RMweb Gold BoD Posted September 19, 2020 Author RMweb Gold Share Posted September 19, 2020 I forgot to say ..... kudos to Digitrains, Hattons and Royal Mail. I only decided to go for this yesterday, ordered after lunch and they arrived before ten this morning. 3 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted October 15, 2020 Author RMweb Gold Share Posted October 15, 2020 I have been pottering about with those Parkside kits when I have had time over the last few days. The one on the right is RTR Bachmann. They scrub up quite well ...... I must close those coupling loops and fettle that buffer on the next wagon. I can still feel that distillery train coming on. Just need to decide on a suitable name for the loco. A new name plate and number will be created on the computer and printed out on decal paper. It will have to be fictitious - have you seen how complicated the font is on the Dailuaine distillery 'puggy'? I tried to create it and got nowhere near. 13 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 4, 2020 Author RMweb Gold Share Posted December 4, 2020 I have been working on the contours and scenery of late moving away from a 'flat earth' appearance, much more of which later. However, for various reasons, I have not been up in the loft this week and so started to think about some of the rolling stock. Over the years I had acquired some of the Bachmann large logo 37/4s, far from perfect models I know but needs must. This week I finished fitting them with sound decoders and speakers and also looked at changing some identities. The printed numbers proved particularly stubborn to remove. At the same time I decided to do the West Highland Terrier logos too, as Bachmann's effort is pretty poor. These became ...... .... and no I'm not working toward a full house. There is an original in the background which will remain as 37408. Its off for a spray of varnish and then onto weathering and detailing. 7 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted December 4, 2020 RMweb Premium Share Posted December 4, 2020 (edited) BoD, are you hoping that if you leave them like that overnight they may multiply on their own? Baz (nice locos by the way!) Edited December 4, 2020 by Barry O english grammaticals! 5 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 4, 2020 Author RMweb Gold Share Posted December 4, 2020 4 hours ago, Barry O said: are you hoping that if you leave them like that overnight they may multiply on their own? Fat chance. I’ve been trying to breed them for years without success. 3 1 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 7, 2020 Author RMweb Gold Share Posted December 7, 2020 I have just been doing a couple more 'Westies'. Here is the Bachmann original and as I said earlier, in my opinion, it's not the best. ..... and the replacement from the Railtec Transfers set. Well worth the effort I think. 5 3 1 Link to post Share on other sites More sharing options...
RMweb Gold Regularity Posted December 7, 2020 RMweb Gold Share Posted December 7, 2020 1 hour ago, BoD said: Well worth the effort I think. Yes. The original was more than a little ruff... 4 1 Link to post Share on other sites More sharing options...
RMweb Gold PeterBB Posted December 7, 2020 RMweb Gold Share Posted December 7, 2020 O where is the groan button! 1 1 Link to post Share on other sites More sharing options...
saxokid Posted December 7, 2020 Share Posted December 7, 2020 Great work Peter Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 8, 2020 Author RMweb Gold Share Posted December 8, 2020 Oh, several rude words. I was just about to renumber a loco to 37026 Loch Awe when I had one final check of the photos and noticed the donor loco has the wrong nose end. It has round buffers and the skirt around the buffers whereas 37026 doesn't. Why couldn't they keep things simple? A suitable loco would be 37051 but it doesn't have a name or those pretty little doggies on the side. Do I do Loch Awe and know in my own mind that it is wrong or go for a work-a-day 37051? Decisions, decisions. 1 1 1 Link to post Share on other sites More sharing options...
D6775 Posted December 8, 2020 Share Posted December 8, 2020 37111 is an option with Westies, but has plated headcode boxes which may not help! 1 1 1 Link to post Share on other sites More sharing options...
mallaig1983 Posted December 12, 2020 Share Posted December 12, 2020 Personally I'd go for 051 :-) 2 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 12, 2020 Author RMweb Gold Share Posted December 12, 2020 (edited) 1 hour ago, mallaig1983 said: Personally I'd go for 051 :-) Great minds ....... Another 37 I had lying around is set to become 37178. There seems to be less choice for centre headcode versions. But for that I need to acquire/make a car headlight style lamp for the front of that one. Anyone know of anyone who makes them in 4mm? Edited December 12, 2020 by BoD 2 1 Link to post Share on other sites More sharing options...
mallaig1983 Posted December 12, 2020 Share Posted December 12, 2020 Great minds indeed 2 1 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 12, 2020 Author RMweb Gold Share Posted December 12, 2020 1 hour ago, mallaig1983 said: Great minds indeed I suppose modelling the same area will increase the chances of that happening, but even so........ However, that leaves me with a pair of etched Loch Awe nameplates looking for a home. I will pop them in the post if anyone needs them otherwise I will just keep my eyes peeled and wait for a suitable loco to come along. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold young37215 Posted December 12, 2020 RMweb Gold Share Posted December 12, 2020 They get everywhere don’t they? In addition to the headlight, 178 needs a pair of brackets located above the head code panel which I believe were WR fitted for name boards. Not sure how I will model this yet. There are several people on RMWEB who supply and fit headlights but I haven’t used any of them so can’t comment on their quality. 3 Link to post Share on other sites More sharing options...
mallaig1983 Posted December 12, 2020 Share Posted December 12, 2020 1 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 13, 2020 Author RMweb Gold Share Posted December 13, 2020 20 hours ago, young37215 said: In addition to the headlight, 178 needs a pair of brackets located above the head code panel which I believe were WR fitted for name boards. Not sure how I will model this yet. Interesting point. Looking at Scottish Class 37s Vol 1 190 and 191 had those fitted too. I've just spotted in the photo in that book that, more noticeably, 178 has a couple of extra angle brackets directly above the red tail lights in line with the bottom of the head code panel. They are not the standard lamp brackets either. Looking at others they seem a right mish mash of combinations of these without rhyme or reason. Why couldn't they make them all the same, eh? 1 Link to post Share on other sites More sharing options...
37Oban Posted December 13, 2020 Share Posted December 13, 2020 58 minutes ago, BoD said: Interesting point. Looking at Scottish Class 37s Vol 1 190 and 191 had those fitted too. I've just spotted in the photo in that book that, more noticeably, 178 has a couple of extra angle brackets directly above the red tail lights in line with the bottom of the head code panel. They are not the standard lamp brackets either. Looking at others they seem a right mish mash of combinations of these without rhyme or reason. Why couldn't they make them all the same, eh? They did it to keep future model-makers on their toes and confuse rivet counters! Roja 2 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 14, 2020 Author RMweb Gold Share Posted December 14, 2020 (edited) 22 hours ago, 37Oban said: They did it to keep future model-makers on their toes and confuse rivet counters! Roja They are certainly keeping me on my toes. Funnily, there is no way I would consider myself a 'rivet counter*' or a perfectionist but once I have spotted that something is wrong I find it hard to 'unsee' or ignore. Which is a bit of a contradiction when you consider that, for the majority of us, the whole thing is full of compromises anyway. *although I have been known to count bricks! Edited December 14, 2020 by BoD 1 2 2 Link to post Share on other sites More sharing options...
mallaig1983 Posted December 15, 2020 Share Posted December 15, 2020 That's what I've found too. Once seen can't be unseen. 37 112 had buffer beam cowels until 83 when they were cut back but still retaining the round buffers. Mine has cowels and I can't unsee it in 1983 guise. So 37 049 will become 37 112 and 37 112 will become 37 039. If anyone wants to point out roof rivet detail please keep it zipped, I can't take any more Andy 3 Link to post Share on other sites More sharing options...
RMweb Premium 03060 Posted December 15, 2020 RMweb Premium Share Posted December 15, 2020 6 hours ago, mallaig1983 said: So 37 049 will become 37 112 and 37 112 will become 37 039. If anyone wants to point out roof rivet detail please keep it zipped, I can't take any more Andy You'd better not look at Young37215's WHL V.4 topic for a while then as I've just posted something regarding 37 039 ! Apologies in advance, Ian. 1 1 Link to post Share on other sites More sharing options...
mallaig1983 Posted December 15, 2020 Share Posted December 15, 2020 I've just had a look at WHL4 and you are correct in what you have found. I was expecting to model 039 with yellow plated boxes. Some nice footage of it in this condition on DTV's Class 37 tribute vol 1 dvd filmed in 1984. My 37112 is constructed from a body shell from eBay. I bought an EWS liveried split box example to provide the chassis and headcode box plates. I could use that body on the chassis from 37 410 (I won't use this loco regularly anyway) but I find myself short of a set of headcode plates. Plus I need to find someone who does resprays or get myself an airbrush next year. I'm also keeping my fingers crossed that Accurascale release some RSH examples as I need a couple of these (081 and 085). Andy 3 Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted December 21, 2020 Author RMweb Gold Share Posted December 21, 2020 I must not buy Loch Awe.... I must not buy Loch Awe ...... Ok, Ive got the will power of a whelk. With thanks to Rob @young37215 for the heads up sourcing it. 1 1 2 3 Link to post Share on other sites More sharing options...
RMweb Gold PeterBB Posted December 21, 2020 RMweb Gold Share Posted December 21, 2020 Loch Awe - Thanks for triggering a memory. As a student I was up in Scotland relatively frequently and remember when passing by what is now the Loch Awe scene it was just a very narrow, not much wider than single track road and therefore observed its construction and viewing. The same happened in North Wales a number of years later. Apologies for going off track. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now