piranha230 Posted October 1, 2017 Share Posted October 1, 2017 I wish to announce the following 00 gauge new emu kits are available on Ebay class 507,508,313,314,315, class 455/7 trailer coach. The parts are 3d designed from official br drawings and cast in grey resin, I have made them available as individual part's so that its easier than buying a full kit in one go and it helps me spread the cost of the 3d design and printing. The 3d masters are made out of high definition crystal acrylic which gives them a very good finish. Each full bodyside comes as 3 pieces which join with a tab behind the middle of the double door's, the cab end is a full cab end excluding the floor, each rear end is the same with the corridor connection. These parts are currently available on Ebay, I am having a one week sale. Driving coach bodyside left and right class 507-315. £13.99 normally £17.99 with all other parts discounted for one week. Driving coach roof for the above. Cab end and coach rears class 507-315. Trailer coach roof class 507,508,315,455/7. Trailer coach bodyside left or right (fits both sides) class 507,508,315,455/7. Pantograph coach bodyside left and right class 314,315. The class 313,314,315 pantograph coach roof and the side for the class 313 and modified rear end panto side has finished being designed, I am waiting on them 3d printing the masters for these. After these the etched window frames are being done, then finally the floors, bogies and underframe components. 3 Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted October 1, 2017 RMweb Gold Share Posted October 1, 2017 Just had a look on eBay and I'm very tempted by the 507/508 bits, works out about £140 for a full 3 car set by my maths which is not too bad when you compare it to 'other' kits available that don't look anywhere near as detailed Hope you do well with them Link to post Share on other sites More sharing options...
Gordon H Posted October 1, 2017 Share Posted October 1, 2017 What adhesive is used to assemble the parts? Link to post Share on other sites More sharing options...
black and decker boy Posted October 1, 2017 Share Posted October 1, 2017 The cabs certainly look nice and have some finesse. Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted October 1, 2017 RMweb Premium Share Posted October 1, 2017 I wish to announce the following 00 gauge new emu kits are available on Ebay class 507,508,313,314,315, class 455/7 trailer coach. The parts are 3d designed from official br drawings and cast in grey resin, I have made them available as individual part's so that its easier than buying a full kit in one go and it helps me spread the cost of the 3d design and printing. The 3d masters are made out of high definition crystal acrylic which gives them a very good finish. Each full bodyside comes as 3 pieces which join with a tab behind the middle of the double door's, the cab end is a full cab end excluding the floor, each rear end is the same with the corridor connection. These parts are currently available on Ebay, I am having a one week sale. Driving coach bodyside left and right class 507-315. £13.99 normally £17.99 with all other parts discounted for one week. Driving coach roof for the above. Cab end and coach rears class 507-315. Trailer coach roof class 507,508,315,455/7. Trailer coach bodyside left or right (fits both sides) class 507,508,315,455/7. Pantograph coach bodyside left and right class 314,315. The class 313,314,315 pantograph coach roof and the side for the class 313 and modified rear end panto side has finished being designed, I am waiting on them 3d printing the masters for these. After these the etched window frames are being done, then finally the floors, bogies and underframe components. Might I suggest that a few links might generate more sales? Regards, John Isherwood. Link to post Share on other sites More sharing options...
Kelly Posted October 1, 2017 Share Posted October 1, 2017 The parts mentioned above are available to buy on eBay via the following link. I had one of the cabs (all I've managed to order as yet) on the DEMU stand with me at Scalefourum, and it got a reasonable amount of interest and positive comments. (it should be noted there is also 442 and 309 parts listed there). Link to post Share on other sites More sharing options...
piranha230 Posted October 2, 2017 Author Share Posted October 2, 2017 What adhesive is used to assemble the parts? Hi Gordon, Only superglue would be good. Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted October 2, 2017 RMweb Premium Share Posted October 2, 2017 (edited) Hi Gordon, Only superglue would be good. Would epoxy not work with resin? ... asking for a friend Edited October 2, 2017 by Tim Dubya Link to post Share on other sites More sharing options...
Gordon H Posted October 2, 2017 Share Posted October 2, 2017 It all depends on what resin is being used, hence my original query. When I used polyester resin for my own 508 nearly 20 years ago, I found that the resin itself was the best adhesive. Other resins I have tried since do not seem to stick together so well using the same principle. Link to post Share on other sites More sharing options...
piranha230 Posted October 2, 2017 Author Share Posted October 2, 2017 Might I suggest that a few links might generate more sales? Regards, John Isherwood. That would be good, thanks John. Link to post Share on other sites More sharing options...
piranha230 Posted October 2, 2017 Author Share Posted October 2, 2017 It all depends on what resin is being used, hence my original query. When I used polyester resin for my own 508 nearly 20 years ago, I found that the resin itself was the best adhesive. Other resins I have tried since do not seem to stick together so well using the same principle. It as all polyurethane resin now, I have the parts cast in grey resin ( usually used on model aircraft cast resin parts), as it looks better than normal coloured resin, I know it does not stick to itself, the only thing that sticks it together properly is superglue, I use the Asda branded twin pack liquid superglue its only about a pound but is very good stuff, they also do a gel version that's £1.75 for a twin pack but its on offer for a pound sometimes. Would epoxy not work with resin? ... asking for a friend Only superglue. Link to post Share on other sites More sharing options...
RMweb Premium amwells Posted October 2, 2017 RMweb Premium Share Posted October 2, 2017 Just had a look on eBay and I'm very tempted by the 507/508 bits, works out about £140 for a full 3 car set by my maths which is not too bad when you compare it to 'other' kits available that don't look anywhere near as detailed Hope you do well with them Not sure on the maths... I added the following to a basket to see whether doing a 313 is in my price range: 2 driving ends 3 corridor ends (need 4 but as noted the pantograph end is not yet available) 6 sides (two would be wrong as the 313 panto sides not yet available) 2 driving car roofs (again panto roof not yet available) With the one week sale that came to £163.87. Adding the required corridor end, extra roof plus floors, under frame detail and before getting to paint, pantograph, motor, interior etc etc, looking at well over £200 I'm not complaining, just making sure that nobody thinks £140 will get you a three car set! Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted October 2, 2017 RMweb Gold Share Posted October 2, 2017 Not sure on the maths... I added the following to a basket to see whether doing a 313 is in my price range: 2 driving ends 3 corridor ends (need 4 but as noted the pantograph end is not yet available) 6 sides (two would be wrong as the 313 panto sides not yet available) 2 driving car roofs (again panto roof not yet available) With the one week sale that came to £163.87. Adding the required corridor end, extra roof plus floors, under frame detail and before getting to paint, pantograph, motor, interior etc etc, looking at well over £200 I'm not complaining, just making sure that nobody thinks £140 will get you a three car set! Cheers, as I said it was a top of my head calculation' Still £200+ is fairly decent when you think that another kit manufacturer is offering the ex MTK 508 kit for £240 sans power unit and bogies etc (although i think it's on sale at the moment) Would a Bachmann class 150 drive and dummy chassis be suitable I wonder? Link to post Share on other sites More sharing options...
RMweb Premium Welly Posted October 3, 2017 RMweb Premium Share Posted October 3, 2017 I have just ordered some sides and ends for a 313. Link to post Share on other sites More sharing options...
piranha230 Posted October 3, 2017 Author Share Posted October 3, 2017 Cheers, as I said it was a top of my head calculation' Still £200+ is fairly decent when you think that another kit manufacturer is offering the ex MTK 508 kit for £240 sans power unit and bogies etc (although i think it's on sale at the moment) Would a Bachmann class 150 drive and dummy chassis be suitable I wonder? The best way to power it is a new style Hornby motor, as used on the class 153/156. Link to post Share on other sites More sharing options...
piranha230 Posted October 12, 2017 Author Share Posted October 12, 2017 I have decided to extend the Ebay sale prices for a week or two longer. Link to post Share on other sites More sharing options...
piranha230 Posted November 6, 2017 Author Share Posted November 6, 2017 Driving coach primed in grey alclad primer, almost ready for a coat of BR blue and grey. 7 Link to post Share on other sites More sharing options...
RMweb Premium Welly Posted November 18, 2017 RMweb Premium Share Posted November 18, 2017 Just ordered the pantograph coach sides for the 313 but was a bit disappointed that the ends and the roof are not yet available. Link to post Share on other sites More sharing options...
piranha230 Posted January 25, 2018 Author Share Posted January 25, 2018 Class 313,314,315 pantograph coach modified rear end is now available on Ebay, panto coach roof will be available in the next fortnight. Only one of these is needed per class 313,314,315. I have had a big delay in getting the latest parts designed as I have changed my 3d designer. The next parts I am having done are the floors bogies and underframe components. Link to post Share on other sites More sharing options...
Pete the Elaner Posted January 25, 2018 Share Posted January 25, 2018 Thanks for the update. I was beginning to wonder if I had missed some components. Link to post Share on other sites More sharing options...
piranha230 Posted February 4, 2018 Author Share Posted February 4, 2018 Thanks for the update. I was beginning to wonder if I had missed some components. Pantograph coach roof now available on Ebay. 1 Link to post Share on other sites More sharing options...
Kelly Posted February 19, 2018 Share Posted February 19, 2018 Was going to look at ordering some parts and noticed that there are no longer any listed? Link to post Share on other sites More sharing options...
NickL2008 Posted February 19, 2018 Share Posted February 19, 2018 Was going to look at ordering some parts and noticed that there are no longer any listed? Hi Kelly, Theyre still on there for some reason Ebay isn't displaying them, just had a look, there's still 3 cabs available apprently HTH NL Link to post Share on other sites More sharing options...
Kelly Posted February 19, 2018 Share Posted February 19, 2018 Hi Kelly, Theyre still on there for some reason Ebay isn't displaying them, just had a look, there's still 3 cabs available apprently HTH NL Yes, after posting I looked at finished auctions and it shows items as available, but not in the seller's items.a weird eBay glitch I guess. Link to post Share on other sites More sharing options...
Kelly Posted September 10, 2018 Share Posted September 10, 2018 Seems that these are no longer available as the ebay user now shows as no longer registered? a shame if so as I was part way through getting parts for a 508 and 5WES. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now