pdanny Posted September 4, 2018 Author Share Posted September 4, 2018 Transfers added and my 313 is actually looking like the real thing now. Star buy was definately the Railtec Transfers door open button which are 3D so totally look the business. Next job is to varnish and complete the detailing so glazing and undercarriage can begin. I'm really pleased with it. 12 Link to post Share on other sites More sharing options...
Lyddrail Posted September 5, 2018 Share Posted September 5, 2018 Looking very good, well done. Cheers. Paul. Link to post Share on other sites More sharing options...
pdanny Posted September 5, 2018 Author Share Posted September 5, 2018 Looking very good, well done. Cheers. Paul. Hey, been a while. Hope all is well with you and the team. Thanks, glad you like. It's been a tough build but learning a lot from this one and loving the results. Want to get the glazing done so I can get cracking onto the interior. That'll be the bit that makes the difference. How's things? Is TWY on tour right now? Loving the paint job you guys did on the portakabin. LSE never looked so good 3 Link to post Share on other sites More sharing options...
Signaller69 Posted September 6, 2018 Share Posted September 6, 2018 Missed this thread until now, although not my timescale or area its always nice to see people building units and yours are absolutely top notch, a real credit. Will follow with interest. Martyn. 1 Link to post Share on other sites More sharing options...
Signaller69 Posted September 6, 2018 Share Posted September 6, 2018 (edited) Duplicate post. Edited September 6, 2018 by Signaller69 Link to post Share on other sites More sharing options...
pdanny Posted September 6, 2018 Author Share Posted September 6, 2018 Missed this thread until now, although not my timescale or area its always nice to see people building units and yours are absolutely top notch, a real credit. Will follow with interest. Martyn. Thanks mate. I always remember not being able to model my own region as the Manufacturers focused on steam or the other 3 regions. The southern is dominated by units and until very recently most were only ever available in kit form. So I built them and even now I still do because all the ones I want are still only available in kit form not that I'm complaining, I'm loving building them. Link to post Share on other sites More sharing options...
Kelly Posted September 10, 2018 Share Posted September 10, 2018 Seems that user is no longer active on eBay? they look like the best way to a 507/508/313/4/5 etc, have they moved elsewhere?? Link to post Share on other sites More sharing options...
Lyddrail Posted September 11, 2018 Share Posted September 11, 2018 I am no expert on 313s but when did they get door push buttons? 313001 did not have them at the time of being painted NSE but they did get them at some time later. However, the buttons do look very good. Cheers. 1 Link to post Share on other sites More sharing options...
piranha230 Posted September 12, 2018 Share Posted September 12, 2018 i have not been active on Ebay for a few weeks as I’m looking to put my class 507-315 parts and other parts onto a web site, I am thinking of abandoning Ebay as the fees are ridiculous, if anyone needs any parts my e-mail address is Andrew.marsland@live.co.uk Delivery time can be around a week from ordering as I do all the resin casting myself. The kit used to come as 3 pieces per body side as was on this model Danny built but it now comes as one piece bodysides, I am also thinking of doing fully built bodyshells, and possibly painted ones, The only thing I need to do is get the underframe components designed and then everything for the kit is done, the floors and bogie side frames have been available for the last month or so. 11 Link to post Share on other sites More sharing options...
Kelly Posted September 12, 2018 Share Posted September 12, 2018 i have not been active on Ebay for a few weeks as I’m looking to put my class 507-315 parts and other parts onto a web site, I am thinking of abandoning Ebay as the fees are ridiculous, if anyone needs any parts my e-mail address is Andrew.marsland@live.co.uk Delivery time can be around a week from ordering as I do all the resin casting myself. The kit used to come as 3 pieces per body side as was on this model Danny built but it now comes as one piece bodysides, I am also thinking of doing fully built bodyshells, and possibly painted ones, The only thing I need to do is get the underframe components designed and then everything for the kit is done, the floors and bogie side frames have been available for the last month or so. That is very welcome news Andrew. I can certainly understand that the fees with eBay can be quite high especially as PayPal will put theirs on top too. Your kit for the 507/508/31x is certainly the best I've come across. Link to post Share on other sites More sharing options...
piranha230 Posted September 12, 2018 Share Posted September 12, 2018 Thanks Kelly . Link to post Share on other sites More sharing options...
pdanny Posted September 12, 2018 Author Share Posted September 12, 2018 I am no expert on 313s but when did they get door push buttons? 313001 did not have them at the time of being painted NSE but they did get them at some time later. However, the buttons do look very good. Cheers. Not sure on the exact date/time but all the research shows it as being during their NSE phase as I have pics with and without. 313001 when first in NSE was without but I also have pics with so I can only assume it was between 88 and 93 lol. Link to post Share on other sites More sharing options...
pdanny Posted September 12, 2018 Author Share Posted September 12, 2018 i have not been active on Ebay for a few weeks as I’m looking to put my class 507-315 parts and other parts onto a web site, I am thinking of abandoning Ebay as the fees are ridiculous, if anyone needs any parts my e-mail address is Andrew.marsland@live.co.uk Delivery time can be around a week from ordering as I do all the resin casting myself. The kit used to come as 3 pieces per body side as was on this model Danny built but it now comes as one piece bodysides, I am also thinking of doing fully built bodyshells, and possibly painted ones, The only thing I need to do is get the underframe components designed and then everything for the kit is done, the floors and bogie side frames have been available for the last month or so. Glad at the news, was concerned after everything disappeared from eBay. Especially as I am still building and will need to source more parts. Good news on the one piece sides and possible bodyshell formats going forwards though, good luck. Currently adding cab windows and preparing the side glazing. Need to get undercarriage parts next. 3 Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted September 12, 2018 RMweb Gold Share Posted September 12, 2018 i have not been active on Ebay for a few weeks as I’m looking to put my class 507-315 parts and other parts onto a web site, I am thinking of abandoning Ebay as the fees are ridiculous, if anyone needs any parts my e-mail address is Andrew.marsland@live.co.uk Delivery time can be around a week from ordering as I do all the resin casting myself. The kit used to come as 3 pieces per body side as was on this model Danny built but it now comes as one piece bodysides, I am also thinking of doing fully built bodyshells, and possibly painted ones, The only thing I need to do is get the underframe components designed and then everything for the kit is done, the floors and bogie side frames have been available for the last month or so. Can you put a price list up in this thread (and the other 507/508 thread maybe) for the new updated sides, still fancy doing a misery rail 508 Link to post Share on other sites More sharing options...
piranha230 Posted September 12, 2018 Share Posted September 12, 2018 Hi Jim, if you send me an e-mail to Andrew.marsland@live.co.uk stating the parts that you need I can work out a generous discount on the prices. Link to post Share on other sites More sharing options...
Lyddrail Posted September 12, 2018 Share Posted September 12, 2018 Not sure on the exact date/time but all the research shows it as being during their NSE phase as I have pics with and without. 313001 when first in NSE was without but I also have pics with so I can only assume it was between 88 and 93 lol. I trust your research, I only have a limited number of pics. Thanks. Cheers. 1 Link to post Share on other sites More sharing options...
Guest teacupteacup Posted September 14, 2018 Share Posted September 14, 2018 Nice window etches, are they from Rubyrocco76 or your own production? The etched frames are from PPD Ltd, reorder code 24905. Cost circa £21 MC Regarding the window etches, are there any spare cab window frames on the etches? I'd love to do a 314, these have an additional small window each side under the pantograph Link to post Share on other sites More sharing options...
pdanny Posted September 14, 2018 Author Share Posted September 14, 2018 Nice window etches, are they from Rubyrocco76 or your own production? The etched frames are from PPD Ltd, reorder code 24905. Cost circa £21 MC Regarding the window etches, are there any spare cab window frames on the etches? I'd love to do a 314, these have an additional small window each side under the pantograph Hey, thanks for the like. The window frames are produced by PPD Ltd and on the sheet that I had produced, there isn't an extra window as per the 314s I'm afraid. Try contacting the original vendor for the kits as he may produce them. Link to post Share on other sites More sharing options...
Natalie Posted September 16, 2018 Share Posted September 16, 2018 (edited) Long time admirer of your work. Doing the 457 with Kelly. One of the stumbling blocks is the need to have mk3 type windows with letter box vents above. Our initial source is no longer available so we need to get some etched but lack the measurements of the windows to do so. Despite 67300 being about 3 miles away when at the ERM we never measured those windows. I did the phase 3 components but that is all. But back to your awesome models. Can I be permitted to make a small comment about your 313? On the first 10 units the roof vents are larger. Additionally as I am sure that you are already aware of is that some units in NSE had no black or a reduced amount on the yellow ends. Looking forward to your next project- maybe a 455/7? Edited September 17, 2018 by Natalie 1 Link to post Share on other sites More sharing options...
pdanny Posted September 16, 2018 Author Share Posted September 16, 2018 Long time admirer of your work. Doing the 457 with Kelly. One of the stumbling blocks is the need to have mk3 type windows with letter box vents above. Our initial source is no longer available so we need to get some etched but lack the measurements of the windows to do so. Despite 67300 being about 3 miles away when at the ERM we never measured those windows. I did the phase 3 components but that is all. But back to your awesome models. Can I be permitted to make a small comment about your 313? On the first 10 units the roof vents are larger. Additionally as I am sure that you are already aware of is that some units in NSE had no black or a reduced amount on the yellow ends. Looking forward to your next project- maybe a 455/7?Long time admirer of your work. Doing the 457 with Kelly. One of the stumbling blocks is the need to have mk3 type windows with letter box vents above. Our initial source is no longer available so we need to get some etched but lack the measurements of the windows to do so. Despite 67300 being about 3 miles away when at the ERM we never measured those windows. I did the phase 3 components but that is all. But back to your awesome models. Can I be permitted to make a small comment about your 313? On the first 10 units the roof vents are larger. Additionally as I am sure that you are already aware of is that some units in NSE had no black or a reduced amount on the yellow ends. Looking forward to your next project- maybe a 455/7? Hey thanks. Really appreciate the feedback. Yes, on the vents. You are correct. The vents aren't available yet so waiting and looking at scratchbuild options. I have plenty of other things to do first but it is on my list of things to do. On 313001, I'm working from photos so the black around the cabs is correct to this unit. I always wanted to model the 457 but I would rather do it in its original format as a class 210. I saw them at Reading in the 80s roaring through on the down fast at speed and was captivated by it. On the windows, they are Mk3 windows with a hopper section laid above so measurements wise, I would perceive them to be the same as the 455s in width. PPD Ltd would etch them for you if you can give them dimensions. Link to post Share on other sites More sharing options...
piranha230 Posted September 18, 2018 Share Posted September 18, 2018 Did you try messaging Jim smith wright from p4newst.com. He did the etched window frames more than 10 years ago suitable for the class 210 or class 317,457 etc, I seem to recall that someone asked if the etches could still be obtained on the Demu forum a few years ago and he mentioned he could order them. 1 Link to post Share on other sites More sharing options...
Kelly Posted September 18, 2018 Share Posted September 18, 2018 Did you try messaging Jim smith wright from p4newst.com. He did the etched window frames more than 10 years ago suitable for the class 210 or class 317,457 etc, I seem to recall that someone asked if the etches could still be obtained on the Demu forum a few years ago and he mentioned he could order them. I have previously. He unfortunately hasn't anymore left, he said he could order some but wasn't sure when he'd be able to do so iirc. I'll have a word with him again maybe at Scaleforum at the weekend. 1 Link to post Share on other sites More sharing options...
piranha230 Posted September 21, 2018 Share Posted September 21, 2018 I am doing discounted prices cheaper than Ebay for the class 507-315 emu parts. Prices are as follows. Cab fronts and inner ends £10.00 each specify when ordering which type eg pantograph coach end. Any type of body side each version is correct to each type of unit £12 each or a pair for £22.00 Floors £10 each Window frame etches £25 per 3 car unit or £35 per 4 car unit. Each type is specific per unit type Bogie sets £6.00 for 4 sideframes enough for one coach. These prices are a good saving compared to buying on Ebay. To order I take payment at Andrew.marsland@live.co.uk that is my paypal address and e-mail address. I just need to get the underframe parts 3d designed and the various types of seating done eg original type low back seats and newer type high back seats. I am also looking for someone who can finish the 3d design ( my current designer takes too long) and someone who can draw the units and who can do instructions on where the parts go and how to assemble each unit. I am doing discounted prices cheaper than Ebay for the class 507-315 emu parts. Prices are as follows. Cab fronts and inner ends £10.00 each specify when ordering which type eg pantograph coach end. Any type of body side each version is correct to each type of unit £12 each or a pair for £22.00 Floors £10 each Window frame etches £25 per 3 car unit or £35 per 4 car unit. Each type is specific per unit type Bogie sets £6.00 for 4 sideframes enough for one coach. These prices are a good saving compared to buying on Ebay. To order I take payment at Andrew.marsland@live.co.uk that is my paypal address and e-mail address. I just need to get the underframe parts 3d designed and the various types of seating done eg original type low back seats and newer type high back seats. I am also looking for someone who can finish the 3d design ( my current designer takes too long) and someone who can draw the units and who can do instructions on where the parts go and how to assemble each unit. Link to post Share on other sites More sharing options...
piranha230 Posted September 21, 2018 Share Posted September 21, 2018 Driving coach roofs centre coach roofs and pantograph coach roofs are £10 each, everything is sent 1st class signed for depending on the order value . Delivery time is roughly a week for resin castings and up to 2 weeks for etchings. Link to post Share on other sites More sharing options...
piranha230 Posted September 21, 2018 Share Posted September 21, 2018 i Am also hoping to get some cab ends done with revised light clusters eg for the merseyrail refurbished units and the class 315 with the newer style lights. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now