RMweb Gold Godfrey Glyn Posted September 23, 2017 RMweb Gold Share Posted September 23, 2017 Getting on for 9 months and no birth yet. So, as I shall die before this happens it will be Comet or Bill Bedford sides on the carppy Bachman sides if ICBA. Yes, I know the Baccy sides ar a little short but I don't care any more. L.A.Y. Zeebastard Have faith, they will come! They must know it makes sense. 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted September 23, 2017 RMweb Gold Share Posted September 23, 2017 (edited) Need more catering vehicles.... Though I wouldn't say no to a Tavern car, even if from the outside there's not much you can see of the inside. Bulleids would be nice, if they included lights, lights through the tiny tavern car window would be a little quaint too. Edited September 23, 2017 by adb968008 Link to post Share on other sites More sharing options...
trevor7598 Posted September 23, 2017 Share Posted September 23, 2017 Of course they will come. Post war coaches of three of the big four have been produced to modern standards, that just leaves the post war SR. What is more, there is a large choice of Bulleid coach types/styles for a manufacturer to choose from. Hornby are asleep on this one, considering they've had Bulleid pacifics in their range for years now. Also Maunsell restaurant car anyone ?. Link to post Share on other sites More sharing options...
robertcwp Posted September 23, 2017 Share Posted September 23, 2017 Need more catering vehicles.... Though I wouldn't say no to a Tavern car, even if from the outside there's not much you can see of the inside. Bulleids would be nice, if they included lights, lights through the tiny tavern car window would be a little quaint too. Tavern Car trailers, ie the restaurant composites, spent the vast majority of their lives with proper windows. S7836S_SotonC_20-5-67 by Robert Carroll, on Flickr 7 Link to post Share on other sites More sharing options...
RMweb Premium Ian J. Posted September 23, 2017 RMweb Premium Share Posted September 23, 2017 I say start at the beginning and do 59' multidoor stock, then move on to later ones in chronological order. That way I get my S&DJR sets first...! 1 Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted September 23, 2017 RMweb Gold Share Posted September 23, 2017 Of course they will come. Post war coaches of three of the big four have been produced to modern standards, that just leaves the post war SR. What is more, there is a large choice of Bulleid coach types/styles for a manufacturer to choose from. Hornby are asleep on this one, considering they've had Bulleid pacifics in their range for years now. Also Maunsell restaurant car anyone ?. If Hornby had to choose between doing their Maunsell range or embarking on a selection of Bulleid stock first, they probably picked correctly. Don't forget that the first Bulleid coaches didn't appear until 1946, so only Maunsell stock is appropriate to run with the air-smoothed MNs they made in very early condition. Apart from a very few used as travelling HQs for prominent figures, Pullmans were stored throughout the war. John Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted September 24, 2017 RMweb Premium Share Posted September 24, 2017 Getting on for 9 months and no birth yet. So, as I shall die before this happens it will be Comet or Bill Bedford sides on the carppy Bachman sides if ICBA. Yes, I know the Baccy sides ar a little short but I don't care any more. L.A.Y. Zeebastard I have to concur old chap. R.C. Farmer Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted September 24, 2017 RMweb Gold Share Posted September 24, 2017 Having recently picked up on ebay more than a dozen metal Bulleids, painted and signed by Larry Goddard, at average prices rather less than twice that of new Hornby Maunsells, I can’t see too much of a need right now....... 1 Link to post Share on other sites More sharing options...
RMweb Premium New Haven Neil Posted September 24, 2017 RMweb Premium Share Posted September 24, 2017 Having recently picked up on ebay more than a dozen metal Bulleids, painted and signed by Larry Goddard, at average prices rather less than twice that of new Hornby Maunsells, I can’t see too much of a need right now....... #officially jealous# Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 24, 2017 RMweb Premium Share Posted September 24, 2017 Getting on for 9 months and no birth yet. So, as I shall die before this happens it will be Comet or Bill Bedford sides on the carppy Bachman sides if ICBA. Yes, I know the Baccy sides ar a little short but I don't care any more. L.A.Y. Zeebastard Mainline MK1s are the thing to use for conversions using sides I'm told. Phil Link to post Share on other sites More sharing options...
145 Squadron Posted September 25, 2017 Share Posted September 25, 2017 Mainline MK1s are the thing to use for conversions using sides I'm told. Phil Or the Hachette coaches if you can still find them. Tony 1 Link to post Share on other sites More sharing options...
SRman Posted September 25, 2017 Share Posted September 25, 2017 (edited) The "trick" with the Mainline Mk1 coaches is that they have a slightly lower gutter ridge. Mounting the Bulleid brass sides with the top on that gutter line moves the upper sides outwards slightly, giving a better representation of the classic Bulleid profile. Of course, one can simulate that on the other manufacturers' Mk1s by simply gluing a length of microstrip along just below the gutters. Edited September 25, 2017 by SRman Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted September 25, 2017 RMweb Gold Share Posted September 25, 2017 Having recently picked up on ebay more than a dozen metal Bulleids, painted and signed by Larry Goddard, at average prices rather less than twice that of new Hornby Maunsells, I can’t see too much of a need right now....... Full metal jacket......impressive...even more impressive is their pedigree. Question......given their weight (but allowing for smooth running wheelsets ) which r-t-r locos can haul a reasonable rake of them ? Just interested to know. Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 25, 2017 RMweb Premium Share Posted September 25, 2017 Full metal jacket......impressive...even more impressive is their pedigree. Question......given their weight (but allowing for smooth running wheelsets ) which r-t-r locos can haul a reasonable rake of them ? Just interested to know. RTR would be interesting, however I have a Kit built original West Country that would probably cope, but it is only DC at the moment and it would need a motor change before going DCC. TW has offered to do that for me as it was his loco! Such generosity between mates. Phil Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 25, 2017 RMweb Premium Share Posted September 25, 2017 Having recently picked up on ebay more than a dozen metal Bulleids, painted and signed by Larry Goddard, at average prices rather less than twice that of new Hornby Maunsells, I can’t see too much of a need right now....... Where do you find such gems Dudds? All I can find on Ebay these days is carp piles of dross (possibly 'cause you have filched all the good stuff). Phil Link to post Share on other sites More sharing options...
Iltman Posted September 25, 2017 Share Posted September 25, 2017 I suspect that it's more likely that Bachmann will be the first to produce 4mm Bullieds. Remember that they've already done the research for the 1951 stock so it would be a matter of new tooling. I wouldn't be entirely surprised also if we saw a U from them as well, I remember speaking to their rep not long after the N came out and he sais that they had done the research but as sales for the N were disappointing they wouldn't be going ahead. Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted September 25, 2017 RMweb Gold Share Posted September 25, 2017 Full metal jacket......impressive...even more impressive is their pedigree. Question......given their weight (but allowing for smooth running wheelsets ) which r-t-r locos can haul a reasonable rake of them ? Just interested to know. The bogies do run, but not as sweetly as modern plastic ones. All are currently fitted with screw couplings, and will eventually be given Kadees. Weight is not much of an issue. Oddly, one composite has a number - 5731 - that Southern never used, and that is being used as a mule to sort the optimum arrangement for Kadees. It also has a bogie that 'loses' one axle, so some use of Bachmann Bulleid bogies will be needed there. I am unlikely to run more than 6 in one rake. Where do you find such gems Dudds? All I can find on Ebay these days is carp piles of dross (possibly 'cause you have filched all the good stuff). Phil I simply have 'Goddard" as an ebay search in OO Gauge, and the same seller 'Edwintrain' turned up trumps several times. He was also selling exotic stuff like Liverpool Overhead Railway vehicles, and some prices were rather higher than for the Bulleids. I got lucky, that's all. My final purchase was four fine blood and custard Bulleids for £210. I see he has a Silver Jubilee and seven coaches, built by Michael Edge, right now. For nearly five times that amount, mind! 1 Link to post Share on other sites More sharing options...
GeoffBird Posted September 25, 2017 Share Posted September 25, 2017 Have faith, they will come! They must know it makes sense. Not just for Southern Region modellers. Remember that they were also used on the Eastern (GC, GN & GE sections) and on the Midland as well for a short time. I would like a couple of blood and custard Tavern cars behind my Prince Palatine on the "Master Cutler". Link to post Share on other sites More sharing options...
RMweb Premium Mallard60022 Posted September 26, 2017 RMweb Premium Share Posted September 26, 2017 Not just for Southern Region modellers. Remember that they were also used on the Eastern (GC, GN & GE sections) and on the Midland as well for a short time. I would like a couple of blood and custard Tavern cars behind my Prince Palatine on the "Master Cutler". That reminds me of the Gresley/Eastleigh convesrions of 1955. They were on the Midland first of all I seem to remember. Phil Link to post Share on other sites More sharing options...
phil gollin Posted September 26, 2017 Share Posted September 26, 2017 (edited) . I think the Bulleid Tavern Cars as "one offs" (well "eight offs") are really more in the realm of the Rails/Rapido one-off LNER dynamometer car. They won't interest even most Southern Railway/Region fans, and are an oddity. Their detailing and livery would help justify their high costs. However, back in the real world, further livery variants in Hornby's existing excellent Maunsell coaches would be popular (and "cheap"). . Edited September 26, 2017 by phil gollin Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted September 26, 2017 RMweb Gold Share Posted September 26, 2017 . I think the Bulleid Tavern Cars as "one offs" (well "eight offs") are really more in the realm of the Rails/Rapido one-off LNER dynamometer car. They won't interest even most Southern Railway/Region fans, and are an oddity. Their detailing and livery would help justify their high costs. However, back in the real world, liveries in Hornby's existing excellent Maunsell coaches would be popular (and "cheap"). . Agree...but really no substitute for newly tooled Bulleids.They are long,long overdue. Link to post Share on other sites More sharing options...
trevor7598 Posted September 26, 2017 Share Posted September 26, 2017 Agree...but really no substitute for newly tooled Bulleids.They are long,long overdue. They are long overdue. Hornby even produced a 2HAL, surely more obscure, and less commercial than Bulleid steam stock. Another advantage for a manufacturer, of say ,a Bulleid 3 car set is that only two sets of tools would be required, as both brakes were identical. There is also a good selection of prototypes, in preservation, to scan/measure etc. Link to post Share on other sites More sharing options...
phil gollin Posted September 26, 2017 Share Posted September 26, 2017 Agree...but really no substitute for newly tooled Bulleids.They are long,long overdue. . Yes, but Hornby should be wary - the Bulleid coaches were previously done by Bachman - they MIGHT take it badly if Hornby try to "poach" them. Having said that the coaches are long overdue for an update to decent modern standards - but the tavern sets are unlikely to be in Bachman sights even if they do produce a decent set of Bulleid corridor coaches. . . Link to post Share on other sites More sharing options...
RMweb Premium phil-b259 Posted September 26, 2017 RMweb Premium Share Posted September 26, 2017 They are long overdue. Hornby even produced a 2HAL, surely more obscure, and less commercial than Bulleid steam stock. Another advantage for a manufacturer, of say ,a Bulleid 3 car set is that only two sets of tools would be required, as both brakes were identical. There is also a good selection of prototypes, in preservation, to scan/measure etc. A couple of decades ago you might have had a point, however as the increasing number of 3rd rail layouts shows that is not the case today. Also the 2HALs were not 'obscure' by any means, being found on all 3 sections of the SR over the years. As has been noted before the Southern did not build any new suburban coach / loco designs preferring to invest in electrification and thus the 2HAL is in essence no different to Hornby producing the Fowler / Stainer 2-6-4T and LMS suburban coaches in recent years Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted September 26, 2017 RMweb Gold Share Posted September 26, 2017 (edited) . Yes, but Hornby should be wary - the Bulleid coaches were previously done by Bachman - they MIGHT take it badly if Hornby try to "poach" them. Having said that the coaches are long overdue for an update to decent modern standards - but the tavern sets are unlikely to be in Bachman sights even if they do produce a decent set of Bulleid corridor coaches. . . Bachmann (who almost completely ignored the Southern for the first 80% of their existence) probably only ever did the Bulleids because Airfix had already done the donkey work on them. It's likely that they have been anticipating Hornby to jump on them since about 2001 or they would have got their finger out long ago. The problem for us, I think, is that each of them have been expecting the other to do something...... Maybe Oxford Rail will beat them both to it. John Edited September 26, 2017 by Dunsignalling Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now