RMweb Premium MJI Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 6 Link to post Share on other sites More sharing options...
Signaller69 Posted February 12, 2021 Author Share Posted February 12, 2021 2 hours ago, Legend said: Hi Guys I don’t think I posted this before on this thread. But just in case anyone interested , Silver Fox are producing kits for 126 Ayrshire and The original Edinburgh & Glasgow sets . They are also producing cab ends . Sorry for taking the easy way out but as well as ordering a kit I’ve ordered cab ends for my Trix coach conversion . I had been worried about how I would achieve the cab ends and this seems an easy way out . Give added impetus to the project now which has occasional bursts of activity ! . That's interesting, I hadn't heard about that. The dilemma is if I get one it will no doubt show up the errors on my 2 sets. Hey ho, will have to think about that one! Good that they are doing them though. 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 1 minute ago, Signaller69 said: That's interesting, I hadn't heard about that. The dilemma is if I get one it will no doubt show up the errors on my 2 sets. Hey ho, will have to think about that one! Good that they are doing them though. Or vice versa. The body profile between Swindon and Mark 1 is slightly different. SF use Mark 1 shells. Also the sides do look a little 2D Even if it was better than my WR sets or your collection of 126s at least we can say they are ours. 1 1 Link to post Share on other sites More sharing options...
Signaller69 Posted February 12, 2021 Author Share Posted February 12, 2021 1 hour ago, coronach said: I drill and solder in brass lacing pins, with the pin heads suitably squeezed using pliers and filed to shape. Very neat, not much chance of them falling off when handling either! Trying to solder etched hinges into place would fill me with trepidation, but your solution looks more manageable, if I can drill holes in the right places.... Link to post Share on other sites More sharing options...
Signaller69 Posted February 12, 2021 Author Share Posted February 12, 2021 3 minutes ago, MJI said: Or vice versa. The body profile between Swindon and Mark 1 is slightly different. SF use Mark 1 shells. Also the sides do look a little 2D Even if it was better than my WR sets or your collection of 126s at least we can say they are ours. This is true. I used Mk.1s for mine, Trix of course, so the body profile is slightly out. Hopefully SF don't use Mk.1 sized windows. Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 I only started mine as the windows are the same size as the 120 cross country. 1 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 39 minutes ago, Signaller69 said: This is true. I used Mk.1s for mine, Trix of course, so the body profile is slightly out. Hopefully SF don't use Mk.1 sized windows. Check their Trans Pennine should be similar to that Link to post Share on other sites More sharing options...
LNERGE Posted February 12, 2021 Share Posted February 12, 2021 8 hours ago, Signaller69 said: One of the jobs I like least with etched kits is adding door hinges. Just cutting them off the fret without them flying off into thin air is bad enough, but picking the things up and dropping them in exactly the right place on the model I find a particular test of patience. My method for fixing them in place is to place them on the body then use a drop of acrylic varnish as a fixative, using the point of a small paint brush to move the hinge into place. If anyone knows an easier method I'm all ears! I pick them up with a new sharp knife blade. I found that if you applied slight pressure the blade cut in and stuck enough to pick each one up. I use a piece of wire to place a small dob of super glue in the required place then put the hinge on top. The slightest wiggle releases the hinge. After priming and top coat no marks are visible where the blade must have cut sligthly into the surface. 1 3 Link to post Share on other sites More sharing options...
Popular Post Signaller69 Posted February 15, 2021 Author Popular Post Share Posted February 15, 2021 The chassis has had the exhaust pipes picked out and the engine equipment given a dry brushing of silver. Interiors have had a blow over with dark grey paint. The DTCL uses the Hornby 110 moulding, cut lengthwise and widened by 3mm to better fill inside the bodyshell. New cab control desk were added. The roofs have had vents added and a coat of paint, and the yellow cab ends have been sprayed along with the headcode box etch. I feel all is coming together nicely now. 15 2 8 Link to post Share on other sites More sharing options...
Popular Post Signaller69 Posted February 19, 2021 Author Popular Post Share Posted February 19, 2021 The class 100 has had its blue coat applied. After a swap around of bogie frames, the front bogie still needs the coupling and mount removing. Elsewhere, having swapped my Replica long Mk.1 suburban for a short Bachmann one, this has had a coat of blue at the same time as the 100, in readiness for use on "Dunnington". It was pointed out some time ago that my trusty old Highland 24/1had incorrect Drivers side windows so these have now been corrected to the sideways sliding type. Talking of 24s, a SLW un-numbered loco has joined the fleet, so with the Bachmann 24/1 I now have 2 new identities to sort. Plenty to do as always! 19 1 Link to post Share on other sites More sharing options...
luckymucklebackit Posted February 20, 2021 Share Posted February 20, 2021 Pedantic point Geoff, but I am almost certain that the Scottish based non corridor Mk1s didn't last long enough to carry blue livery, happy to be proved wrong, and of course rule 1 will apply Jim 1 Link to post Share on other sites More sharing options...
Signaller69 Posted February 20, 2021 Author Share Posted February 20, 2021 (edited) 59 minutes ago, luckymucklebackit said: Pedantic point Geoff, but I am almost certain that the Scottish based non corridor Mk1s didn't last long enough to carry blue livery, happy to be proved wrong, and of course rule 1 will apply Jim Jim, Fear not, that coach is for my "Dunnington" layout; the DVLR used one with a couple of BR Mk.1s for their steam service in 1977. It just made sense to spray it at the same time as the DMU. Martyn. Edited February 20, 2021 by Signaller69 2 1 1 Link to post Share on other sites More sharing options...
leopardml2341 Posted February 21, 2021 Share Posted February 21, 2021 16 hours ago, Signaller69 said: Jim, Fear not, that coach is for my "Dunnington" layout; the DVLR used one with a couple of BR Mk.1s for their steam service in 1977. It just made sense to spray it at the same time as the DMU. Martyn. The swapped coach came from yours truly, as I wanted a long one to make a centre car for my 2H unit. Now if I'd known you were going to spray it blue, Martin, I could've sent you a blue one! Conversely, I should've waited then you could've sprayed the green body, that you sent me, blue as I'll be doing that anyway 3 Link to post Share on other sites More sharing options...
Signaller69 Posted February 21, 2021 Author Share Posted February 21, 2021 3 minutes ago, leopardml2341 said: The swapped coach came from yours truly, as I wanted a long one to make a centre car for my 2H unit. Now if I'd known you were going to spray it blue, Martin, I could've sent you a blue one! Conversely, I should've waited then you could've sprayed the green body, that you sent me, blue as I'll be doing that anyway Indeed it did Andy, thankyou again! Never mind, had I known you wanted yours in blue I could have done that too! Hey ho! 1 Link to post Share on other sites More sharing options...
Signaller69 Posted February 21, 2021 Author Share Posted February 21, 2021 Talking of Mk.1 suburban stock, I need to check what colour the seating was in the 70s. Will have to dig the Mk.1 "bible" out later. Link to post Share on other sites More sharing options...
leopardml2341 Posted February 21, 2021 Share Posted February 21, 2021 5 hours ago, Signaller69 said: Talking of Mk.1 suburban stock, I need to check what colour the seating was in the 70s. Will have to dig the Mk.1 "bible" out later. IIRC it was the black/grey stripey stuff with pastel colour blocks; there is a name for it, but for the life of me I can't remember...... 1 Link to post Share on other sites More sharing options...
BernardTPM Posted February 21, 2021 Share Posted February 21, 2021 'Trojan'. 2 2 1 Link to post Share on other sites More sharing options...
leopardml2341 Posted February 21, 2021 Share Posted February 21, 2021 4 minutes ago, BernardTPM said: 'Trojan'. Thanks Bernard, as soon as I read that; a 'yeah that's it' moment. 2 Link to post Share on other sites More sharing options...
Popular Post Signaller69 Posted February 25, 2021 Author Popular Post Share Posted February 25, 2021 Transfers have been applied along with the headcode box surrounds and Hornby class 110 exhausts (on the DMBS) and gangways. Lavatory water pipes still need adding to the roof/ends of the DTC, to wrap around the track pin which will form the inlet. 23 4 Link to post Share on other sites More sharing options...
Gibbo675 Posted March 3, 2021 Share Posted March 3, 2021 Hi Martyn, Look what I found, at 27:20 : Gibbo. 4 1 Link to post Share on other sites More sharing options...
Signaller69 Posted March 3, 2021 Author Share Posted March 3, 2021 1 hour ago, Gibbo675 said: Hi Martyn, Look what I found, at 27:20 : Gibbo. Hi Gibbo, Very enjoyable video, Spalding is a station I am unfamiliar with but it did seem to get some variety back in the day. The Class 100 looks to be 'York Saloon' DB975349 (ex-561116)+DB975539 (ex-56101) which wasn't withdrawn until 1993. The class 56 on Presflos looks somewhat odd to me, I thought these wagons were vac braked only but clearly not. The 31 shunting the breakdown train made some delightful noise too! Thanks, Martyn. Link to post Share on other sites More sharing options...
Signaller69 Posted March 3, 2021 Author Share Posted March 3, 2021 The Class 100 has had glazing and roof water pipes added on the DTC. A simple bar coupling was made from plasticard, which is screwed to the DTC rear bogie. The peg locates in the original bogie coupling fixing hole on the DMBS. Just door handrails & handles, bufferbeam detail and windscreen wipers to add now. 10 5 Link to post Share on other sites More sharing options...
Gibbo675 Posted March 3, 2021 Share Posted March 3, 2021 3 hours ago, Signaller69 said: Hi Gibbo, Very enjoyable video, Spalding is a station I am unfamiliar with but it did seem to get some variety back in the day. The Class 100 looks to be 'York Saloon' DB975349 (ex-561116)+DB975539 (ex-56101) which wasn't withdrawn until 1993. The class 56 on Presflos looks somewhat odd to me, I thought these wagons were vac braked only but clearly not. The 31 shunting the breakdown train made some delightful noise too! Thanks, Martyn. Hi Martyn, The Presflo's are the larger variant that were built for transporting fly ash from power stations, the ash is used for building blocks and gypsum plaster boards. The hopper body is two panels longer and they run on a 12' 6" wheel base frame set which is 18' 6" over headstocks. There were both vacuum and air braked versions classed as CSV and CSA, see below: https://paulbartlett.zenfolio.com/brflyashpresflocsv/hbed8c95#hbed8c95 https://paulbartlett.zenfolio.com/brflyashcsa Here is one I built earlier: I did a drawing for a 3d print for one but my assistant hasn't got around to translating it to CAD yet with things being as they are. Gibbo. 1 1 Link to post Share on other sites More sharing options...
Signaller69 Posted March 3, 2021 Author Share Posted March 3, 2021 47 minutes ago, Gibbo675 said: Hi Martyn, The Presflo's are the larger variant that were built for transporting fly ash from power stations, the ash is used for building blocks and gypsum plaster boards. The hopper body is two panels longer and they run on a 12' 6" wheel base frame set which is 18' 6" over headstocks. There were both vacuum and air braked versions classed as CSV and CSA, see below: https://paulbartlett.zenfolio.com/brflyashpresflocsv/hbed8c95#hbed8c95 https://paulbartlett.zenfolio.com/brflyashcsa Here is one I built earlier: I did a drawing for a 3d print for one but my assistant hasn't got around to translating it to CAD yet with things being as they are. Gibbo. Thanks for that Gibbo. My first thought was they could be fly ash hoppers but (on my phone) they looked like "standard sized" Presflos, obviously I was deceived! Cheers, Martyn. Link to post Share on other sites More sharing options...
Signaller69 Posted March 3, 2021 Author Share Posted March 3, 2021 As a break from the DMU, I tackled lowering a Hornby class 25 today; regulars may recall I rebuilt the fuel tank area a while back, along with rebuilding the trailing bogie, but it still sat too high, despite closing the gap between bogies and chassis (by removing the odd off-centre trailing bogie moulded pivot, and the top of the bogie locating lugs) . I have seen comments that 25's "don't have solebars" as such, and that this is why the 25 body sits too high; the obvious solution is to lower the body on the chassis/ solebars. This means losing the clear Hornby glazing insert, but I had already done this when flush glazing was fitted. Inside the body, 1mm or so was trimmed from the bottom of the 4 cab doors, with, on the chassis, a similar amount of "flat" bufferbeam removed above the buffers, to match the upper chassis front profile, in order that it sits higher inside the bottom edge of the cab. The 4 lugs which locate in the cab doors were also removed. And that's about it. Once test fitted, the body was fixed back in place with a couple of small spots of epoxy resin on the chassis sides (enough to hold it in place but not make it impossible to get the body off in future if need be - bearing in mind the power and trailing bogies simply pull out for maintainence). Visually it looks a lot better now and matches my SLW class 24 in height (if not the fine detail or finish!) Some touching in of paint was also done whilst the loco was on the bench, all in all quite a pleasant diversion. I do have a soft spot for the Hornby 25 and could see me doing more of them in a similar fashion. 9 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now