High Level Kits Posted February 7, 2018 Author Share Posted February 7, 2018 With Hatton's confirming that they are only doing the 6' WB - (thanks Porcy for asking) - does that open the possibility for High Level to produce some WB variations? e.g. 7' WB? that is assuming there are not too many above WB changes also? J Yes, all this makes sense if I can get the wheels... Although they were a standard design, they were many variations to meet customers' requirements. As long as the bodies were more or less the same, I could incorporate as many as possible. 1 Link to post Share on other sites More sharing options...
Adam Posted February 7, 2018 Share Posted February 7, 2018 From the materials I have to hand (mostly IRS volumes and the list featured here - http://www.industrial-loco.org.uk/works_list800.htm - but also details of preserved Barclay 0-4-0s, most (if not all) of the 16" locos had 3' 7" wheels near identical to the 3' 8" Gibson supply. That being the case, the 16" is already catered for (happily that's the version I have on order). Adam Link to post Share on other sites More sharing options...
davknigh Posted February 7, 2018 Share Posted February 7, 2018 I suspect Colin’s main problem would be the production of a suitable wheel centre as he already produces tyres in the right size. If a master could be produced, and here’s where the 3D printing comes in, it might make the prospect more interesting/economical. Alan Buttler at Modelu *might* be able to help if someone has a drawing of the proper Barclay wheel. One can but ask... Cheers, David Link to post Share on other sites More sharing options...
davknigh Posted February 7, 2018 Share Posted February 7, 2018 Another thought occurred to me (two in one day!). I was looking at a review of the Brassmasters detailing kit for the Bachmann G2 and had to wonder if an etched overlay might do the trick for converting wheels of the right diameter to an acceptable appearance? Have to go and rest now... Cheers, David Link to post Share on other sites More sharing options...
High Level Kits Posted February 8, 2018 Author Share Posted February 8, 2018 Another thought occurred to me (two in one day!). I was looking at a review of the Brassmasters detailing kit for the Bachmann G2 and had to wonder if an etched overlay might do the trick for converting wheels of the right diameter to an acceptable appearance? Have to go and rest now... Cheers, David David, I appreciate your support and suggestions. I need to be able to offer the customer a chassis that, after investing money and time in, looks at least as good as the RTR one, and I just don't think etched spokes would achieve that. I know from talking to Colin that plastic wheels are not as easy to make as people might think. The interference fit of the plastic centre in both in the rim and on the axle, means there is considerable stress present in the spokes, and between them around the bore. This is asking a lot from the moulding material, and the sizes need to be right. I think I’d prefer to stick with the tried and tested methods... I can go ahead using the existing larger Barclay 3’8’’ wheel and hope Colin can find the time to sort the smaller one at some point. 1 Link to post Share on other sites More sharing options...
rope runner Posted February 8, 2018 Share Posted February 8, 2018 Will the cylinders/cross heads be included, or will the cylinder assembly be from the Hattons model? From a purely selfish viewpoint, I find it easier to work in metal - hoping I can perhaps use a 16'' High Level chassis under a Mercian kit... Paul A. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted February 8, 2018 RMweb Premium Share Posted February 8, 2018 The Markits wheel is an accurate copy of the smaller Barclay wheel centre which has 7 spokes. We got Mark to produce it specially for our 01 kit - then we had to add overlays to fit Gibson wheels for P4 modellers. Link to post Share on other sites More sharing options...
RMweb Premium Grovenor Posted February 8, 2018 RMweb Premium Share Posted February 8, 2018 Maybe have a word with David, his Manning Wardle wheels were reported to work out. https://www.scalefour.org/forum/viewtopic.php?f=20&t=5419 Regards Link to post Share on other sites More sharing options...
avonside1563 Posted February 9, 2018 Share Posted February 9, 2018 Something to keep in mind is that Barclay's were early proponants of standardisation and didn't bother messing around with different jigs for the frames so any hole drilled in one side is also on the opposite side, such as the fixing holes for the steam brake. Barclays are a wonderfully simple and chunky engine, no frills and does exactly what it says on the tin. The 14" and 16" are not the best of steamers without some modification, but they will carry on clumping along happily on 100psi albeit not quite as quick as at 160psi! Link to post Share on other sites More sharing options...
High Level Kits Posted February 9, 2018 Author Share Posted February 9, 2018 The Markits wheel is an accurate copy of the smaller Barclay wheel centre which has 7 spokes. We got Mark to produce it specially for our 01 kit - then we had to add overlays to fit Gibson wheels for P4 modellers. Mike, have you a reference for this wheel, and a picture if possible? Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted February 9, 2018 RMweb Premium Share Posted February 9, 2018 Markits wheels are IND13/07, this is the drawing I sent to Mark for it.wheel.PDF 3'3" diameter, nearest Gibson are 4839G Link to post Share on other sites More sharing options...
JeremyC Posted December 24, 2018 Share Posted December 24, 2018 (edited) Bob. At the moment I don't have the drawing as it has been lent to 'High Level Kits', but the attached photos might be of help. This is the steam brake cylinder on the 14" Barclay that was at Granton Gasworks. Note the piston moves down to apply the brakes, so the brake rods are push rods not pull rods. A close up of the brake arrangement on my Mercian Models 16" Barclay. This was based on the drawing mentioned above. A more general view of the underside of the above model. Apart from the brake cylinder and its lever the brake rigging on both sides is identical. Points to note are that the rod to the rear brake shoe is straight from the crank on the brake shaft to the rear brake hanger. The rod to the front wheel runs from the rear hanger crossbeam, passes behind the rear wheel then steps out to come into line with the bottom of the front brake hanger. There is no cross beam between the front brake hangers. I hope these are of some assistance. Edited December 25, 2018 by JeremyC Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now