KeithHC Posted October 31, 2019 Share Posted October 31, 2019 If you wanted an example of a shed with an air of Central and Eastern section and felt like coming to the end of steam how about Redhill. Also Britannia her self had a brief sojourn there on its way to Brighton(Preston Park) for preservation in the national collection. In my Mothers house somewhere there is a photo of me standing on the front of the loco whilst it was standing outside of the shed. Keith 1 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted October 31, 2019 Share Posted October 31, 2019 8 hours ago, Jack P said: ...I can't figure out what you mean about the chimney, do you mean replacing it entirely? If so where would I go about sourcing the replacement from?... Nothing new required. Look at a photo of a real Brit, and there is a rim around the chimney that comes to a pretty sharp edge. Hornby represent it very blunt on this model. In my experience to date this rim is just a push fit over the plain cylinder of the chimney moulding, so easy to remove, modify and replace. (If it is cemented on, then no easy mod, and since it belongs to someone else probably best left alone.) Link to post Share on other sites More sharing options...
Denbridge Posted October 31, 2019 Share Posted October 31, 2019 1 hour ago, KeithHC said: If you wanted an example of a shed with an air of Central and Eastern section and felt like coming to the end of steam how about Redhill. Also Britannia her self had a brief sojourn there on its way to Brighton(Preston Park) for preservation in the national collection. In my Mothers house somewhere there is a photo of me standing on the front of the loco whilst it was standing outside of the shed. Keith Brittania was at Redhill after she was dropped from the National Collection and evicted from Preston Park. I only know, because a friend of the family took me to see her. It was from Redhill that she was bought for private preservation. 1 1 Link to post Share on other sites More sharing options...
Jack P Posted November 3, 2019 Author Share Posted November 3, 2019 On 31/10/2019 at 22:34, 34theletterbetweenB&D said: Nothing new required. Look at a photo of a real Brit, and there is a rim around the chimney that comes to a pretty sharp edge. Hornby represent it very blunt on this model. In my experience to date this rim is just a push fit over the plain cylinder of the chimney moulding, so easy to remove, modify and replace. (If it is cemented on, then no easy mod, and since it belongs to someone else probably best left alone.) I see what you mean. I managed to get the part off - but I thought I better leave it, nothing worse than botching something up when it's not yours! She has a few little touches left to go, but on the whole the project is complete! It's not perfect, but I would argue nothing really ever is, my mate is happy, and that's what's important! Hopefully without sounding too much like a broken record, this has been a lot of fun - a change is really as good as a rest! Two photos of her in the full Golden arrow regalia, at the head of a rake of 12 wheel Pullman coaches. To finish off, here's one of them moving photos I've also got one step closer to finishing this: Don't scrutinize it too hard, there is a very long list of things that aren't right - not least of which are the tender wheels, which make it sit lower than the loco. But this was designed freehand without any proper technical drawings, and printed mainly in (I think) SLS, with the cab and some other details done in SLA. It certainly has the dimensions of a K though. An LBSC J class which has been done to a much finer standard is actually being pieced together and sent off to a local RMWeb 3D printing expert, which should be exciting. That's all for now! 3 11 Link to post Share on other sites More sharing options...
sem34090 Posted November 4, 2019 Share Posted November 4, 2019 Are these potentially going to be made available to purchase? (Well, someone had to ask it...) 1 Link to post Share on other sites More sharing options...
Jack P Posted November 4, 2019 Author Share Posted November 4, 2019 2 hours ago, AVS1998 said: It doesn't matter if the K isn't entirely accurate, it certainly looks like one and it's smashing! The J also sounds brilliant, I can't wait to see what that turns out like. Exactly! If I'd been a bit more pro-active and bought filler primer I think it would've helped significantly. I'll keep everyone updated on the J1 progress, as well as an I3 body, which Javier of this parish has designed to go on the new(er) NS Wills I3 chassis. 32 minutes ago, sem34090 said: Are these potentially going to be made available to purchase? (Well, someone had to ask it...) I believe so, there is no reason we wouldn't want the general public to have access to these, But I did suggest that we hold off on the K class re-tool until announcements have been made in January. I don't know anything, but if there is an alphabetical LBSC announcement we can focus our efforts elsewhere. With the J1 we are working on the chassis being 3D printed too, which means that it's up to the purchaser to obtain, wheels, axles, motor, gearbox, and the motion. Next on the list is an H16 designed to fit on a slightly tweaked S15 chassis. The idea of the comparison will be to see the pros and cons of both adapting a RTR chassis and using a 3D printed one. A big element of this is cost - is it cheaper to buy a full loco and steal the chassis, while selling or retaining the other bits as spares, or to buy your own parts and build the running chassis yourself. any input on this from readers would be great! Link to post Share on other sites More sharing options...
sem34090 Posted November 4, 2019 Share Posted November 4, 2019 (edited) 6 hours ago, Jack P said: I'll keep everyone updated on the J1 progress, as well as an I3 body, which Javier of this parish has designed to go on the new(er) NS Wills I3 chassis. Oooh! Quote I believe so, there is no reason we wouldn't want the general public to have access to these, But I did suggest that we hold off on the K class re-tool until announcements have been made in January. I don't know anything, but if there is an alphabetical LBSC announcement we can focus our efforts elsewhere. Hmm. I'd venture that I for one might be tempted to buy a kit over RTR if the kit was cheaper. Quote With the J1 we are working on the chassis being 3D printed too, which means that it's up to the purchaser to obtain, wheels, axles, motor, gearbox, and the motion. Next on the list is an H16 designed to fit on a slightly tweaked S15 chassis. H16?! I need one! Well, not really, but I really want one! In fact I might even be tempted to scrap my S15 for that. Quote The idea of the comparison will be to see the pros and cons of both adapting a RTR chassis and using a 3D printed one. A big element of this is cost - is it cheaper to buy a full loco and steal the chassis, while selling or retaining the other bits as spares, or to buy your own parts and build the running chassis yourself. any input on this from readers would be great! I would say that offering both would be preferable. Edited November 4, 2019 by sem34090 1 Link to post Share on other sites More sharing options...
KeithHC Posted November 4, 2019 Share Posted November 4, 2019 Any news on the C2X............... Keith Ps The K looks great what chassis are you using or is it 3D printed as well. 1 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted November 4, 2019 Share Posted November 4, 2019 11 hours ago, Jack P said: Don't scrutinize it (K class) too hard, there is a very long list of things that aren't right - not least of which are the tender wheels, which make it sit lower than the loco. But this was designed freehand without any proper technical drawings, and printed mainly in (I think) SLS, with the cab and some other details done in SLA. It certainly has the dimensions of a K though. For those like me that don't know the loco well it looks right enough, in that it doesn't call attention to itself by ill proportions or something manifestly 'not right'. With the tender wheels sorted out to get the better height match it will look well running on the layout, and for me at least that's the name of the game. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Tony Teague Posted November 6, 2019 RMweb Gold Share Posted November 6, 2019 On 03/11/2019 at 21:55, Jack P said: I see what you mean. I managed to get the part off - but I thought I better leave it, nothing worse than botching something up when it's not yours! She has a few little touches left to go, but on the whole the project is complete! It's not perfect, but I would argue nothing really ever is, my mate is happy, and that's what's important! Hopefully without sounding too much like a broken record, this has been a lot of fun - a change is really as good as a rest! Two photos of her in the full Golden arrow regalia, at the head of a rake of 12 wheel Pullman coaches. Jack Brit looks great - but of course the Golden Arrow did not contain 12 wheelers in her day! - sory! Tony 1 Link to post Share on other sites More sharing options...
Jack P Posted November 7, 2019 Author Share Posted November 7, 2019 3 hours ago, Tony Teague said: Jack Brit looks great - but of course the Golden Arrow did not contain 12 wheelers in her day! - sory! Tony Aha - As you know it's well outside my era, I just wanted an excuse to run them! 2 Link to post Share on other sites More sharing options...
robmcg Posted November 7, 2019 Share Posted November 7, 2019 17 minutes ago, Jack P said: Aha - As you know it's well outside my era, I just wanted an excuse to run them! If you would permit me to intrude on your thread with an edited photo, here is my version of the lovely 34100 'Appledore' for the LAST steam-hauled Golden Arrow in 1961 ... what a superb engine the Light Pacifics are, as is Iron Duke and as are 12-wheel Pullmans, great atmosphere. I get into all kinds of trouble for posting edited pictures so please feel free to complain and I'll remove it. It's ok to photo edit skies and stuff, alter brightness contrast, composition, even perspective, but steam or detail, no. p.s. lovely double slip crossing in foreground, must be in P4... ! 8 Link to post Share on other sites More sharing options...
RMweb Gold Tony Teague Posted November 7, 2019 RMweb Gold Share Posted November 7, 2019 6 hours ago, Jack P said: Aha - As you know it's well outside my era, I just wanted an excuse to run them! And they do look great, don't they - I have a rake of 12 wheelers and the extra wheels somehow give a special sound when they run past! Tony 1 Link to post Share on other sites More sharing options...
34theletterbetweenB&D Posted November 7, 2019 Share Posted November 7, 2019 On 04/11/2019 at 00:53, Jack P said: ...The idea of the comparison will be to see the pros and cons of both adapting a RTR chassis and using a 3D printed one. A big element of this is cost - is it cheaper to buy a full loco and steal the chassis, while selling or retaining the other bits as spares, or to buy your own parts and build the running chassis yourself. any input on this from readers would be great! This far for myself, it has always been cheaper to go the RTR mechanism route, when something suitable and of proven good performance is available. Scout around to find what is required at a good price (the least popular version remaindered, stock clearances, s/h, etc.), and the complete item is typically cheaper than the total of the required components for a kit built mechanism. Selling on the surplus parts - including the box! - can bring the cost down to 'very small indeed'. (The RTR manufacturers are a big help in this matter by not selling body spares to any extent.) 1 1 Link to post Share on other sites More sharing options...
Jack P Posted November 27, 2019 Author Share Posted November 27, 2019 (edited) Oops, it's been a while since i've posted. It seems coming into the silly season and summer here in NZ means my priorities are pulled in different directions. New bike, getting the car serviced, Christmas presents etc etc. This is a rather large update, so maybe make yourself a tea and settle in! Rather sadly my grandmother passed away on the 7th of November, she had been battling with heart failure and while it is immensely sad, the old addage of, "she's in a better place now" certainly applies. I even have a model related project in the works to honour her memory. More on that later though. My Grandmother grew up in the london suburbs and travelled to school behind steam every day. Was taken to the countryside during the blitz behind steam, and eventually relocated and started a family in Woking. My dad and his brothers have vivid memories of playing near the main line, and being deathly scared of the live rail - a Southern connection if there ever was one! A little further afield than the Southern is the cutlery photographed below, gifted to me by 'her'. Can anyone help with identification and valuation? I thought some of the LNER stuff looked a little Art Deco in style. Any information is good information though! In the same vein, I thought I would post a photo of some NZR heritage, A Crown Lynn NZR saucer (of a cup and saucer set), I am unsure of the vintage but I think, possibly the early 50's. For anyone interested there is some further information here: https://collections.tepapa.govt.nz/topic/1148 I've recently bought a few more from our local auction site (trademe) and we have a few for saucers in storage, along with a few cups. They are a very interesting part of our/my railway history. Plus, my one might be the most often used one in the country - it's the plate the cat eats off!! Next up, our local model rail show, Rail-Ex. Now it's certainly no Warley, but it's the biggest show in the lower north island. The first photo of this update is me outside the hall. This year I went with one thing in mind - NZR rail! (any surprises there?) The first thing that caught my attention was this massive 7 1/4 inch gauge Streamlined NZR J Class sitting in the middle of the hall. 'Gloria' - in all her, err, glory. Here's some more info on the streamlined J's. https://en.wikipedia.org/wiki/NZR_J_class_(1939). A quick summary below; Built in 1939 the 4-8-4 Mountain class were built by the North Brtish works as a capable mixed traffic engine, designed to run on the secondary lines and be more powerful than the AB class 2-6-0's. they were equipped with some interesting and modern features, like roller bearing axles and twin Westinghouse brake pumps. 3 of them lasted until the end of steam on 26 October 1971, and 3 have been preserved. I have recently been in talks with a kit supplier who is due to release this in S-Scale (HO/OO equivalent) in the new year. Now for what is really a niche industry, the prices of these kits are an interesting talking point. I see/hear lots of complaints about the cost of RTR locos in the UK, and sure, they are on the increase, with the newly announced SECR D due to cost £250. Precious little (read: nothing) is available ready to run for NZR S-scale. There is an expanding range of kits, but they seem to put RTR British stuff into perspective as good value! Most coach kits are around £60, and most wagon kits around £30, the loco kits sort of range from £150-£700 depending on what it is (tank engine - Garratt). Now this seems expensive on first glance, but these kits come with everything needed except hand tools and paint. So for the loco kits, you get wheels, a self quartering wheel jig, motor, gearbox, nickle silver frames and white-metal castings. I think when you take this into consideration they are actually quite good value. The coach kits also come with compensated bogies, etched plates and transfers! Now, this is where it gets mental. I recently watched a kit-built 4-8-4 loco go up for auction on Trade-me (like a local ebay), it sold on sunday night for the astronomical price of $2011 - approx £1000. Of course I've gone and bought some kits, which are due to arrive any day now! NZR modelling here I come! I was also gifted some EM gauge wheels at Rail-ex.. which I have a plan for, eventually. Back to models - there was this quaint little early 1900's scene Some extremely well crafted scenery, all kit built, scratchbuilt etc. Looks fantastic! Then there's this, for the life of me I can't remember the name of the builder, but it's the product of 15 years work. All scratch-built, except for a few kits/modified RTR items. Even the loco wheels have been turned. I took precious little in the way of photos of this, but the shay loco ambling around the track had working inside valve gear. This was my favourite, there was a photo on the board behind of the prototype, apparently folks here had a bit of a thing for cutting up cars/trucks and throwing them on locomotive chassis'. Here's some NZR 9mm, (O gauge equivalent). An NZR AB class (https://en.wikipedia.org/wiki/NZR_AB_class) on a small piece of scenic rolling road. On the far side of the hall was this gigantic 9mm layout, with a fantastic assortment of stock, everything was DCC sound/lights and being controlled with a wireless hand controller system, all very exciting! Very impressive - I only wish I had taken some more photos! Now for some of my own medicore attempts: SR cattle wagons have been repainted and the transfer application has begun! I have two of the earlier maunsell diagram ones that are in line for a repaint, but I might wait until the SECr box vans arrive and do them at the same time. DONE! My SECR bolsters are finished. Chains, shackles and stanchions added. I did have an issue with one of the AG wheelsets - a tyre delaminated from the wheel centre as it had shrunk and become very warped, no bother, plenty of spares. That's all for now. apologies that this has gone slightly off topic from specifically 'Southern Railway Modelling', if the NZR stuff gets more serious I might start a different thread! As usual, comments, criticism, discussion, random tangents are all welcome, (and if you got this far) thanks for reading! Still looking apparently.... Edited November 27, 2019 by Jack P 18 Link to post Share on other sites More sharing options...
sem34090 Posted November 27, 2019 Share Posted November 27, 2019 I must admit that despite my lack of urgency when it comes to foreign travel, New Zealand is quite high on that list - Nice pictures, Jack. 1 Link to post Share on other sites More sharing options...
RMweb Premium 21C123 Posted November 27, 2019 RMweb Premium Share Posted November 27, 2019 Snap for the cat dish... Roger 1 1 Link to post Share on other sites More sharing options...
BrightonBoi Posted December 16, 2019 Share Posted December 16, 2019 I can report that the LBSCR K is back in Blighty! Thank you Jack P for your hard work and great finish on this loco, and prompting me to get started on the forum thing.... I now have a workbench of my own, so hopefully more of the design stage of some future projects that involve the both of us is covered. BrightonBoi 9 1 Link to post Share on other sites More sharing options...
autocoach Posted December 16, 2019 Share Posted December 16, 2019 The NZR railway meet is very interesting. It does give a bit of a different meaning to "southern". 1 Link to post Share on other sites More sharing options...
Jack P Posted December 27, 2019 Author Share Posted December 27, 2019 (edited) Merry Christmas and a happy holiday season to all - It's been fantastic having you all along for the ride so far. Here to an exciting 2020 - I've certainly got a lot planned! Stay safe everyone! Edited December 27, 2019 by Jack P 9 2 Link to post Share on other sites More sharing options...
RMweb Premium SteveyDee68 Posted January 7, 2020 RMweb Premium Share Posted January 7, 2020 (edited) Jack Have just finished reading your thread from start to finish - what fantastic skills you demonstrate and thanks for sharing your methods too. I have somehow caught the "Southern" bug, and have amassed quite a selection of SR (BR) locos, although Rule 1 applies because I get the lot, no matter where it might be seen (or not) in reality. One day, I shall be brave enough to start weathering my locos and stock - only hope I can do so many o the standards you show. Looking forward to what you might show us this year! Steve S Edited January 7, 2020 by SteveyDee68 Typos! 1 Link to post Share on other sites More sharing options...
Jack P Posted January 23, 2020 Author Share Posted January 23, 2020 (edited) Just a brief update. For those who know, I've had a pretty mediocre workstation so far. However, Having recently moved, and being granted more space, this meant I had options. Over the summer (if you could call it that here), I've done precious little modelling. I have however spent some time building myself a half decent PC and sorting my modelling space out. Hopefully this means that when things do kick back into gear, i'll be ready to go. What am I waiting on you might ask? Well the rest of my models are still at my parents place and I need to make time to go and get them all! It's also meant that my photo box is one step further to being done. It now has its own lighting! That's all for now, but fingers crossed there is some more soon! Edited January 23, 2020 by Jack P 12 Link to post Share on other sites More sharing options...
Jack P Posted January 26, 2020 Author Share Posted January 26, 2020 Managed to get some 'actual' modelling done over the weekend, First up, a strip down and repaint of the new Hornby LSWR Brake Van. It just needs transfers and couplings to finish it off. I also started weathering the Bachmann Crane; I also added some details in the form of planks and chain. There's also a few other bits and bobs to go on the match truck. That's all for now! 15 Link to post Share on other sites More sharing options...
RMweb Gold Tony Teague Posted January 31, 2020 RMweb Gold Share Posted January 31, 2020 Jack You've convinced me on the LSWR brake vans; I have been sitting looking at a pair of them and they are just not right! Will have to take the bull by the horns. Tony Link to post Share on other sites More sharing options...
Bustered Posted January 31, 2020 Share Posted January 31, 2020 That’s better! best wishes Nige 4 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now