Satan's Goldfish Posted October 26, 2015 Share Posted October 26, 2015 (edited) I don't think I'm going crazy but I'm pretty sure I've seen on several occasions in the past rigid lorries like this: http://www.hankstruckpictures.com/pix/trucks/len_rogers/2007/05/scania-lockyer.jpg With a 20ft box on (as per the picture) pulling a drawbar trailer with 3 rigid axles that's carrying another 20ft box. Vehicle arrangement wheel wise like this: https://www.flickr.com/photos/fryske/4478984101 but I can't seem to find a picture lurking on the internet of this setup anywhere. Am I going crazy or do others remember this? I can understand why they're not as popular as 40ft articulated trailers, lack of flexibility on box size capability. The caption with the first picture even says it normally pulls a trailer, but I can't find a picture of said trailer! Help! Cheers Edited January 31, 2016 by Satan's Goldfish Link to post Share on other sites More sharing options...
Arthur Posted October 26, 2015 Share Posted October 26, 2015 This kind of thing? 3 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted October 27, 2015 Author Share Posted October 27, 2015 This kind of thing? image.jpg cheers Arthur, you're my new favorite person! Yes just like that. 1 Link to post Share on other sites More sharing options...
Fat Controller Posted October 27, 2015 Share Posted October 27, 2015 We get a lot of these on the Tunnel; they're very popular with the big parcels carriers, such as DPD and DHL. The ones we get normally carry a pair of the shorter (6.7m?) swap-bodies, but I sometimes see them with ISO boxes. Earlier versions use two axles (one rigid, one steerable), but I've noticed a move towards three rigid axles in recent years. Link to post Share on other sites More sharing options...
Satan's Goldfish Posted October 27, 2015 Author Share Posted October 27, 2015 We get a lot of these on the Tunnel; they're very popular with the big parcels carriers, such as DPD and DHL. The ones we get normally carry a pair of the shorter (6.7m?) swap-bodies, but I sometimes see them with ISO boxes. Earlier versions use two axles (one rigid, one steerable), but I've noticed a move towards three rigid axles in recent years. those sound like the sort I've noticed now I've been actively looking for them, but normally with a fixed body (Argos!) rather than containers. The 'plan' is to add some variation to my container lorry fleet by matching a suitable prime mover from Oxford Diecast with just the back half of their detachable container trailer using the existing connecting bar as the drawbar. But I wanted to make sure I hadn't just imagined the arrangement first. (That's another 1 for the project pile then!) 1 Link to post Share on other sites More sharing options...
Fat Controller Posted October 27, 2015 Share Posted October 27, 2015 those sound like the sort I've noticed now I've been actively looking for them, but normally with a fixed body (Argos!) rather than containers. The 'plan' is to add some variation to my container lorry fleet by matching a suitable prime mover from Oxford Diecast with just the back half of their detachable container trailer using the existing connecting bar as the drawbar. But I wanted to make sure I hadn't just imagined the arrangement first. (That's another 1 for the project pile then!) You'll probably find, if you look closely, that many of the 'Argos' and similar trailers are also 'demountables'. They don't have the Twistlocks or reinforced lifting pockets of normal containers and swap-bodies; rather, they have strengthened floors, and legs that fold up and down. With these, the lorry and drag drop off the bodies at the distribution hub, and pick up loaded ones; it means that expensive 'rolling stock' doesn't stand around waiting to be loaded all day. Bodies are simply moved around the site by a 'shunter' as required. Trunk and delivery drivers simply pick up their new load from a row of identical bodies; what could possibly go wrong? Well, there was a friend of mine who turned up late at a badly lit depot, swapped bodies, then discovered (at her first drop, 150 miles away) that the one she'd picked up was empty. Link to post Share on other sites More sharing options...
Richard Pike Posted October 27, 2015 Share Posted October 27, 2015 Drawbar trailers are limited in their versatility by the fact they can only carry 20' boxes, which is good for domestic retail deliveries, such as Argos etc as mentioned above but restrictive in Intermodal operations where a standard arctic skeletal trailer can carry anything from a 10' - 45' Box. Drawbar trailers are also notably much harder to manoeuvre requiring a much bigger turning area, especially for reversing. Retail deliveries favour swap bodies on 20' chassis / drawbar arrangements, this allows them to drop off the trailer and just use the 20" chassis to deliver to shops with restricted delivery facilities, i.e. high streets, the driver can then swap the trailer body for the chassis at a suitable area if needed and repeat the delivery process. This is not possible with Intermodal boxes. Link to post Share on other sites More sharing options...
Satan's Goldfish Posted October 29, 2015 Author Share Posted October 29, 2015 Passed 1 today on the A421, just like I remember seeing previously, proper exciting moment! Then I had to have words with myself for finding that a proper exciting moment. Ah well, to ebay for an unwilling victim to butcher! Link to post Share on other sites More sharing options...
simon47603 Posted November 6, 2015 Share Posted November 6, 2015 (edited) Maritime used to use DrawBar & Trailers on Container Traffic. The image posted by Arthur is of an Ex- Maritime Wagon. They have since fallen out of favour for this type of Multi-functional Trailer which can be split into two separate trailers. http://www.dennisontrailers.com/multi-function Edited November 6, 2015 by simon47603 Link to post Share on other sites More sharing options...
45059 Posted November 7, 2015 Share Posted November 7, 2015 From what I've witnessed over the past 11 years on the dock, hauliers seem to struggle to remember to set their twistlocks to the correct position, (trying to accept a 45' box without flipping out the extendable pins springs to mind)- let alone the confusion with the telescopic trailers. So the splitting trailer as per simon47603's post should provide hours of amusement for the casual observer of a wagon driver scratching his head! I do still see the wagon and drags as mentioned in the OP but as has been eluded to, they are very much in the minority. Ps. I'm not picking on lorry drivers- my late father was one for the better part of 30 years, but some I've seen I wouldn't trust to tie their own shoes!! 1 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted December 2, 2015 Author Share Posted December 2, 2015 In other drawbar container lorry news, are there any other versions of this monster around the UK? I'm going to have to add one of these to my fleet......probably not in pink though.... http://wjriding.m.webs.com/site/mobile?dm_path=%2Fthebeast.htm&fw_sig_premium=1&fw_sig_access_token=e25e2bc0bd266488a4bcbd7f1ee72d445b6f1f80&fw_sig_potential_abuse=1&fw_sig_partner=webs&fw_sig_site=86644616&fw_sig_social=1&fw_sig_url=http://wjriding.webs.com/&fw_sig=84bc2cc79613b861a0f1e2ed140110f8&fw_sig_locale=en-US&fw_sig_tier=1&fw_sig_time=1449076251901&fw_sig_session_key=b2f00cf42267967be6afc9cbc4d18e04bf072fbcf7d4ee3dba9746770c007fd3-86644616&fw_sig_api_key=522b0eedffc137c934fc7268582d53a1&fw_sig_is_admin=0&fw_sig_permission_level=0&fw_sig_permissions=none&fb_sig_network=fw 1 Link to post Share on other sites More sharing options...
Arthur Posted December 2, 2015 Share Posted December 2, 2015 As it was built for a specific traffic on a specific route I doubt that there is anything quite the same elsewhere. There are certainly a few drawbar tractors converted from artic tractors about. If you like something big and different, I saw this on Sunday evening; http://www.rmweb.co.uk/community/index.php?/topic/105576-modern-showmans-road-train/ Link to post Share on other sites More sharing options...
Satan's Goldfish Posted December 2, 2015 Author Share Posted December 2, 2015 As it was built for a specific traffic on a specific route I doubt that there is anything quite the same elsewhere. There are certainly a few drawbar tractors converted from artic tractors about. If you like something big and different, I saw this on Sunday evening; http://www.rmweb.co.uk/community/index.php?/topic/105576-modern-showmans-road-train/ I like that. Always accepted that full Aussie Road Train would be too much to justify for UK, but rule 1 could be invoked there with a 20 40 20 set up...... 2 Link to post Share on other sites More sharing options...
Theo C. Cupier Posted January 7, 2016 Share Posted January 7, 2016 Re drawbar units, a local bed manufacturer uses a fleet of swap-body units. The only pic I can find is of one of the fleet having had a little mishap. Link to post Share on other sites More sharing options...
RMweb Premium PhilJ W Posted January 7, 2016 RMweb Premium Share Posted January 7, 2016 In other drawbar container lorry news, are there any other versions of this monster around the UK? I'm going to have to add one of these to my fleet......probably not in pink though.... http://wjriding.m.webs.com/site/mobile?dm_path=%2Fthebeast.htm&fw_sig_premium=1&fw_sig_access_token=e25e2bc0bd266488a4bcbd7f1ee72d445b6f1f80&fw_sig_potential_abuse=1&fw_sig_partner=webs&fw_sig_site=86644616&fw_sig_social=1&fw_sig_url=http://wjriding.webs.com/&fw_sig=84bc2cc79613b861a0f1e2ed140110f8&fw_sig_locale=en-US&fw_sig_tier=1&fw_sig_time=1449076251901&fw_sig_session_key=b2f00cf42267967be6afc9cbc4d18e04bf072fbcf7d4ee3dba9746770c007fd3-86644616&fw_sig_api_key=522b0eedffc137c934fc7268582d53a1&fw_sig_is_admin=0&fw_sig_permission_level=0&fw_sig_permissions=none&fb_sig_network=fw That is a conventional skeletal trailer with a 'dolly', a short trailer with a fifth wheel between it and the tractive unit. Oxford now make a drawbar unit with a three axle trailer that can be modified to represent a container trailer. This has the advantage of having the correct towing bar that attaches to the towing vehicle near to the back axle. Link to post Share on other sites More sharing options...
Satan's Goldfish Posted January 7, 2016 Author Share Posted January 7, 2016 That is a conventional skeletal trailer with a 'dolly', a short trailer with a fifth wheel between it and the tractive unit. Oxford now make a drawbar unit with a three axle trailer that can be modified to represent a container trailer. This has the advantage of having the correct towing bar that attaches to the towing vehicle near to the back axle. Off to the Oxford website! The other issue with that skelly trailer is it's a 30ft rather than the the more conventional 40ft. Unfortunately my only 30ft trailer for bulktainers has the hydraulic gear fitted for tipping the container up (it was a custom build by Mick Lawrence for me). I am torn between creating a representation of that drawbar dolly unit for 30s or just going completely 1-off bespoke creating my own unit transporting 20ft and 40ft boxes from the cranes to the stacks road-train style...... or both! 1 Link to post Share on other sites More sharing options...
Nile_Griffith Posted January 7, 2016 Share Posted January 7, 2016 I'll tell you now a 32 ton rigid with a drag is a complete swine when it comes to getting around town!!! Will admit to having completely flouted the law on driving one, but in fairness it was in "Johnny Foreigner Land" and I was happy that the local 5 O' would have sold me a temporary license if I had required one at short notice...... Ha ha Ha! Some of the show trucking companies are using them but only on "Jobs" where they can be pretty confident of the route to the venue and the load in. As mentioned in earlier posts as a formation they require a lot more wiggle room than forty footers and when it comes to reversing............... Well you have to have your wits about you. From a modelling point of view having one on your layout means it's either got to be on a straight piece of road or whatever area of hard standing you have it placed on is going to need airfield proportions, otherwise you run the risk of some commentator informing you in their adenoidal rage that "Oh i think you'd find that your vehicle would be well and truly marooned if that was in the real world.......nnnnnnnnnnnnnnnneeeehhhhhhh". 1 Link to post Share on other sites More sharing options...
Satan's Goldfish Posted January 7, 2016 Author Share Posted January 7, 2016 I'm starting a 'prototype for everything' folder to take around with me full of pictures to conveniently slap people with that clearly think they know better before informing them to take their negative views elsewhere and end with the comment 'it's just a fictional model, you massive ######'. It'll be fun! Link to post Share on other sites More sharing options...
Satan's Goldfish Posted January 31, 2016 Author Share Posted January 31, 2016 (edited) On the drive down to the Canterbury show last weekend, we passed this (Taken with Mrs SGs iphone, so my apologies if they appear the wrong way up).Also, I'm not sure how to post or tag it onto here but Dan of Dan's Dirty Diesels sent me a video on Facebook of a B unit in Holland linking together and carrying 3x 20ft containers. Search for Peke Spiiberg on there and look at his videos and you should find it. - Edit: unit pic like this: http://www.commercialmotor.com/big-lorry-blog/longher-heavier-vehicles-on-bi Edited February 1, 2016 by Satan's Goldfish 1 Link to post Share on other sites More sharing options...
SD45T-2 Posted November 28, 2016 Share Posted November 28, 2016 You'll probably find, if you look closely, that many of the 'Argos' and similar trailers are also 'demountables'. They don't have the Twistlocks or reinforced lifting pockets of normal containers and swap-bodies; rather, they have strengthened floors, and legs that fold up and down. With these, the lorry and drag drop off the bodies at the distribution hub, and pick up loaded ones; it means that expensive 'rolling stock' doesn't stand around waiting to be loaded all day. Bodies are simply moved around the site by a 'shunter' as required. Trunk and delivery drivers simply pick up their new load from a row of identical bodies; what could possibly go wrong? Well, there was a friend of mine who turned up late at a badly lit depot, swapped bodies, then discovered (at her first drop, 150 miles away) that the one she'd picked up was empty. I know of a driver who picked up one of these bodies (not an ARGOS one) that was turned the wrong way round. He only discovered there was a problem after unloading the device at the destination. From all accounts neither he nor the recipient was very happy. 2 Link to post Share on other sites More sharing options...
Stormbringer Posted May 25, 2019 Share Posted May 25, 2019 There are still a few about. I can think of 2 that work out of Southampton and I'm sure there are some that work out of Felixstowe. Pete 1 Link to post Share on other sites More sharing options...
Stormbringer Posted May 25, 2019 Share Posted May 25, 2019 Part of what I run around with. Mislaid the back half somewhere. Pete 1 1 Link to post Share on other sites More sharing options...
ElectroSoldier Posted October 10, 2020 Share Posted October 10, 2020 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now