RMweb Gold ianLMS Posted September 12, 2018 RMweb Gold Share Posted September 12, 2018 Notified last night that the order is in the post - good news and a very nice note from Alan thanking me for my patience. To be honest, 2-3 week turn-around is pretty good in my books for such exceptional quality made-to-order items, even better adding in the fact that he was away on holiday and was dealing with many back-orders. Thanks Ian Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted September 13, 2018 RMweb Gold Share Posted September 13, 2018 Well chuffed with the fab four.. 3 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted October 14, 2018 RMweb Premium Share Posted October 14, 2018 Some of the latest scans, if you’re at GETS in Milton Keynes today Modelu are on the first floor balcony 2 Link to post Share on other sites More sharing options...
Nimbus Posted October 14, 2018 Share Posted October 14, 2018 Some of the latest scans, if you’re at GETS in Milton Keynes today Modelu are on the first floor balcony Impressive detail resolution. What scales are these? The Nim. Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted October 14, 2018 RMweb Gold Share Posted October 14, 2018 253AEB2E-D3B7-4CAE-989C-4B01D6BE4922.jpeg Some of the latest scans, if you’re at GETS in Milton Keynes today Modelu are on the first floor balcony HEYYYYYYYY MACARENA!! 1 Link to post Share on other sites More sharing options...
Smiffy2 Posted October 14, 2018 Share Posted October 14, 2018 (edited) Impressive detail resolution. What scales are these? The Nim. 7mm and 54mm. 1/43 and 1/32 >edited due to faltering memory< Edited October 14, 2018 by Smiffy2 Link to post Share on other sites More sharing options...
Smiffy2 Posted October 14, 2018 Share Posted October 14, 2018 I like those very much. Sometimes the facial detail gets a bit blurred or vague on 7mm figures, but those seem very crisp. Should be a delight to paint. I'm toying with the idea of having a Sam Vimes scan done. All I need is a model, a costume and £25! Link to post Share on other sites More sharing options...
alanbuttler Posted October 14, 2018 Author Share Posted October 14, 2018 (edited) Impressive detail resolution. What scales are these? The Nim. Thanks! These are 1/32nd and 7mm, this image also has 4mm (printed on my old hardware) Edited October 14, 2018 by alanbuttler 8 Link to post Share on other sites More sharing options...
Tom F Posted October 14, 2018 Share Posted October 14, 2018 Thanks! These are 1/32nd and 7mm, this image also has 4mm (printed on my old hardware) 20181014_141754.jpg Game changer! Stunning work Al! Link to post Share on other sites More sharing options...
Mike Storey Posted October 23, 2018 Share Posted October 23, 2018 Does the tech allow these to be reproduced in 1/19 or at least 1/24, for garden railways (or Gauge 1)? There is a pretty limited range out there right now, between cartoonish and Bachmann's lifelike, but small range. Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted October 23, 2018 RMweb Gold Share Posted October 23, 2018 Just posted this today... Figures are mainly Modelu with a couple of Bachmann - which I'm sure you can spot. http://www.rmweb.co.uk/community/index.php?/topic/138684-gare-de-brindille/&do=findComment&comment=3341123 3 Link to post Share on other sites More sharing options...
Mike Storey Posted October 23, 2018 Share Posted October 23, 2018 Just posted this today... Figures are mainly Modelu with a couple of Bachmann - which I'm sure you can spot. http://www.rmweb.co.uk/community/index.php?/topic/138684-gare-de-brindille/&do=findComment&comment=3341123 Just posted this today... Figures are mainly Modelu with a couple of Bachmann - which I'm sure you can spot. http://www.rmweb.co.uk/community/index.php?/topic/138684-gare-de-brindille/&do=findComment&comment=3341123 Outstanding Gibert. But I cannot find any figures on ModelU at greater than 1/32, and most no larger than 1/43. Were yours a special order? 1 Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted October 23, 2018 RMweb Gold Share Posted October 23, 2018 (edited) I spoke to Alan at T2TT in July - there was no difficulty in getting the 1/19 figures - I ordered 5 and they arrived shortly afterwards. He certainly knew that decent figures are an issue in this scale. Edited October 23, 2018 by Gilbert 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted October 23, 2018 RMweb Premium Share Posted October 23, 2018 Does the tech allow these to be reproduced in 1/19 or at least 1/24, for garden railways (or Gauge 1)? There is a pretty limited range out there right now, between cartoonish and Bachmann's lifelike, but small range. Yes the tech allows figures to be printed to special order in larger scales including Gauge1, worth emailing Alan to discuss. The quality of the large prints is good. Link to post Share on other sites More sharing options...
Mike G Posted October 23, 2018 Share Posted October 23, 2018 Just had my scanned figures after Scaleforum. Well worth the wait absolutely thrilled! Thanks so much Alan!! Mike Link to post Share on other sites More sharing options...
alanbuttler Posted November 8, 2018 Author Share Posted November 8, 2018 Outstanding Gibert. But I cannot find any figures on ModelU at greater than 1/32, and most no larger than 1/43. Were yours a special order? Hi Mike, I'm in process of adding 1/32nd as scale to all products, I'm not quite ready to do the same for G scale, 1/24th and 16mm. I need to have the production capacity to deal with adding those options first, which I hope to sort in the new year. In the meantime I'll be able to offer all the larger scales as special orders but note that they will have a longer lead time. I'm really looking forward to producing the larger scales though, the last batch of 16mm figures I printed in grey resin looked super. 14 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted November 8, 2018 RMweb Gold Share Posted November 8, 2018 I think we need to see some painted by Claudia! Link to post Share on other sites More sharing options...
alanbuttler Posted November 8, 2018 Author Share Posted November 8, 2018 (edited) I'm happy to announce the first of a number of batches of new figures. Firstly we have 5 Edwardian era Policemen created with the kind assistance of David Brandreth. These are available now in scale 2mm-1/32nd and can be found on the Modelu website here https://www.modelu3d.co.uk/product-category/finescale-figures/trade-and-services/police/ The figure posed holding a bike has been designed to compliment the Southwark Models etched brass bikes available from Roxey Mouldings The second release is a number of colliery themed figures to complement the existing range of Industrial Workmen. These include shunters in high vis with hard hats (with thanks to Andy Hardy) and three miners, scanned at the Apedale Railway. These are available in the Industrial section of the website. The next release will be a large range of contemporary figures selected from the 4 years worth of scans taken at exhibitions and clubs. Once permission for use has been obtained the range will include: - Seated passengers - People using handheld devices, taking phone photos, reading, taking notes - Male passengers waiting - Female passengers waiting - Kids and teenagers - Couples arm-in-arm - Photographers The majority of these figures will suit the modern era, though there are a number of additional figures suitable for the Edwardian and post-war period which will be added. Edited November 8, 2018 by alanbuttler 12 Link to post Share on other sites More sharing options...
PenrithBeacon Posted November 8, 2018 Share Posted November 8, 2018 The figure of a policeman with a bike reminded me of WSC! 1 Link to post Share on other sites More sharing options...
sem34090 Posted November 8, 2018 Share Posted November 8, 2018 (edited) Brilliant - Once the layout is built I think we'll be needing Sgt Barnes and some of his men near Blackstone West station waiting to either talk with or to intercept the Shadowy Missenden, perhaps (in)ably assisted by Inspector Johnson of Hastings... Incidentally, are some later 'coppers planned? I could do with a few later ones (even better if you're able to do WWII era policemen with tin 'ats, and perhaps ARP personnel, for that period.) in addition to civillians. Actually, we need a passenger in a long overcoat, with a suitably face-hiding hat, an Edwardian, to pose as the aforementioned Shadowy Missenden... Edited November 8, 2018 by sem34090 1 Link to post Share on other sites More sharing options...
Spannerman Posted November 8, 2018 Share Posted November 8, 2018 The policemen are fantastic although a tad early for me but it set me thinking, would it be worth your time taking your scanning equipment to one of the many 1940s themed events at a heritage railway. I'm aware that not all the outfits are correct but some of the people do go to an extreme effort to get things correct. Just a thought. AT Nik 4 Link to post Share on other sites More sharing options...
sem34090 Posted November 8, 2018 Share Posted November 8, 2018 The policemen are fantastic although a tad early for me but it set me thinking, would it be worth your time taking your scanning equipment to one of the many 1940s themed events at a heritage railway. I'm aware that not all the outfits are correct but some of the people do go to an extreme effort to get things correct. Just a thought. AT Nik Oooo... It'd be lovely to see you turn up at the Mid Hants for the War on the Line 'Christmas Leave' event, Mr Butler! You'd have to probably ask the management though - It's not for a humble porter to invite you! Link to post Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted November 9, 2018 RMweb Premium Share Posted November 9, 2018 Well you have scanned half of the Basingstoke Bodgers already. Maybe we can get the other half scanned at Warley 2 Link to post Share on other sites More sharing options...
Porcy Mane Posted November 9, 2018 Share Posted November 9, 2018 (edited) Nice to see the mineworker wearing his self rescuer. If I could perhaps make a pedantic point. The cap lamp would rarely be seen worn on the helmet around a mine surface. (where I assume most model minworkers will be seen). In the main, the lamp head would be attached to the helmet at the workplace when both hands needed to be free. The norm was to carry the lamphead or if not switched on to have the cable looped through a waist belt or draped around the neck. The "etiquette" of wearing one's cap lamp was one of the first rules learnt by a new start as when worn on the helmet it could dazzle others when in conversation. Lamp heads also had "Dim-Dip" settings. This 1977 photograph illustrates what I'm babbling on about, Sadly most of these fine fellows are no longer with us. Those that are, are somewhat more portly. https://www.alamy.com/stock-photo-mr-tom-mcguinness-at-the-pithead-of-his-colliery-near-bishop-auckland-20357554.html?pv=1&stamp=2&imageid=A72A72C6-3AFA-4937-9BD2-2552FD29C7BB&p=62486&n=0&orientation=0&pn=1&searchtype=0&IsFromSearch=1&srch=foo%3dbar%26st%3d0%26pn%3d1%26ps%3d100%26sortby%3d2%26resultview%3dsortbyPopular%26npgs%3d0%26qt%3dtom%2520mcguinness%26qt_raw%3dtom%2520mcguinness%26lic%3d3%26mr%3d0%26pr%3d0%26ot%3d0%26creative%3d%26ag%3d0%26hc%3d0%26pc%3d%26blackwhite%3d%26cutout%3d%26tbar%3d1%26et%3d0x000000000000000000000%26vp%3d0%26loc%3d0%26imgt%3d0%26dtfr%3d%26dtto%3d%26size%3d0xFF%26archive%3d1%26groupid%3d%26pseudoid%3d%26a%3d%26cdid%3d%26cdsrt%3d%26name%3d%26qn%3d%26apalib%3d%26apalic%3d%26lightbox%3d%26gname%3d%26gtype%3d%26xstx%3d0%26simid%3d%26saveQry%3d%26editorial%3d1%26nu%3d%26t%3d%26edoptin%3d%26customgeoip%3d%26cap%3d1%26cbstore%3d1%26vd%3d0%26lb%3d%26fi%3d2%26edrf%3d%26ispremium%3d1%26flip%3d0 The photo also illustrates the point that only one man "2nd from left" is is wearing an overall/boiler suit. Generally prior to the introduction of the NCB safetywear (orange) scheme in 1978/9 miners wore clothes brought from home and that very often included a tweed type jacket & waistcoat. In this case the man wearing a boiler suit is a 2nd year apprentice fitter just about to start his 20 days coal face and escape airway training. The NCB would supply Oilskins for those "Working Wet" and Donkey Jackets for those working in adverse conditions. In the main, those wearing overalls (blue) would be fitters, electricians and management. A colliery manager when making an underground visit would traditionally be distinguished by wearing a white silk scarf worn cravatte style with his boiler suit and carrying a highly polished flame safety lamp plus a yardstick (also painted white if he really liked to be noticed). The second pic in this group of ten again shows typical miners attire for the mid 1970's. We see Mr Wilkinson wearing his muffler at the end of his shift in 1974. It could be a chilly journey after a sweaty shift at the coalface coming back to the surface. In this case walking up steep drifts of 1 in 3 & riding on conveyor belts of damp coal for a few of miles against the coal wind of ventilation If it was winter there could be icicles at the shaft bottom due to wind chill and you could be waiting for up to fifteen minutes to get in a cage. After release from the eight man (Bent Double) cage ascent, there was still the run of a half a mile or so and mostly in the open to the pit head baths. https://www.thenorthernecho.co.uk/history/fromthearchive/15009036.pictures-bowburn-and-coxhoe-from-the-northern-echo-archives/#gallery1 There is a glimpse in this BFI clip at 2':41' of the type of clothing worn. P P.s. Most collieries had some splendid examples of lamp posts in the exchange sidings. Edited November 9, 2018 by Porcy Mane Link to post Share on other sites More sharing options...
hmrspaul Posted November 9, 2018 Share Posted November 9, 2018 (edited) Nice to see the mineworker wearing his self rescuer. If I could perhaps make a pedantic point. The cap lamp would rarely be seen worn on the helmet around a mine surface. (where I assume most model minworkers will be seen). In the main, the lamp head would be attached to the helmet at the workplace when both hands needed to be free. The norm was to carry the lamphead or if not switched on to have the cable looped through a waist belt or draped around the neck. The "etiquette" of wearing one's cap lamp was one of the first rules learnt by a new start as when worn on the helmet it could dazzle others when in conversation. Lamp heads also had "Dim-Dip" settings. This 1977 photograph illustrates what I'm babbling on about, Sadly most of these fine fellows are no longer with us. Those that are, are somewhat more portly. The photo also illustrates the point that only one man "2nd from left" is is wearing an overall/boiler suit. Generally prior to the introduction of the NCB safetywear (orange) scheme in 1978/9 miners wore clothes brought from home and that very often included a tweed type jacket & waistcoat. In this case the man wearing a boiler suit is a 2nd year apprentice fitter just about to start his 20 days coal face and escape airway training. The NCB would supply Oilskins for those "Working Wet" and Donkey Jackets for those working in adverse conditions. In the main, those wearing overalls (blue) would be fitters, electricians and management. A colliery manager when making an underground visit would traditionally be distinguished by wearing a white silk scarf worn cravatte style with his boiler suit and carrying a highly polished flame safety lamp plus a yardstick (also painted white if he really liked to be noticed). The second pic in this group of ten again shows typical miners attire for the mid 1970's. We see Mr Wilkinson wearing his muffler at the end of his shift in 1974. It could be a chilly journey after a sweaty shift at the coalface coming back to the surface. In this case walking up steep drifts of 1 in 3 & riding on conveyor belts of damp coal for a few of miles against the coal wind of ventilation If it was winter there could be icicles at the shaft bottom due to wind chill and you could be waiting for up to fifteen minutes to get in a cage. After release from the eight man (Bent Double) cage ascent, there was still the run of a half a mile or so and mostly in the open to the pit head baths. There is a glimpse in this BFI clip at 2':41' of the type of clothing worn.P P.s. Most collieries had some splendid examples of lamp posts in the exchange sidings. That is a splendid posting. However, it does illustrate well how difficult it will be to provide suitably clad models for any era. Official clothing changed a lot in the past 50 years as there was slow progress to higher H&S. Giving a date for such a change for one industry is great, but when did the railway workers start wearing safety vests? - and in larger scales these changed buttons from ordinary to thick rubber (or was it the other way around?). All too many layouts have railway workers clad entirely in orange which to me is relatively new cladding. As to hair - wow I just love those young miners and their locks. Mine were shorn for joining the Civil Service in 1974. Again did the H&S people put a stop to that, or simply fashion? Now all too many have no hair at all. I would estimate the present near hairless style became more common (and not a sign of being a Bovver boy) c 1992 - I found it very unnerving working closely with middle stream Civil Servants with crew cuts which had been far less acceptable than my long hair (which had partially returned by then). The police were similar - those capes I've never seen, but look at a copper now - usually flat capped (which was introduced for those running around in Panda cars I believe) but a belt laden with 'tools of the trade'. With so much interest in the 60s steam/diesel era some more plainly dressed police may be popular. Good luck to you at Modelu but you have opened a mares nest of detail! And that is without how our bodies have altered and how they varied in different parts of the country. As an example the Diddy men weren't a Ken Dodd fiction, Liverpool people were noticeably shorter when I went there in 1970 (and my mum was from the Pool and was all of 5ft 1in. ). I would suggest most working men were quite slight - except for drivers who spread then as they do now Paul Edited November 9, 2018 by hmrspaul 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now