1165Valour Posted October 17, 2019 Share Posted October 17, 2019 On 27/01/2018 at 10:02, Killian keane said: Sounds very interesting, I recommend you read the fictitious history of the South British Railway by mr R.R.J. Plummer as published in the Autumn and Winter 1968 editions of trains illustrated Interesting, has this article been reproduced somewhere online, or does it require searching around for a copy? Link to post Share on other sites More sharing options...
Skinnylinny Posted October 19, 2019 Author Share Posted October 19, 2019 On 18/10/2019 at 00:34, GWRSwindon said: Interesting, has this article been reproduced somewhere online, or does it require searching around for a copy? I'm not aware of it being published elsewhere, but the magazines do show up for as little as £1.50 buy it now on eBay. No comment on international postage, though. I might have to have a look at getting hold of copies myself. Today was the first day of the Uckfield show. An excellent show, as per last year. With it being very busy today, I didn't get a chance to get many photos of the layouts, as it was very busy, and amongst my stewarding duties, I spent an hour co-operating Aerodrome Park with Gary (@BlueLightning). However, I did manage to get around some of the stalls, and have walked away with a nice little haul: A copy of Southern Style, Part One: London & South Western Railway, a copy of Private Owner Wagons by Peter Matthews, which has lots of useful drawings as well as notes about private owner operations, a Chatham Kits LCDR 3-plank drop-side open, a Prickly Pear SER 4-plank open and a SE Finecast Billinton brake van. These should keep me busy for a while! 4 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 19, 2019 RMweb Premium Share Posted October 19, 2019 44 minutes ago, Skinnylinny said: I a Prickly Pear SER 4-plank open and a SE Finecast Billinton brake van. Oh dear, I fear I will be following in your footsteps. Do you know if the SEF brake van can easily be adapted to the 4-wheeled version? As far as I can see, the 6 and 4-wheeled vans are virtually identical above the water line, though the 6-wheeler is shown as 2" taller. I missed out on the Prickley Pear SER wagon at Scaleforum as I was out of cash... 1 Link to post Share on other sites More sharing options...
Trade Member BlueLightning Posted October 19, 2019 Trade Member Share Posted October 19, 2019 5 minutes ago, Compound2632 said: Do you know if the SEF brake van can easily be adapted to the 4-wheeled version? Answering for @Skinnylinny as they are currently sat at my workbench building the brake van! The instructions say it can be "converted to a diagram 1568 4 wheel brake by removing the centre axle boxes" and Paul of Prickley Pear was only around as a visitor, although he had a few kits with him allowing Linny to grab one. Gary 2 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 19, 2019 RMweb Premium Share Posted October 19, 2019 (edited) 13 minutes ago, BlueLightning said: The instructions say it can be "converted to a diagram 1568 4 wheel brake by removing the centre axle boxes" Hum... the diagram shows 9'9" wheelbase as against 5'0"+5'0"... I'll look forward for a report on the build! Am I seeing the axleguards/boxes/springs cast as one piece with the solebar? 13 minutes ago, BlueLightning said: and Paul of Prickley Pear was only around as a visitor, although he had a few kits with him allowing Linny to grab one. My wallet escapes again... Edited October 19, 2019 by Compound2632 Link to post Share on other sites More sharing options...
Trade Member BlueLightning Posted October 19, 2019 Trade Member Share Posted October 19, 2019 2 minutes ago, Compound2632 said: Hum... the diagram shows 9'9" wheelbase as against 5'0"+5'0". Just measured the brake van kit, the overall wheelbase is 39mm 1 Link to post Share on other sites More sharing options...
Skinnylinny Posted October 19, 2019 Author Share Posted October 19, 2019 Well, that went surprisingly well - Gary showed me the basics of whitemetal soldering, and a thoroughly pleasant couple of hours later, I was the proud owner of a substanially-complete (it needs couplings, handrails, painting, glazing and the roof adding, plus brake handles for the verandas as the ones in the kit were a bit tall) Billinton brake van. So pleased am I with this kit that I'm going to go back to them tomorrow and buy a bullion van and possibly a set of single bolster wagons from them too! 10 Link to post Share on other sites More sharing options...
drduncan Posted October 20, 2019 Share Posted October 20, 2019 Welcome to the wonderful world of white metal soldering! Duncan 2 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 20, 2019 RMweb Premium Share Posted October 20, 2019 Great to meet you today, Linny, though a blow that SEF had sold out of the Billinton brake van! I consoled myself with a Parry dumb-buffer from the opposite corner of the hall. Can't go to an exhibition and not come way with a wagon kit! 4 Link to post Share on other sites More sharing options...
Skinnylinny Posted October 27, 2019 Author Share Posted October 27, 2019 It was excellent to meet you, too, @Compound2632, as well as @TurboSnail and others. I ended up walking away with a fair few kits: The SEF Billinton brake van, plus a bullion van and a pair of single bolster wagons from them too, a Chatham Kits LCDR 3-planker, a Prickley Pear SER open (as an exchange with another Uckfield club member for two of my 3D-printed wagons. Plus, another few trades have ended up with me having a few resin LSWR van kits, an LSWR cattle van, and a D&S SECR brake van to add to the collection. Modelling time at home is a little limited right now, although I'm waiting to hear back about another flat (still looking to move fairly soon), which I'm hopeful about - this one has space for Linton as planned, plenty of storage, a dishwasher (hurrah!) and is less than a five minute walk from the office, so... I'm trying not to be too hopeful, but still... 5 4 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 3, 2019 Author Share Posted November 3, 2019 (edited) So, good news first: I got the flat! Move-in date is still uncertain, but should know by Tuesday. There's space for Linton as planned (although I may end up mirroring the track plan, we'll have to see), which is good, because when I came back to Scotland from the Uckfield show by train to London and overnight coach, I was bringing something with me that I haven't mentioned yet: Three of Linton's baseboards (the scenic ones, for now, while I work out how to arrange the fiddle yard), which Gary ( @BlueLightning ) very kindly provided. I must admit, the coach driver gave me some funny looks as he loaded them into the luggage compartment, and there are a couple of scuffs to the edges as a result of the journey, but nothing which won't be hidden away at the back, under scenery. It feels kind of weird knowing that I already have the track, and in a week or two I should have somewhere to place the buildings I've build so far... Linton begins? Edited November 3, 2019 by Skinnylinny 9 Link to post Share on other sites More sharing options...
Trade Member BlueLightning Posted November 3, 2019 Trade Member Share Posted November 3, 2019 Yay the baseboards reveal themselves!! Can't wait to see the layout begin to progress!! Gary Link to post Share on other sites More sharing options...
Skinnylinny Posted November 3, 2019 Author Share Posted November 3, 2019 Well, it's only been nearly 70 pages of procrastination planning and preparation! 3 1 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 4, 2019 Author Share Posted November 4, 2019 (edited) Minor update: Move-in date will, in fact, be tomorrow! Given I've not started packing things yet, I'm expecting to take about a month to move during evenings after work. However, the boards, being temporarily located nearby, might actually be one of the first things to move in. Exciting times for the Great Southern Railway. Edited November 4, 2019 by Skinnylinny 6 5 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 10, 2019 Author Share Posted November 10, 2019 (edited) MInor update: Most of the rolling stock has been moved over to the new flat, along with various other bits and pieces. No modelling progress to report, but the new flat features, built-in, what is definitely a workbench. Not quite in frame is the set of four kitchen-style cupboards on the wall above the shelves. Plenty of storage for the kit stash! As can be seen, Linton Station Road is slowly coming along, although I'm not convinced by the station building, and I'll probably build another one... I'm actually quite tempted by one of the old Hornby semi-detached house kits, although I get the feeling I should probably have a small group of similar houses, to represent a few that were built at the same time by the same builder. Would this be likely? I've been discovering just how much rolling stock I've already accumulated for this project (I dare say photos will appear once I've moved in), and, of course, being mainly kitbuilt/bashed, most of it is unboxed, so... lots and lots of delicate wrapping. Also discoveries of long-forgotten projects, including this little 009 Lister Auto Truck, on a Kato Portram motor bogie. A whitemetal body kit, it actually pulls surprisingly well, and runs beautifully smoothly and slowly. It still, strictly speaking, needs the handbrake handle needs replacing with a wheel, rather than the plastic handbrake off a Hornby tender drive tender! Edited November 10, 2019 by Skinnylinny 11 2 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 13, 2019 Author Share Posted November 13, 2019 (edited) Ooops... I may have spent a bit of money that I found in a forgotten-about bank account (which, it must be said, was a very nice surprise!). The postman brought me a nice brown cardboard box to the office this morning. The usual Gibson wheels have been swapped out for Scale Link (self-quartering, Romford-style) ones, and it should do very nicely as a first build to try out the new workbench. I also received messages from two different people, informing me that there was a set of three decently-built PC Models LSWR 48' carriages on eBay, for £40 Buy-It-Now. These have also mysteriously found their way through my PayPal account. They'll need a few finishing touches (one rainstrip is partially missing, and I will probably retro-fit gas lighting), but they'll certainly fill another gap in the carriage roster until I get around to making my own. ...as I say. Whoops! My poor wallet... Edited November 13, 2019 by Skinnylinny 12 1 2 Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted November 14, 2019 RMweb Gold Share Posted November 14, 2019 A forgotten bank account is a wonderful thing. 2 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 14, 2019 Author Share Posted November 14, 2019 In this particular case, yes. Not so much if it's accruing interest on an overdraft! Ever have that feeling you might have bitten off more than you can chew? I know the old adage of "you're only ever sticking two bits together at once" but... The castings are generally lovely and crisp, but I do have to wonder if this was necessarily the best feed point for the dome, especially given that the feed for the chimney was up the threaded rod at the bottom. I've already tried putting it in the smallest lathe we have at the Hacklab, but have had no joy, as the chuck doesn't grip very well at so small a size. Incidentally, there's no nut provided, so I'm not sure why the rod is threaded! 5 5 Link to post Share on other sites More sharing options...
JeremyC Posted November 15, 2019 Share Posted November 15, 2019 (edited) Dome trued up and cast screw machined off. Base drilled, counter-bored and tapped. Mandrel made up and casting feed machined off. Just needs final cleaning up! And your wheels are done as well :-) Edited November 15, 2019 by JeremyC 5 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Regularity Posted November 16, 2019 RMweb Gold Share Posted November 16, 2019 On 14/11/2019 at 10:01, Skinnylinny said: Incidentally, there's no nut provided, so I'm not sure why the rod is threaded! Probably used whilst making the pattern. Link to post Share on other sites More sharing options...
Skinnylinny Posted November 16, 2019 Author Share Posted November 16, 2019 10 minutes ago, Regularity said: Probably used whilst making the pattern. That would make sense, I suppose. Explains why the chimney also has a threaded rod. 12 hours ago, JeremyC said: Dome trued up and cast screw machined off. Base drilled, counter-bored and tapped. Mandrel made up and casting feed machined off. Just needs final cleaning up! And your wheels are done as well :-) That looks brilliant, thanks Jeremy! If anyone's in any doubt about the practical advantages of joining a club (beyond the like-minded company), skill-sharing is definitely one of the advantages. A propos of which, if you fire me those files you were wanting lasered, I'll try to get them cut ready for the next club meeting - I should have time on Monday evening to do a few quick cuts! Link to post Share on other sites More sharing options...
Skinnylinny Posted November 28, 2019 Author Share Posted November 28, 2019 (edited) So a little more work has been done on the Adams Radial, which is now looking very smart (on one side!), needing only the footsteps lined out. I must admit to a fair amount of cursing while trying to align all five bits of lining transfer on each of the toolboxes, but I'm pleased enough with the result. Just needs an identity now! I've also spotted something of interest on eBay - a Triang clerestory which has been rather nicely modified into a twin-coupe. https://www.ebay.co.uk/itm/MUCH-MODIFIED-TRIANG-CLERESTORY-COMPOSITE-COACH/352865993649 This set the gears in my brain turning... I like the idea of a GSR family saloon which could visit other layouts. Ten minutes in Microsoft Paint on a work lunch hour has produced a possibility with fairly minimal carving about of this nicely-modelled carriage. I'd be interested to hear peoples' thoughts. Even if I don't win the auction (which seems likely, as it's a nice model of an unusual type of carriage, even if freelance) there's probably enough of an idea there for me to set about one of the Triang Clerestory Firsts in my stock box... Of course, it would end up in GSR blue/white, possibly fitted with NEM pockets to allow the use of tension locks/Kadees, and also fitted with at least drawhooks to allow use on layouts with scale couplings. Edited November 28, 2019 by Skinnylinny 6 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 28, 2019 RMweb Premium Share Posted November 28, 2019 How come the servants get the end view? How about end saloons, with a service area in the middle? It has something of a Directors' Inspection Saloon about it. Is the Ebay one possibly Highland inspired? 1 1 Link to post Share on other sites More sharing options...
Skinnylinny Posted November 28, 2019 Author Share Posted November 28, 2019 (edited) It does look rather Highland-y, doesn't it? I couldn't figure out how to have a saloon with seats facing the end-view, so I plonked the servants there to allow a half-compartment at the other end for the parents to escape to! I could easily swap those around though, give the parents the nice view and have the servants in the middle, although I'd imagine the end view would be very popular with young boys at the time! Edited November 28, 2019 by Skinnylinny 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 28, 2019 RMweb Premium Share Posted November 28, 2019 Spotters' compartment? When I was very young, I used to be taken from Shrewsbury to Birmingham to see my Gran - first generation DMU, with view through the driver's compartment. I can remember vividly one place where there was a change of gradient under a bridge and it really did look as if the line vanished! Also, I'm told I called Cosford "Moblems" - the windsock was a landmark. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now