Black Marlin Posted August 16, 2023 Author Share Posted August 16, 2023 I then started hunting through boxes of wagons to see what more elderly items could be improved. The Mainline 7-plank opens were an obvious choice. Refitted with Hornby metal wheels, they run much better; filled with suitable resin loads painted by myself, they look the part. Persil, of course, would take sacks... ...while Bass and Horlicks were crying out for some wooden barrels (lots of drybrushing required to get the wood effect I wanted!): 6 Link to post Share on other sites More sharing options...
Black Marlin Posted August 16, 2023 Author Share Posted August 16, 2023 For a pair of wagons belonging to a matchmaker, some balsa timber baulks would suffice: 5 Link to post Share on other sites More sharing options...
Black Marlin Posted August 16, 2023 Author Share Posted August 16, 2023 Finally, I found a fully finished metal load on eBay for only a couple of pounds but which really looks the business in this wagon belonging to the "Patent Nut and Bolt Company Limited". 6 Link to post Share on other sites More sharing options...
RMweb Premium Rich_F Posted August 16, 2023 RMweb Premium Share Posted August 16, 2023 4 minutes ago, Black Marlin said: Finally, I found a fully finished metal load on eBay for only a couple of pounds but which really looks the business in this wagon belonging to the "Patent Nut and Bolt Company Limited". Looks similar (possibly same retailer) I used to get scrap wagon loads before! Agree they look great once painted. 1 Link to post Share on other sites More sharing options...
SRman Posted August 16, 2023 Share Posted August 16, 2023 This is a lovely layout, very nicely done. However, when I saw the name "Girtby Sea", I immediately thought it should be an Australian layout (look up our national anthem! 😅 ). 1 2 Link to post Share on other sites More sharing options...
Black Marlin Posted August 16, 2023 Author Share Posted August 16, 2023 1 minute ago, SRman said: This is a lovely layout, very nicely done. However, when I saw the name "Girtby Sea", I immediately thought it should be an Australian layout (look up our national anthem! 😅 ). Well done for identifying the source of the layout's name! Obviously the layout itself won't be Australian, but given that it will eventually feature approx. 70' of coastline, and that - in keeping with many large Australian layouts - it will be housed in a barn, "Girtby Sea" seemed as good a name as any and better than the others I toyed with! 1 1 Link to post Share on other sites More sharing options...
SRman Posted August 16, 2023 Share Posted August 16, 2023 1 minute ago, Black Marlin said: Well done for identifying the source of the layout's name! Obviously the layout itself won't be Australian, but given that it will eventually feature approx. 70' of coastline, and that - in keeping with many large Australian layouts - it will be housed in a barn, "Girtby Sea" seemed as good a name as any and better than the others I toyed with! Thanks for that. I only recently "discovered" your thread, and I look forward to seeing the further developments as you go. Good luck with the future additions. 🙂👍 1 Link to post Share on other sites More sharing options...
Black Marlin Posted August 19, 2023 Author Share Posted August 19, 2023 (edited) On 16/08/2023 at 08:38, Black Marlin said: In other news, I've just placed an order for 700 screws of various sizes and some hot wire foam cutters [...] And while buying rolling stock can feel like an indulgence, buying tools feels like something much more upright, sober and puritanical. The screws and the cutter arrived yesterday, which was pretty swift given that I paid no delivery charges. I got them from cpc.farnell.com, if that information is of use to anyone. And I paid about half what it would have cost at B&Q. Tomorrow I'll go and get some more battening and see about making a temporary supporting framework for the baseboard so I can work on it in the house. I suppose I should also confess, after explaining how buying rolling stock feels like an indulgence, that I've just bought a Hornby K1. M'Luds, I offer the following two facts in mitigation: 1. Brand new, and including postage, it was less than £90. 2. It enables me to complete a six-track set. You see, my layout will have seven loops of various sorts (4 mainlines, 2 branchlines, 1 narrow gauge) capable of simultaneous running, and this K1 enables me to operate all six standard-gauge lines with late-crest ER stock. (The trains in question, if you're interested, are as follows: Quayside = Class 03 + loaded lowfits; Down Slow = J39 + Bridge Girder train; Down Fast = DP1 + Tees-Tyne Pullman; Up Fast = V2 + Express [lit maroon BR Mk1s]; Up Slow = K1 + Parcels; Upper Branchline = Class 105). Edited August 19, 2023 by Black Marlin Decided to add photographs 8 Link to post Share on other sites More sharing options...
RMweb Gold 5BarVT Posted August 19, 2023 RMweb Gold Share Posted August 19, 2023 41 minutes ago, Black Marlin said: The screws and the cutter arrived yesterday, which was pretty swift given that I paid no delivery charges. I got them from cpc.farnell.com, if that information is of use to anyone. My ‘go to’ online supplier for a lot of stuff. Paul. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now