SGJ Posted January 15, 2022 Author Share Posted January 15, 2022 I have had a small operating session with some of my sprinters and a practice with a class 37 going onto the depot The results are on youtube ( link bellow ). https://youtu.be/RHPV7F97zYE Link to post Share on other sites More sharing options...
SGJ Posted January 15, 2022 Author Share Posted January 15, 2022 I am thinking of scenery near the signal box, the idea is to have a embankment with trees on it so will be quite simple, the alternative is to have a set of low relief factory's, I am liking the greenery the most. 4 Link to post Share on other sites More sharing options...
SGJ Posted January 16, 2022 Author Share Posted January 16, 2022 A video again with a pair of 20s, a 90, two 150`s and two 47s The fiddle yard is getting bigger next weekend, currently its 6 roads, It will be 8 roads when I`m done, hopefully with point motors added to the far end ( it could even be done through the week depending on the daughters homework for the GCSE`s ). Oh yes, the video... 2 Link to post Share on other sites More sharing options...
SGJ Posted January 22, 2022 Author Share Posted January 22, 2022 Just added the extra two roads for Mulberry Junction bringing the fiddle yard from six lines to eight, four on the up, and four on the down. I also used a shortened MGR rake to check if there would be derailments, If anything were to come off the rails it would be them old HAA`s 1 Link to post Share on other sites More sharing options...
SGJ Posted February 5, 2022 Author Share Posted February 5, 2022 The Hornby 7 car APT came yesterday, I unboxed it today and gave it a test run, I need to put decoders in the driving trailers, at the moment it just has one in the power car. I`m not so keen on the pantograph. The set on youtube, and photos bellow 4 Link to post Share on other sites More sharing options...
SGJ Posted February 13, 2022 Author Share Posted February 13, 2022 Its nearly time to start ballasting the layout, I have just had a little play before the stones go down Mulberry Junction 13 February 2022 includes new APT 3 Link to post Share on other sites More sharing options...
SGJ Posted February 13, 2022 Author Share Posted February 13, 2022 I have just made a start on the station area`s ballasting 2 Link to post Share on other sites More sharing options...
SGJ Posted February 15, 2022 Author Share Posted February 15, 2022 A little more progress with ballasting. Tomorrow hopefully will be the far curve behind the depot 2 Link to post Share on other sites More sharing options...
Rich Papper Posted February 15, 2022 Share Posted February 15, 2022 A very neat looking job - well done. Rich 1 Link to post Share on other sites More sharing options...
SGJ Posted February 19, 2022 Author Share Posted February 19, 2022 I have decided to re do the ballasting, before it goes down again I am going to take a couple of inches away on the curve behind the depot, ( the track is close to a part of a frame for my roof ) to get continuity with the scenery a little better with the look of the layout overall hopefully. Link to post Share on other sites More sharing options...
SGJ Posted March 5, 2022 Author Share Posted March 5, 2022 Well the ballast went into the vacuum cleaner ( to be re used ), I have weathered the track and sprayed the bases of the fuel unloading area, and the fueling point too I have also done a video on youtube 3 Link to post Share on other sites More sharing options...
SGJ Posted March 7, 2022 Author Share Posted March 7, 2022 I have uploaded a "cab ride" of Mulberry Junction whilst the layout is clear of scenery and structures to hopefully compare in the future 1 Link to post Share on other sites More sharing options...
SGJ Posted March 13, 2022 Author Share Posted March 13, 2022 I have just finished weathering the track on Mulberry Junction, and added rust to the rail sides. Also its the first video that I am talking on https://youtu.be/Rc5AldIm91U Link to post Share on other sites More sharing options...
SGJ Posted March 13, 2022 Author Share Posted March 13, 2022 I have made a start on the overhead equipment, the first gantry for the station is done. I have also done a video 2 Link to post Share on other sites More sharing options...
SGJ Posted April 3, 2022 Author Share Posted April 3, 2022 A bit more progress on Mulberry Junction 2 Link to post Share on other sites More sharing options...
SGJ Posted April 25, 2022 Author Share Posted April 25, 2022 The ballasting is re done in a brown shade ( was grey ) which I like, It isn't stuck down yet but Its a bank holiday weekend so I might do that on Monday next week. I also bought a Silverfox class 89 model 😀 ( can be seen on the platform ) The grey version ballast The brown ballast 1 Link to post Share on other sites More sharing options...
SGJ Posted April 30, 2022 Author Share Posted April 30, 2022 I have been saving my money and got the new 91 model from Hornby 1 Link to post Share on other sites More sharing options...
SGJ Posted May 1, 2022 Author Share Posted May 1, 2022 My class 89 project is a bit further in its painting stage 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now