 coach. Needless to say I’ve failed every time. Does anyone out there have any tips for how to actually do it before I chuck the whole coach in the bin? Tim T Link to post Share on other sites More sharing options...
RMweb Gold Geep7 Posted May 26, 2018 RMweb Gold Share Posted May 26, 2018 Easiest way I found was dipping the end of a cocktail stick in the paint and dragging it across the bars. Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted May 26, 2018 RMweb Gold Share Posted May 26, 2018 A mapping pen might be of some use as well. I remember doing this years ago on an Airfix Centenary that needed ventilators to match their lined maroon (actually Airfix used a weird sort of purple that was never all that convincing, though it did look a bit like weathered and faded maroon) livery. I scribed the ventilators on to the windows rather crudely with something pointy, and applied maroon paint with a fine brush, a delicate job that I doubt I have the eyesight or steadiness of hand to manage these days!. A friend made a much better job of his with a mapping pen directly on to the glazing. Link to post Share on other sites More sharing options...
stewartingram Posted May 26, 2018 Share Posted May 26, 2018 I've just been experimenting with a Sharpie fine point pen for some dmu windows in silver. Seems a good way of doing it. Stewart Link to post Share on other sites More sharing options...
Steamport Southport Posted May 26, 2018 Share Posted May 26, 2018 I was wondering what the problem was as I've never had a Replica coach. Then I looked at the website. They are like the old Kitmaster coaches. I would go down the cocktail stick route or very small paintbrush personally. Just a tiny bit at a time and make sure you have a bit of cloth with some thinners at hand if you do make a mistake. Or maybe use acrylic which cleans with water. Jason Link to post Share on other sites More sharing options...
timbowilts Posted May 27, 2018 Author Share Posted May 27, 2018 I've just been experimenting with a Sharpie fine point pen for some dmu windows in silver. Seems a good way of doing it. Stewart I had thought of that but they don’t seem to do maroon? Tim T Link to post Share on other sites More sharing options...
stewartingram Posted May 27, 2018 Share Posted May 27, 2018 Fair comment,but try Google? There is a Sharpie website showing the colour range.I didn't know they did silver, Ebay is a good source of individual colours. Just for the record, I'm playing with a 3D print dmu body. I silvered the toplights and main window frames very easily. I've since given it a brush coat of green, getting some on the silver. I was then able to touch up the silver easily with the pen. Biggest problem now is to smooth off the body before properly painting it. Stewart Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted May 27, 2018 RMweb Premium Share Posted May 27, 2018 You could lay masking tape to ensure a straight edge then use paint in the gap? Link to post Share on other sites More sharing options...
timbowilts Posted May 27, 2018 Author Share Posted May 27, 2018 You could lay masking tape to ensure a straight edge then use paint in the gap?That would be a bit b****y awkward around the ventilators! Tim T Link to post Share on other sites More sharing options...
stewartingram Posted May 27, 2018 Share Posted May 27, 2018 What about a coffee stirrer (MacDonalds etc)? Shape the end to a chisel point, hold it where you would have put the tape, then colour in. Stewart Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted May 27, 2018 RMweb Premium Share Posted May 27, 2018 That would be a bit b****y awkward around the ventilators! Tim T I’ve never had any issues. Link to post Share on other sites More sharing options...
SRman Posted May 28, 2018 Share Posted May 28, 2018 I would go the Sharpie route, having successfully used a silver one to paint in the window frames on a Bratchell class 455 kit.Painting the Window Frames - 1 by Jeffrey Lynn, on Flickr 4 Link to post Share on other sites More sharing options...
RMweb Gold Right Away Posted May 29, 2018 RMweb Gold Share Posted May 29, 2018 Never having attempted this on rolling stock, I might be speaking utter rubbish. Would it not be possible to lightly score the glazing bars with a craft knife? Then apply paint to the whole then wipe off leaving paint in the score lines. Link to post Share on other sites More sharing options...
timbowilts Posted May 29, 2018 Author Share Posted May 29, 2018 Never having attempted this on rolling stock, I might be speaking utter rubbish. Would it not be possible to lightly score the glazing bars with a craft knife? Then apply paint to the whole then wipe off leaving paint in the score lines. Unfortunately not. The bars are raised to represent the actual window frames separating the main window pane from the sliding ventilators. Tim T Link to post Share on other sites More sharing options...
Steamport Southport Posted May 29, 2018 Share Posted May 29, 2018 These are them. RA34. http://www.replicarailways.co.uk/spares-and-accessories/accessories Posted so that people can see the difficulty in painting them. Jason Link to post Share on other sites More sharing options...
peak experience Posted August 6, 2018 Share Posted August 6, 2018 These are them. RA34. http://www.replicarailways.co.uk/spares-and-accessories/accessories Posted so that people can see the difficulty in painting them. Jason Did you have any joy Jason? Link to post Share on other sites More sharing options...
Campaman Posted August 7, 2018 Share Posted August 7, 2018 When building model aircraft kits I always use a cocktail stick to do the glazing bars on the cockpit canopies, easiest way I have found, its like having a very fine nib pen, you just have to keep dipping in the paint reguarly. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now