lochlongside Posted September 24, 2017 Share Posted September 24, 2017 (edited) A bit late for me to act on (I went to Scaleforum yesterday) and apologies if this has actually been noted elsewhere but I haven't seen any comment on the following - copied off Cambrian website Exhibitions: Scaleforum – this will be the last show we will attend as Cambrian Models. ♦ ♦ ♦ Please note that we intend to semi-retire about the end of September 2017 (after 44 years). ♦ ♦ ♦We are selling the 4mm & 16mm moulding part of the business as a going concern.We will retain the 3D printed products and continue to sell electrical parts & Speed Controllers, and trade under a new name. I would like to thank the current owners in particular for the provision of all those engineering and modern freight wagon kits, types of which are really only now being taken on by the big manufacturers. I have certainly appreciated them. Hopefully the sale of the business will be a success - and thank goodness I have a (too small) reserve of them still to complete - I only wish I had bought more. 09.12.2017 Topic title changed to reflect reality from Cambrian Models - Current Owners retiring -4mm business for sale To Cambrian Models - Ownership change Autumn 2017 Edited December 9, 2017 by lochlongside Link to post Share on other sites More sharing options...
cheesysmith Posted September 26, 2017 Share Posted September 26, 2017 This has been posted on their website for a while now. I just hope the new owners continue to improve and expand the range. I would like to see the one piece bogies extending (FTB6 & bogie tank wagon bogies, hint hint). Link to post Share on other sites More sharing options...
Kelly Posted September 26, 2017 Share Posted September 26, 2017 A buyer has been found for the 4mm and NG ranges according to update posted to the DEMU forum. Not an existing trader, but a new entrant apparantly. 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted September 26, 2017 Share Posted September 26, 2017 From the website We are in the process of transferring Cambrian Models to a new owner.This is planned to be in late October. More details to follow.We are not currently able to accept any more orders for our 4mm Scale range; or for 16mm Scale moulded items – with prefixes NA, NB, NS & NW.3D printed parts, gears, motors and electrical/electronic components can still be ordered.After the transfer of Cambrian Models, we will continue to sell these items, but using a new business name. Jason Link to post Share on other sites More sharing options...
autocoach Posted September 26, 2017 Share Posted September 26, 2017 (edited) There goes my hope for the LSWR "New" Brake van to D1543 in 2017. Hope buyer will not be another Coopercraft. My best wishes to the owners on retirement. I certainly have enjoyed assembling their kits over the years. Edited September 26, 2017 by autocoach Link to post Share on other sites More sharing options...
Daniel W Posted September 27, 2017 Share Posted September 27, 2017 Bit of a shame that the LMS RoadStone Wagon will remain unfinished, but good to hear that they have found a new owner for the range. As has been said above and will no doubt be said below too, let us hope this doesn't turn into another Coopercraft! Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 27, 2017 RMweb Premium Share Posted September 27, 2017 I am after some bogie rail wagons, do I get them from Cambrian or wait for new owners? Link to post Share on other sites More sharing options...
Fat Controller Posted September 27, 2017 Share Posted September 27, 2017 I am after some bogie rail wagons, do I get them from Cambrian or wait for new owners? I'd get them from Cambrian now; it's less stock for the changeover stock-take. Link to post Share on other sites More sharing options...
Kelly Posted September 27, 2017 Share Posted September 27, 2017 I am after some bogie rail wagons, do I get them from Cambrian or wait for new owners? It seems you cannot order from them atm, until the changeover is completed. No idea if they intend to take their stand to other shows in the meantime. However, there should be stock available online from other traders (including eBay). Link to post Share on other sites More sharing options...
cheesysmith Posted September 30, 2017 Share Posted September 30, 2017 I, like most people wish the old owner all the best, and wonder what the new owners will do with what they have bought. Will we see the present range just continue without change? Will we see the gradual improvement of the kits, as already been happening? Will we have another cooper craft disappearing act? For myself, I hope we will see the present range used as a base to expand. Improvements. Well, I would like to see the one piece bogies continue to expand, to include the FTB6 and some others they have not made. New models? Well, how about the various big box wagons built on recovered bogie tank under frames? These are a big choice of prototypes that nobody does yet. And the bogies and under frame bits could be sold as spares for detailing the old Hornby model. Or how about taking on the RTR market. They already have the bogies, how about a model of the HTA? With the Bachmann RTR model heading for £40, I think there would be a market for a kit for £10. Or looking at the prices of hornbys wagons, how about a kit for the coal fish, with the under frame as a spare to replace the old HAA. Or with the price of hornbys HAA wagons, how about a kit of them which does actually get the shape right? I await the outcome of this with much interest. I also hope the new owners all the best, and await their announcements as to where the range is heading with interest. 2 Link to post Share on other sites More sharing options...
Kelly Posted September 30, 2017 Share Posted September 30, 2017 It would be better if the bogies weren't one piece in some respects (particularly for P4 modellers). I'm hopeful the range continues to do well, so many kits in the range are not likely to be produced ready to run and their loss would be a big shame. Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted September 30, 2017 RMweb Gold Share Posted September 30, 2017 It would be better if the bogies weren't one piece in some respects (particularly for P4 modellers). I'm hopeful the range continues to do well, so many kits in the range are not likely to be produced ready to run and their loss would be a big shame. As some 90% of modellers will be thankful for one piece uncompensated bogies to simplify kit building, I'm sure the rest of us can manage to cut off the sideframes and thin them down to fit etches. It was a good move IMHO. Mike. Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 30, 2017 RMweb Premium Share Posted September 30, 2017 Ebay searched, wagons to follow Sorry to say I only have about 30 of theirs I have met them though on a few occasions, I didn't think they were old enough to retire! Link to post Share on other sites More sharing options...
SRman Posted October 1, 2017 Share Posted October 1, 2017 I have had nothing but helpfulness and support from Barry, the retiring owner, and wish him well for the future. I hope the same level of service will continue under the new ownership. 1 Link to post Share on other sites More sharing options...
Poor Old Bruce Posted October 1, 2017 Share Posted October 1, 2017 It seems you cannot order from them atm, until the changeover is completed. No idea if they intend to take their stand to other shows in the meantime. However, there should be stock available online from other traders (including eBay). Just Google "H&A models". Satisfied customer. 2 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted October 1, 2017 RMweb Premium Share Posted October 1, 2017 Just Google "H&A models". Satisfied customer. WOW! They have a rather comprehensive range of stock, I look forward to them bankrupting me in the months to come Link to post Share on other sites More sharing options...
Horsetan Posted October 1, 2017 Share Posted October 1, 2017 WOW! They have a rather comprehensive range of stock, ... They won't once the panic-buying starts. Link to post Share on other sites More sharing options...
davefromacrossthepond Posted October 1, 2017 Share Posted October 1, 2017 Just Google "H&A models". Satisfied customer. Bruce, Thanks for the info. Just ordered 3 Cambrian SR Brake Vans from H&A. Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted October 1, 2017 RMweb Gold Share Posted October 1, 2017 Just Google "H&A models". Satisfied customer. I'm also a satisfied customer so this is an unashamed plug for H&A. They also attend our Biggleswade show in Feb as traders. Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted October 2, 2017 RMweb Premium Share Posted October 2, 2017 They won't once the panic-buying starts. Hmmm - how long before the ebay chancers get in on the act? Cheers, Mick Link to post Share on other sites More sharing options...
Miss Prism Posted October 3, 2017 Share Posted October 3, 2017 I nabbed one of the new LSWR 10T box vans from Peters Spares, who seem to have a good stock of Cambrian kits. (H&A were out of stock of that particular vehicle.) 1 Link to post Share on other sites More sharing options...
autocoach Posted October 3, 2017 Share Posted October 3, 2017 Still no identity for the new owner? Will the new owner have website ordering or deal through retailers with websites? Will the new owners have a different insurance company that allows sales to litigious North America? Link to post Share on other sites More sharing options...
Kelly Posted October 3, 2017 Share Posted October 3, 2017 Still no identity for the new owner? Will the new owner have website ordering or deal through retailers with websites? Will the new owners have a different insurance company that allows sales to litigious North America? I would expect that the new owner will want to keep quiet until the sale and transfer is complete. This is how things were handled when c&l changed hands. Hopefully show attendance and website ordering will continue. But if kits are provided to other retailers then that somewhat reduces the need for Web ordering. Link to post Share on other sites More sharing options...
davefromacrossthepond Posted October 10, 2017 Share Posted October 10, 2017 Bruce, Thanks for the info. Just ordered 3 Cambrian SR Brake Vans from H&A. Just wanted to close the loop on my earlier post. I did receive my order from H&A today. I have to say that I am very impressed with the speed at which H&A shipped out my order (yesterday was a holiday here in the U.S. and but for that and the Sunday, I believe it would have arrived even earlier.). Moreover, I think H&A overseas shipping charge was entirely reasonable. Overall, I am a very satisfied customer (no ties, just very happy buyer) and look forward to buying from H&A again. Dave Link to post Share on other sites More sharing options...
Andrea Posted October 11, 2017 Share Posted October 11, 2017 (edited) Just wanted to close the loop on my earlier post. I did receive my order from H&A today. I have to say that I am very impressed with the speed at which H&A shipped out my order (yesterday was a holiday here in the U.S. and but for that and the Sunday, I believe it would have arrived even earlier.). Moreover, I think H&A overseas shipping charge was entirely reasonable. Overall, I am a very satisfied customer (no ties, just very happy buyer) and look forward to buying from H&A again. Dave We have just received our last order from Cambrian Models and are waiting for info from Barry on who the new owner is. Harry & Andrea Edited October 11, 2017 by Andrea Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now