RMweb Premium Nile Posted December 3, 2016 RMweb Premium Share Posted December 3, 2016 (edited) With the recent release of the Minitrains Bagnall loco (probably the first mass produced 009 model of a British loco) there is now enough RTR stock available to run a British 009 model railway. With plenty of 009 track available from Peco it couldn't be easier now to model a narrow gauge railway in a small space. Here are some examples from last night's test running at Willesden Junction. My Bagnall with some Peco Glyn Valley coaches and brake van. Another Bagnall with Peco L&B wagons and Glyn Valley brake van. Edited January 27, 2017 by Nile 14 Link to post Share on other sites More sharing options...
Southwold Posted December 3, 2016 Share Posted December 3, 2016 I gave up OO9 because of the lack of British RTR. Perhaps I should have waited instead of going O16.5! Ken Link to post Share on other sites More sharing options...
bertiedog Posted December 3, 2016 Share Posted December 3, 2016 Not exactly a blaze of publicity about the release of this model,is there!, not mentioned on RM web till this posting as far as I can see. With the new L&B 262 from Heljan, this 040 could be justified on the L&B as they used very closely related locos on the construction of the original line. What is the running like with such a short wheelbase? Has it a flywheel as the others have? Stephen Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted December 3, 2016 RMweb Gold Share Posted December 3, 2016 You can see the flywheel in the lower picture It's based on Charles Insley's winning entry in the competition to design a UK model to use the existing chassis. As to blaze of publicity, Minitrains doesn't seem to do that but with the prolific number of new locos I guess the market is at the level Andreas can supply comfortably. As it's a sideline to his main business I guess he wants to keep it that way. Link to post Share on other sites More sharing options...
RMweb Premium Nile Posted December 3, 2016 Author RMweb Premium Share Posted December 3, 2016 (edited) Minitrains has a fairly low profile in this country outside the narrow gauge community, and this is their first British outline model as detailed by Paul above. We had both locos running on Sand Point at Broadstairs last weekend where they performed perfectly, with smooth and slow running possible. As you can see from the photos they can handle a prototypical load with ease. There are a few UK stockists around, such as Invicta Rail. Edited December 3, 2016 by Nile Link to post Share on other sites More sharing options...
Stevelewis Posted December 3, 2016 Share Posted December 3, 2016 (edited) Minitrains has a fairly low profile in this country outside the narrow gauge community, and this is their first British outline model as detailed by Paul above. We had both locos running on Sand Point at Broadstairs last weekend where they performed perfectly, with smooth and slow running possible. As you can see from the photos they can handle a prototypical load with ease. There are a few UK stockists around, such as Invicta Rail. Arcadia Rail, Gaugemaster, also £115 at G master 2 variants in stock, not sure about Arcadia stock Edited December 3, 2016 by Stevelewis Link to post Share on other sites More sharing options...
rue_d_etropal Posted December 4, 2016 Share Posted December 4, 2016 (edited) Some companies seem to prefer tomake loud statements about products they intend to produce, but then you have to wait years to see them in reality. Minitrains work by getting on with the job of designing and then producing models. They have done something similar with new French models, by asking what people want ,and then getting on with it. Having said that , I will be intersted to see those new models. Only problem with some Minitrains models is scale, but that does not seem to bother some OO9 modellers. There is a lot of rubber scaling/gauging, but if you are happy with that then I won't grumble. This new loco does look nice, and will help the renewed interest in OO9 layouts. One warning for those who were not keen on the old wwarren type fun layouts seen over the years, they will be back. They are fun, and probably get more people to try OO9. Just reading the first post, and I wonder what some consider is definition of mass production. Minitrains produce models in relatively small batches which is one reason they succeed, but remember Fourdees introduced what could still be considered a mass produced model a couple of years ago. Where Minitrains are scoring well, is price, proving that it is possible to produce models at a lower price than companies who mass produce in China. Edited December 4, 2016 by rue_d_etropal Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted December 4, 2016 RMweb Gold Share Posted December 4, 2016 Only problem with some Minitrains models is scale, but that does not seem to bother some OO9 modellers. There is a lot of rubber scaling/gauging.Not really a problem though is it? and doing it in 009 is no different there to people running OO & HO standard gauge together. At least the NG prototypes often were from whatever was available and you did genuinely get some odd size combinations. There's a section of the market that likes scale modelling and a section that just likes running trains, both go to the same shows so it's all valid rather than needing a 'warning' Just need to follow Frank's advice 1 Link to post Share on other sites More sharing options...
RMweb Premium Nile Posted December 4, 2016 Author RMweb Premium Share Posted December 4, 2016 (edited) When it comes to mass production I'm thinking in terms of production running into four figures (more than 1000 units) which I expect this loco to easily achieve. I would be surprised if any Fourdees model got anywhere near that figure. The other reason I discounted Fourdees is that their models use RTR chassis from another manufacturer (Farish or Kato). The same applies to Paul Windle locos, until recently these were the only 009 RTR locos available apart from one-off commissions. Edited December 4, 2016 by Nile Link to post Share on other sites More sharing options...
Hobby Posted December 4, 2016 Share Posted December 4, 2016 (edited) I gave up OO9 because of the lack of British RTR. Perhaps I should have waited instead of going O16.5! Ken I'm trying to reconcile those two statements as, as far as I am aware, there's even less O-16.5 RTR!! Edited December 4, 2016 by Hobby Link to post Share on other sites More sharing options...
Charlie009 Posted December 5, 2016 Share Posted December 5, 2016 As Paul RHB says, the prototype for the Minitrains model was built as a competition entry to find a British outline model to use the standard MinitrainS Krauss mechanism. My model was inspired by 'Excelsior' (late of the Kerry Tramway), known to most in her 0-4-2 configuration but built as an 0-4-0. Because the model was built to fit the chassis unmodified, there were, shall we say, some compromises - notably in width and length, plus the need to use the standard MinitrainS stovepipe funnel to fix the body to the chassis. That said, the model has been released for a couple of weeks and I've already seen several in modified condition on other forums! Charlie Insley Link to post Share on other sites More sharing options...
BR-Green Posted December 10, 2016 Share Posted December 10, 2016 (edited) Not exactly a blaze of publicity about the release of this model,is there!, not mentioned on RM web till this posting as far as I can see. With the new L&B 262 from Heljan, this 040 could be justified on the L&B as they used very closely related locos on the construction of the original line. What is the running like with such a short wheelbase? Has it a flywheel as the others have? Stephen I'm probably going to gaugemaster where they sell them I might be able to get a train there to you want me to see if I can get then to run one a round a layout and tell you how it works? Edited December 11, 2016 by BR-Green Link to post Share on other sites More sharing options...
RMweb Premium John Isherwood Posted December 10, 2016 RMweb Premium Share Posted December 10, 2016 I might be able to get a train there to you want me to see if I can get then to run one a round a layout? Huh ??? Regards, John Isherwood. Link to post Share on other sites More sharing options...
BR-Green Posted December 11, 2016 Share Posted December 11, 2016 You can see the flywheel in the lower picture It's based on Charles Insley's winning entry in the competition to design a UK model to use the existing chassis. As to blaze of publicity, Minitrains doesn't seem to do that but with the prolific number of new locos I guess the market is at the level Andreas can supply comfortably. As it's a sideline to his main business I guess he wants to keep it that way. I've heard that this model is quite unrealistic to the real thing apparently the real life loco is nowhere near the height and much more Smaller then the model is ? Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted December 11, 2016 RMweb Gold Share Posted December 11, 2016 (edited) Well unrealistic is a tad strong as it captures the proportions well and it's obvious what it is, but it is scaled up to match the similar stock in 009. Minitrains has a philosophy, if you don't like it don't buy their products , but they seem to be doing well and producing more new NG models than anyone else. A scale 009 Bagnall would require a completely new design and smaller motor, the competition that spawned this model was specifically to use the existing Minitrains chassis for a much requested U.K. Prototype. If you want absolute scale then there are two rtr locos on the way from Heljan & Bachmann or a huge range of kits Hornby, Bachmann, Electroen all produce basic locos of no accurate prototype too. Edited December 11, 2016 by PaulRhB Link to post Share on other sites More sharing options...
Quarryscapes Posted December 11, 2016 Share Posted December 11, 2016 Well unrealistic is a tad strong as it captures the proportions well and it's obvious what it is, but it is scaled up to match the similar stock in 009. Minitrains has a philosophy, if you don't like it don't buy their products , but they seem to be doing well and producing more new NG models than anyone else. A scale 009 Bagnall would require a completely new design and smaller motor, the competition that spawned this model was specifically to use the existing Minitrains chassis for a much requested U.K. Prototype. If you want absolute scale then there are two rtr locos on the way from Heljan & Bachmann or a huge range of kits Hornby, Bachmann, Electroen all produce basic locos of no accurate prototype too. Indeed, a scale model of Excelsior would be truly tiny, but it was not the only size of similar design. Backwoods Miniatures make a version too. Link to post Share on other sites More sharing options...
RMweb Premium Nile Posted December 12, 2016 Author RMweb Premium Share Posted December 12, 2016 (edited) Bagnall 'wing tank' locos came in a variety of sizes but the basic shape remained the same, with the characteristic inverted saddle tank at the front. As Charlie states in post #11 this model was inspired by Excelsior and shouldn't be considered as a scale model of it. It could be thought of as a model of a larger version that Bagnall could have built. The cab on this model is well proportioned for 4mm scale. Narrow gauge locos tend to vary in size more than standard gauge ones, due to the greater variety of loading gauges. Edited December 21, 2016 by Nile Link to post Share on other sites More sharing options...
rue_d_etropal Posted December 12, 2016 Share Posted December 12, 2016 PaulRhb said rue_d_etropal, on 04 Dec 2016 - 10:27, said: Only problem with some Minitrains models is scale, but that does not seem to bother some OO9 modellers. There is a lot of rubber scaling/gauging.Not really a problem though is it? and doing it in 009 is no different there to people running OO & HO standard gauge together. I have not come across many these days mixing OO and HO standard gauge recently. Quite often HO figures are used for OO , but that is not quite the same. Of course those buying the latest British liveried 060 locos produced by Electrotren are mixing scales, but as the prototypes are Spanish broad gauge it is not so noticable, especially when the size of a Terrier or a J72 is taken into account. Standard gauge industrial locos can vary in size like narrow gauge ones. They are often designed to specific locations which may have restritions on height and width. Rubber gauging and scaling is pretty endemic in narrow gauge modelling. Nothing wrong with that as long as you are not claiming to be modelling to scale. Advantage of narrow gauge is that loading gauge varied a lot, so when stock moved to a different railway, it might look very different. Part of the charm of narrow gauge. I have not had a chance to look at the Minitrains USA loco but a friend has told me he thinks it does look underscale, which it is if you are modelling 4mm/ft. Some locos are not so obvious. There are modellers modelling OO and those modelling HOe, which is why I offer both scales in my 3D printed range. In fact for smaller models it should be HOf using 6.5mm gauge track. Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted December 12, 2016 RMweb Gold Share Posted December 12, 2016 The other thing with a freelance layout is why couldn't that line have ordered a slightly larger version of a catalogue loco? Hunslet, Bagnall etc would basically do this if asked to tender for real lines to a spec they didn't already produce. 1 Link to post Share on other sites More sharing options...
The Dorset Wanderer Posted December 12, 2016 Share Posted December 12, 2016 New Bagnal and Scargoey(hope that's right or the trolls will get me ) plus Roco and 3D printed on Kato chassis. Modified 3mm brake van plus coaches by Peco,Egger, Parkside and Roco- does that make me a Phillistine? No it makes me a modeller! Layouts in 3mm- published twice in RM,exhibited twice at Warley, 4mm awaiting detailing and 009 just for the hell of it!!! I have never had a roundy roundy layout before so I will make one in 009. Am I a bad person? No-Just a modeller. Steve 2 Link to post Share on other sites More sharing options...
RMweb Gold tractionman Posted December 12, 2016 RMweb Gold Share Posted December 12, 2016 Bagnal 'wing tank' locos came in a variety of sizes but the basic shape remained the same, with the characteristic inverted saddle tank at the front. As Charlie states in post #11 this model was inspired by Excelsior and shouldn't be considered as a scale model of it. It could be thought of as a model of a larger version that Bagnal could have built. The cab on this model is well proportioned for 4mm scale. Narrow gauge locos tend to vary in size more than standard gauge ones, due to the greater variety of loading gauges. Would it be possible to get a measurement of the height of the cab, just wondering if the Bagnel might be ok for 5.5mm scale, looks a little like an 18 inch gauge loco? All the best, Keith Link to post Share on other sites More sharing options...
BR-Green Posted December 15, 2016 Share Posted December 15, 2016 New Bagnal and Scargoey(hope that's right or the trolls will get me ) plus Roco and 3D printed on Kato chassis. Modified 3mm brake van plus coaches by Peco,Egger, Parkside and Roco- does that make me a Phillistine? No it makes me a modeller! Layouts in 3mm- published twice in RM,exhibited twice at Warley, 4mm awaiting detailing and 009 just for the hell of it!!! I have never had a roundy roundy layout before so I will make one in 009. Am I a bad person? No-Just a modeller. Steve Troll on RMweb you seriously haven't seen Facebook have you, you get trolled for having an opinion over not thinking something is wonderful and the Facebook page Link to post Share on other sites More sharing options...
BR-Green Posted December 15, 2016 Share Posted December 15, 2016 As Paul RHB says, the prototype for the Minitrains model was built as a competition entry to find a British outline model to use the standard MinitrainS Krauss mechanism. My model was inspired by 'Excelsior' (late of the Kerry Tramway), known to most in her 0-4-2 configuration but built as an 0-4-0. Because the model was built to fit the chassis unmodified, there were, shall we say, some compromises - notably in width and length, plus the need to use the standard MinitrainS stovepipe funnel to fix the body to the chassis. That said, the model has been released for a couple of weeks and I've already seen several in modified condition on other forums! Charlie Insley Okay I was considering getting one in adapting it to give it so I bunkers because something doesn't seem right to me with a local doesn't have bunkers on it I guess it's not a bad price loco considering it's 100 if I wanted a fourdees one agine The cheapest is 140 Link to post Share on other sites More sharing options...
RMweb Premium cornelius Posted December 15, 2016 RMweb Premium Share Posted December 15, 2016 Would it be possible to get a measurement of the height of the cab, just wondering if the Bagnel might be ok for 5.5mm scale, looks a little like an 18 inch gauge loco? All the best, Keith Rail level to top of cab is 38mm. Link to post Share on other sites More sharing options...
BR-Green Posted December 15, 2016 Share Posted December 15, 2016 Rail level to top of cab is 38mm. I take it you have one then ? Is it any good? Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now