letterspider Posted November 11, 2017 Share Posted November 11, 2017 (edited) Following up from a post on Bargain Hunters 2 http://www.rmweb.co.uk/community/index.php?/topic/125236-bargain-hunters-mark-2/page-11&do=findComment&comment=2921303 and here is the link to the ALDI website with a video of the 3D printer in action Edited November 11, 2017 by letterspider Link to post Share on other sites More sharing options...
crazynitwit Posted November 11, 2017 Share Posted November 11, 2017 Where's the link Link to post Share on other sites More sharing options...
RMweb Premium decauville1126 Posted November 11, 2017 RMweb Premium Share Posted November 11, 2017 Where's the link This may help: https://www.aldi.co.uk/3d-printer I shall be watching this thread with interest as it might just help drag me into the new world! Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted November 11, 2017 RMweb Premium Share Posted November 11, 2017 (edited) Frankly, I'd be surprised if they sell any at all without showing any specifications (other than print area)! Edited November 11, 2017 by Kylestrome Link to post Share on other sites More sharing options...
Arthur Posted November 11, 2017 Share Posted November 11, 2017 My experience of tools from ALDI (and Lidl) has always been good so I’ll certainly be very interested. . Link to post Share on other sites More sharing options...
kandc_au Posted November 12, 2017 Share Posted November 12, 2017 Unfortunately mine has been the exact opposite here in Oz! As for the 3d printer putting everything else aside it would only be suitable for small items anyway.Then you have the issue of quality of the print. (How fine it will print) Khris Link to post Share on other sites More sharing options...
The Bigbee Line Posted November 12, 2017 Share Posted November 12, 2017 Small would be ok. What IT skills are needed to program? 1 Link to post Share on other sites More sharing options...
Guest Posted November 12, 2017 Share Posted November 12, 2017 (edited) Frankly, I'd be surprised if they sell any at all without showing any specifications (other than print area)! The Aldi 3D printer's web page does suffer from a distinct lack of specs, but as far as I can tell, it's a clone (or a simple rebadge) of Wanhao's Duplicator i3 PLUS. I'm pretty sure the Aldi offer will sell well. Every time I go in there (or Lidl) I always come out with stuff I never knew I didn't need... I know virtually nothing about 3D printers (apart from the fact that I'd quite like one), so as long as it's not a complete lemon, I'd be very tempted. Obviously there are far better printers available for more money, but I think the question is... is this a decent one for the price? Edit: There's a half-decent "first impressions" review of the Wanhao i3 on YouTube here. Be warned, he does waffle on a bit. Aside from a few screws that worked loose during transit and an issue (fixable) with the bearings on the sliding bed, it seems reasonable. Edited November 12, 2017 by Pete 75C 1 Link to post Share on other sites More sharing options...
RMweb Gold Fen End Pit Posted November 12, 2017 RMweb Gold Share Posted November 12, 2017 Yes, I believe it is a rebadged Wanhao. They did a very similar offer in Oz a few months back. I've had the equivalent Wanhao Duplicator i3 Plus since February and I've been pretty happy with it. Certainly for the price. The limitations have been what I expected from a FDM printer. You can see some of the output on Fen End Pit's blog e.g http://www.rmweb.co.uk/community/index.php?/blog/186/entry-19342-fen-end-pit-3d-printed-u-skip/ David 7 Link to post Share on other sites More sharing options...
Arthur Posted November 12, 2017 Share Posted November 12, 2017 That mine tub looks pretty damn good to me David. Even accepting the need for some surface sanding I’d be very pleased with that from an entry level machine. . Link to post Share on other sites More sharing options...
thegavs Posted November 12, 2017 Share Posted November 12, 2017 It does seem to be a clone of a Wanhao I3 plus, but there is a an ongoing debate as to if the ALDI version has a USB port or not. The version sold in Australia did but the one in the aldi video does not. I have a I3 plus and am very happy with it so am tempted to get the ALDI one as I do need a 2nd printer as I cannot keep up with demand for bits printed on it. Link to post Share on other sites More sharing options...
Guest Posted November 13, 2017 Share Posted November 13, 2017 How "data-heavy" is a file for 3D printing likely to be? Take, for example, a single 4mm DMU cab end or a lineside hut? The Aldi/Wanhao printer has a built-in SD card slot and the cards are relatively cheap. I think I have a couple of 8GB cards and a 16GB card. If we accept that this is at the "budget" end of the market, I can probably live without the USB port. If it does turn out to have one, that would just be a nice bonus. Link to post Share on other sites More sharing options...
RMweb Premium eldavo Posted November 13, 2017 RMweb Premium Share Posted November 13, 2017 The SD card doesn't need to be big. Generally before files for printers are fairly small, a few Mbytes for complex items. Cheers Dave Link to post Share on other sites More sharing options...
rdr Posted November 13, 2017 Share Posted November 13, 2017 (edited) with these clones you either get them with acme leadscrews on the z or threaded rod. It's priced about right for leadscrews, but expensive if not. I bought my i3 prusa clone for £235 but i needed to add a couple of linear bearings to make it accurate. Edited November 13, 2017 by rdr Link to post Share on other sites More sharing options...
simon br blue Posted November 13, 2017 Share Posted November 13, 2017 This looks tempting. The big plus for me would be that it comes ready made with a warranty/ guarantee from Aldi rather than buying something from China off eBay. Link to post Share on other sites More sharing options...
Robin2 Posted November 17, 2017 Share Posted November 17, 2017 I recently bought an Anet A2 3D printer kit on EBay for £156 IIRC - that's half the Aldi price - but you do have to assemble it. ...R Link to post Share on other sites More sharing options...
Titan Posted November 17, 2017 Share Posted November 17, 2017 I recently bought an Anet A2 3D printer kit on EBay for £156 IIRC - that's half the Aldi price - but you do have to assemble it. ...R Like this one? https://www.ebay.co.uk/itm/New-Version-Anet-A8-High-Precision-3D-Printer-DIY-Kits-Free-1-75mm-3D-Filament/112640767279?hash=item1a39e9b52f:g:qe8AAOSwGtRXz-Jd How well does it work? Link to post Share on other sites More sharing options...
Guest Posted November 17, 2017 Share Posted November 17, 2017 I recently bought an Anet A2 3D printer kit on EBay for £156 IIRC - that's half the Aldi price - but you do have to assemble it. Whilst it is nice to take an item out of the box, place two halves together and tighten a couple of bolts, purchasers shouldn't be put off by the home assembly printers. The manufacturer isn't asking you to solder together a PCB. All the components just need to be connected together, like simple flat-pack. The problem is often that the assembly instructions (if included) can be a little vague (that's being polite). It should be noted that even the Aldi printer (which comes in just two pieces) still requires the purchaser to level the sliding bed. That can be tricky, but it will affect the 3D print if a little out of alignment. I guess, as with most things, care taken at the assembly stage pays dividends during use. Link to post Share on other sites More sharing options...
Robin2 Posted November 17, 2017 Share Posted November 17, 2017 Like this one? Your link is to an A8 whereas mine is an A2 which (despite the numbers) is the newer model. The frame of the A2 is all extruded aluminium whereas the A8 uses acrylic with metal slide bars. I have very limited experience of using mine. As far as I can tell it works well. There are lots of online reviews, especially on YouTube I have no idea how impartial they may be. Make up your own mind. I found this review interesting. The A2 is very like the Tevo Tarantula. ...R Link to post Share on other sites More sharing options...
Robin2 Posted November 17, 2017 Share Posted November 17, 2017 That can be tricky, but it will affect the 3D print if a little out of alignment. I guess, as with most things, care taken at the assembly stage pays dividends during use. After I had built my Anet A2 I discovered I had assembled the X-axis not quite horizontal. Not realizing the problem I was able to compensate with the alignment of the bed and it was only when I made a new shelf as the home for the printer and looked at it from a distance that I saw the error. It meant dismantling half of it to fix it but it was not otherwise a problem. I have levelled the bed using a piece cut from page of printer paper as a feeler gauge. Seems to work well. But make sure there is no hard (cold) plastic extruded from the nozzle or the height will be wrong. I have a free Python program called pronterface.py that allows me to control it from my PC. Much easier than fiddling with the knob on the LCD screen. ...R Link to post Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted November 19, 2017 RMweb Premium Share Posted November 19, 2017 Just had a look and the printer is now available to order on the Aldi website. The spec info is as below. Seriously thinking of getting one. Does anything below ring alarm bells? Features Print Technology: Fused Filament Fabrication (FFF) Build volume – 200 x 200 x 180mm Layer resolution: 0.1-0.4mm Positioning accuracy – X 0.012mm, Y 0.012mm, Z 0.004mm Single 0.4mm extruder Print Speed – 10-70mm/s Travel Speed – 10-70mm/s Supported Print Materials: PLA, ABS, PVA, HIPS, PLA Wood, PLA Flex, Conductive Ambient Operating Temperature: 15°C – 30°C Operational Extruder Temperature: 170°C - 260°C Operational Print Bed Temperature: 30°C - 110°C Slicer Software: Cura Cura Input Formats: STL, OBJ, DAE, AMF Cura Output Format: GCODE Connectivity: SD Card (Expert users only) Input Rating: 100-240V AC, 50/60Hz, 3.5A, 350W Minimal assembly and setup Intuitive touchscreen controls and step by step wizards to guide you through setup Sturdy steel frame prevents wobbling Heated bed and extruder work in unison to ensure your prints are as clean and sharp as possible New Levelling Wizard steps you through levelling the bed Fully enclosed power supply built into the base Large build area to print models up to 20 x 20 x 18cm Print directly from SD cards Works with common 3D model files Guarantee/Warranty Free 1 year warranty Ideal For Printing your own prototypes, crafts, decorations, toys and more Cartridges: 1 x 100 metres PLA filament included Copier: Intuitive Touch Controls and LCD screen Dimensions: 400 x 410 x 400mm (assembled) Double Sided Printing: Cura Input Formats: STL, OBJ, DAE, AMF Paper Size: Build volume: 200 x 200 x 180mm Printing Speed: 10-70mm/s Product Type: Printers and Home Office Equipment Scanner: Levelling Wizard steps you through levelling the bed Screen Type: Touchscreen LED Software Included: Cura System Requirements: Fully enclosed power supply built into the base Link to post Share on other sites More sharing options...
RMweb Premium eldavo Posted November 19, 2017 RMweb Premium Share Posted November 19, 2017 Looks like fairly standard specs for a Prusa i3 design. Looks a bit more sturdy than some of the cheaper options. Cheers Dave Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted November 19, 2017 RMweb Gold Share Posted November 19, 2017 In for a penny as it were, delivery after Thursday next week discovered earlier in the week that an Xbox Kinect camera can be used as a 3d scanner, managed to get one from cash generator yesterday for £6, just waiting on a power supply from amazon to arrive to give it a go, I bought a 2nd hand gaming computer a couple of years back (I’m not a gamer though!) and apparently the high spec graphics card I have in it will run the Kinect as a scanner without issue (some slower cards will not run t as it freezes or goes blocky) I’m looking forward to seeing what I can do with it and the printer together, I’ve downloaded the free ‘reconstructme’ software to the computer which has options for the Kinect in the ‘available scanners’ section, just need to download the drivers for it My 13rd old can give me a crash course in 3D CAD modelling/ design as he does that in school in technology lessons 3 Link to post Share on other sites More sharing options...
BG John Posted November 19, 2017 Share Posted November 19, 2017 "Connectivity: SD Card (Expert users only)" No USB connection? What do they mean by expert users only? Surely they are being sold for use by beginners. Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted November 19, 2017 RMweb Gold Share Posted November 19, 2017 I did read somewhere it has a usb connection, I think some of the problem is they have used a generic ‘printer template’ for their listing as it includes things like paper capacity and pages per minute etc Noticed the Aldi site has gone down at the mo Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now