RMweb Gold Captain Kernow Posted March 6, 2019 RMweb Gold Share Posted March 6, 2019 On 07/05/2017 at 18:37, Kylestrome said: I’m not one of your ‘hair shirt’ P4 modellers Well, the quality of your work and attention to detail indicates to me, that my own shirt is somewhat less hairy these days. 1 Link to post Share on other sites More sharing options...
Adam Posted March 6, 2019 Share Posted March 6, 2019 3 hours ago, Kylestrome said: I’ve also recently acquired another Airfix/Kitmaster/Dapol (I wish they’d make their mind up!) Prestwin kit. The packaging proclaims that it’s made in Wales, which makes a pleasant change from China, and that it’s made from re-cycled plastic. Bravo! This one will have some of its bits used to make a Diagram 1/274 wagon (higher body and 10 foot wheelbase) mainly because I like a bit of a challenge and it’s more fun than pulling RTR stuff to bits. Watch this space. David Ah, I've got most of one of those - some details here: https://www.rmweb.co.uk/community/index.php?/topic/37002-adams-em-workbench-an-early-lms-brake-part-3/&do=findComment&comment=3155437 As a starting point for the chassis, the Red Panda kit has the wrong axleguards, but also more shallow solebars - you'll see I chopped up a 12' wb moudling (it's wrong for the pipe wagon it came with). Not that there's a 'correct' route towards this, of course. I must finish mine... Adam Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted March 6, 2019 Author RMweb Premium Share Posted March 6, 2019 3 hours ago, Fat Controller said: A 'Red Panda' underframe would do for the Prestwin, though you'd have to fill in the spaces in the axleguards to represent the Plate type. Certainly easier than doing a cut'n'splice on the brake levers. The other possibility would be to use the Parkside Iron-Ore Tippler chassis. Thanks for the suggestions, but I'm firmly in the "use the bits I already have" camp – especially when everything I order has to cross the Channel and I can't just visit my next local show for new parts. I do have a cunning plan, though (sort of). David Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted March 6, 2019 Author RMweb Premium Share Posted March 6, 2019 44 minutes ago, Adam said: Ah, I've got most of one of those - some details here: https://www.rmweb.co.uk/community/index.php?/topic/37002-adams-em-workbench-an-early-lms-brake-part-3/&do=findComment&comment=3155437 Adam, it was seeing your Prestwin that pushed me in the direction of having a go at one myself. The tricky bit will be making the ladders, which is probably the stage you're at? David Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted March 6, 2019 Author RMweb Premium Share Posted March 6, 2019 (edited) I’ve made a start on the Diag.1/274 Prestwin. There is no shortcut to building the chassis for this and, by the time I have finished it, it will consist of a whole load of bits and pieces from various sources, including odd bits made from scratch. The basis is a rectangle of 1mm Plastikard, the solebars from a Parkside (or possibly Red Panda?) chassis kit and the headstocks from another. The only axleguards that I could find, that bear any resemblance to what’s needed, were some sprung ones from Bill Bedford. Springing is overkill for such a short wheelbase but, needs must. I spent a fair bit of time chopping out the flange from the kit base plate, to stick on top of the chassis, but it will help greatly with building up the rest of the body. The curved end sections from the kit have been used and the rest built up from styrene sheet. The missing end top sections have been filled in with laminations of 30 thou. sheet. These are slightly oversize and will be sanded back flush. The curved laminations were cut out using my trusty old school dividers which have one point stoned to form a cutting blade. More to come. David Edited April 11, 2022 by Kylestrome 6 1 Link to post Share on other sites More sharing options...
Adam Posted March 6, 2019 Share Posted March 6, 2019 Ah, ladders! Actually, if the 'straight' Prestwin build is any sort of guide I'm hopeful this should be relatively simple. I used some of Justin Newitt's etched ladder stiles intended for Bachmann's anchor-mounted tanks (suitably straightened out which is certainly possible, post-assembly). That must be roughly the stage I'm at, but the boxfile containing the wagon is at the other end of the garden! Adam 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted March 12, 2019 Author RMweb Premium Share Posted March 12, 2019 (edited) I’ve moved on a bit from the last update, as you can see from the photo. With the ends sanded flush there is a nice flat surface on top of the wagon, so now is a good time to turn it over and finish making the chassis. The axle springs have been separated from the Airfix kit solebars and were a nice snug fit. As I’m making this up as I go along, it’s nice when something fits nice and snug! It's a pity I forgot to drill the holes in the axleguards, though. Vee hangers from Maskits have been glued in as well as roller bearing castings from 51L Wizard Models. The vacuum cylinders (Parkside) have been fitted, together with the brake lever cross shaft (0.45mm wire inside sections of electrical wire sleeving) and cylinder linkages (pieces of styrene cut to shape). The vacuum cylinder linkages are a bit wonky, but that will not be obvious when the wagon is on the layout. Brake cross shafts (0.7mm wire) and safety hangers (0.3mm wire) complete the picture. David Edited April 11, 2022 by Kylestrome 5 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post Kylestrome Posted March 12, 2019 Author RMweb Premium Popular Post Share Posted March 12, 2019 (edited) Just for a change I’ve been spending more time at the workbench than in front of my computer screen, so this wagon is now almost finished. I have just made up both ladders and fitted the handrails to one side. Those handrails are an absolute pig to make, having curves and angles in all directions, and the jury is still out on whether I should be sentenced to doing the other side as well. After all, one can only see one side when the wagon is on the track … David PS. No prizes for spotting where I cut a 'pipe' too short! Edited April 11, 2022 by Kylestrome 15 22 Link to post Share on other sites More sharing options...
RMweb Premium Popular Post Kylestrome Posted June 10, 2019 Author RMweb Premium Popular Post Share Posted June 10, 2019 (edited) Despite paint brushes and an airbrush being everyday work tools for half my working life, I still like to procrastinate like an absolute beginner when it comes to painting models. I’m not sure why because finishing a model should be a pleasurable experience, shouldn’t it? After a long while in the cabinet here are my Alumina wagons are ready for service on Kinlochmore. The 1/274 Prestwin. Variations on a theme of Presflo. And here is the complete train (of empties) ready to depart west, in the direction of North Ballachulish. David Edited April 11, 2022 by Kylestrome 37 11 2 Link to post Share on other sites More sharing options...
RMweb Gold Richard_A Posted June 10, 2019 RMweb Gold Share Posted June 10, 2019 very realistic. 1 1 Link to post Share on other sites More sharing options...
26power Posted June 12, 2019 Share Posted June 12, 2019 An update to an old thread about Prestwins has reminded me of it, see: Don’t know if of any use or too late in the day but there is a picture of a rake of three Prestwins at Burntisland in that thread. I’ll try and post a link for your thread there as those following that thread might not be aware of this thread! Hope that okay. 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted June 12, 2019 Author RMweb Premium Share Posted June 12, 2019 (edited) On 12/06/2019 at 16:00, 26power said: Don’t know if of any use or too late in the day but there is a picture of a rake of three Prestwins at Burntisland in that thread. The three Prestwins in the Burntisland photo are diagram 1/277 wagons like this nearly straight build of the Airfix kit. David Edited November 4, 2022 by Kylestrome 7 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted January 29, 2020 Author RMweb Premium Share Posted January 29, 2020 (edited) To counteract the stress of having my favourite in-law staying over the Christmas period I thought I could do with some nice easy wagon building. Although making the 16t mineral wagon was relatively soothing the same could not be said for the 13t open. It proved to be one of those ‘two-steps-forward-one-step-backwards’ jobs. Both wagons were weighted by making false floors out of 1mm thick lead sheet. Lots of extra fun with bits of wire and oddments from Masokits detailing etches, as well as Lanarkshire Models vacuum hoses and buffers from Gibson and MJT. The next project will be using this Hornby tank wagon as its basis. David Edited April 11, 2022 by Kylestrome 11 3 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted January 30, 2020 Author RMweb Premium Share Posted January 30, 2020 (edited) I’m going to have a go at modelling this 1939-built tank wagon because I like a challenge and I can just about justify its use on my layout, which conveniently serves a whisky distillery in its late sixties operating period. One problem I have, is that all the photos that I can find show the side without the walkway and ladder. I have no idea where the ladder was attached or what it looks like. If anyone appropriate information about the ladder side I would be glad to hear from them. While the tank from the Hornby wagon will be useful, the chassis was a big disappointment and will be replaced by a scratch built one. The basic underframe is soldered up from 3 x 1.5mm brass channel. The Comet Models axle guards are solidly attached to the solebars, ensuring that the axles will be true and square to the chassis. The axle guards have been spaced downwards by soldering on some 0.5mm thick strips. Later on in the construction, when the underframe has a bit more structural rigidity, the centres will be cut out and discarded. The basic structure of the underframe has been filled out with 3 x 1.5mm brass strip and that is about as far as I will go with the soldering, as the amount of heat required for new joints is a risk to existing ones. Some parts, such as vee-hangers, can still be tacked on but a lot of the details from now on will be in plastic. I will also have to cobble up some brake gear using some of my stock of Masokits bits … David Edited April 11, 2022 by Kylestrome 10 Link to post Share on other sites More sharing options...
BernardTPM Posted January 30, 2020 Share Posted January 30, 2020 The chassis was pretty good for when it first came out... but that was about 40 years ago! Link to post Share on other sites More sharing options...
Signaller69 Posted January 31, 2020 Share Posted January 31, 2020 Hi David, did you see the recent discussion on that tank wagon? It is preserved on the Strathspey Railway I believe. Martyn. 1 2 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted January 31, 2020 Author RMweb Premium Share Posted January 31, 2020 5 hours ago, Signaller69 said: Hi David, did you see the recent discussion on that tank wagon? Thanks Martyn, I did. It was Neil's post that got me started on this project. 5 hours ago, Signaller69 said: It is preserved on the Strathspey Railway I believe. It is, and I'm hoping someone can help me with a photo of the side with the walkway and ladder? Regards, David Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted February 3, 2020 Author RMweb Premium Share Posted February 3, 2020 (edited) Here’s a bit more progress with the tank wagon. The brake hangers and safety loops were soldered to little brackets which will allow them to be ‘clipped’ over the cross braces and be retained with CA glue. Not really prototypical but better than trying to solder them on and risking nearby joints coming apart. The rest of the structural beams have been added, using Evergreen strip, and a representation of the buffer springs made with small pieces of brass screws. The brake details were assembled from separate Masokits etches and held together with wire pins. Of course, I made the typical beginners mistake of getting the first set of brake push rods on with the wrong orientation! Luckily, I was able to remedy the situation by moving the lifting link bracket (the extra bit next to the central vee hanger) to the opposite solebar. The tank barrel has been butchered to allow some lead weight to be epoxied to the cradle. The story so far. I think it’s beginning to look like something usable and it already runs quite happily through all my pointwork at breakneck speeds. David Edited April 11, 2022 by Kylestrome 11 6 Link to post Share on other sites More sharing options...
Adam Posted February 10, 2020 Share Posted February 10, 2020 On 31/01/2020 at 07:21, Kylestrome said: Thanks Martyn, I did. It was Neil's post that got me started on this project. It is, and I'm hoping someone can help me with a photo of the side with the walkway and ladder? Regards, David You mean this one? I must say, I wouldn't have expected the ladder to go like this: Adam 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted February 10, 2020 Author RMweb Premium Share Posted February 10, 2020 (edited) 2 hours ago, Adam said: You mean this one? I must say, I wouldn't have expected the ladder to go like this: Oh, that’s excellent! Thanks Adam. I had already come to the conclusion that the ladder was at that end, one can just make it out in this photo, But it’s great to have such a detailed photo to work from. David Edited February 10, 2020 by Kylestrome 1 Link to post Share on other sites More sharing options...
Adam Posted February 10, 2020 Share Posted February 10, 2020 (edited) Happy to help (and it's something to do while trying to persuade the baby to sleep!). This view is probably, if anything, more helpful: I wouldn't have guessed that the walkway went quite that far down the tank, for example. And this shows more clearly how its bracketed. Which is useful. Adam Edited February 10, 2020 by Adam 3 1 1 Link to post Share on other sites More sharing options...
Adam Posted February 10, 2020 Share Posted February 10, 2020 The problem, of course, is that I know I have one of these wagons knocking around and I now want to do one, too. The likelihood of one appearing in Somerset in the early '60s is, er, slim... Adam 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted February 23, 2020 Author RMweb Premium Share Posted February 23, 2020 (edited) They say that the devil is in the details, and this has certainly been true of this wagon. I keep finding more and more bits that need to be put on, which is why it has taken rather more time than I had expected it to. Even now, when it is almost finished, I’ve noticed that Hornby have simplified the cradle ends. The end stanchions should go right to the top of, and outside of the wooden crossbars. It’s something I can just about live with and I hope the wagon still has the general character of the original despite this flaw. I’ve left the tank and chassis separate for painting. Once the units have have been sprayed with the basic colours, and assembled, I will attach the tie rods between tank and chassis. David Edited April 11, 2022 by Kylestrome 8 5 Link to post Share on other sites More sharing options...
Adam Posted February 23, 2020 Share Posted February 23, 2020 Splendid work, David - which is doing nothing for my desire to shamelessly copy your efforts! The mesh is very fine, can you remember where you got it from? Adam 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted February 23, 2020 Author RMweb Premium Share Posted February 23, 2020 24 minutes ago, Adam said: The mesh is very fine, can you remember where you got it from? The mesh was bought years ago at the Intermodellbau from a supplier that no longer exists. Not very helpful I'm afraid, sorry. David 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now