RBE Posted September 28, 2015 Author Share Posted September 28, 2015 (edited) I can understand where you are coming from as you have a lot of different traffic to cater for. However, I can see a shopping list including a mixed pair of 20s, several 31s, 37s, 47s, Blue, Original Railfreight and Large Logo Grids, more 58s and a couple more 60s....get playing the lottery! Some Coal 60s were also regularly seen on Metals workings too. I know 004 was used on Steel. Like you, I have quite a few locos that I would like to have on Boxenby but first off need to sort out the every day prototypical fleet! Yes I do need to win the lottery. I never realised the scope of stock at BoT when I decided to do it. Oh well you make your bed! At least Millers Dale will be heavily stocked when the time comes! Looking good mateCheers Buddy I'm sure you'll have fun shunting the yard! Might have to make you official engineers shunter! Edited September 28, 2015 by RBE Link to post Share on other sites More sharing options...
Removed a/c Posted September 28, 2015 Share Posted September 28, 2015 or what about a blue one and a heavily weathered green one. I was watching a youtube video where it said some 20s never made it past the green paint stage. They were well worn and filthy, could hardly tell they were green !! Link to post Share on other sites More sharing options...
RBE Posted September 28, 2015 Author Share Posted September 28, 2015 Clearly there weren't any in green in the 1990s! Link to post Share on other sites More sharing options...
RBE Posted September 28, 2015 Author Share Posted September 28, 2015 Except maybe the tinsley special ones in brunswick green if they lasted that long but not in original green! Link to post Share on other sites More sharing options...
mason Posted September 28, 2015 Share Posted September 28, 2015 Cheers Buddy I'm sure you'll have fun shunting the yard! Might have to make you official engineers shunter! Sounds good to me 1 Link to post Share on other sites More sharing options...
RBE Posted October 5, 2015 Author Share Posted October 5, 2015 (edited) Ok just checking in to let you all know that I go in for my spinal operation tomorrow morning. I will be having one of my discs taken out and its a risky op so am a little nervous to say the least. I will check back in when I'm well again. Cheers Cav Edited October 5, 2015 by RBE Link to post Share on other sites More sharing options...
Andrew P Posted October 5, 2015 Share Posted October 5, 2015 All the best mate, I hope it all goes O.K. for you and we see you back on here before the end of the week for an update. Link to post Share on other sites More sharing options...
RBE Posted October 5, 2015 Author Share Posted October 5, 2015 Cheers Buddy. I will of course update you all once I'm able however it wont be on the pc as I cant sit for 6 weeks but I'm sure it will be much better once its done. Link to post Share on other sites More sharing options...
sdw7300 Posted October 6, 2015 Share Posted October 6, 2015 Best of luck, Cav. Really hope it sorts the pain. Link to post Share on other sites More sharing options...
Guest bri.s Posted October 6, 2015 Share Posted October 6, 2015 All the best cav and good luck ,hope it's a complete successes Brian Link to post Share on other sites More sharing options...
georgeT Posted October 6, 2015 Share Posted October 6, 2015 All the very best Cav, good luck... Link to post Share on other sites More sharing options...
cornish trains jez Posted October 6, 2015 Share Posted October 6, 2015 Good luck matey. I'm sure all will be fine. Link to post Share on other sites More sharing options...
RBE Posted October 6, 2015 Author Share Posted October 6, 2015 Thanks chaps. Just laid waiting to be taken down. Getting too close for comfort now!! Link to post Share on other sites More sharing options...
P.C.M Posted October 6, 2015 Share Posted October 6, 2015 Hi Cav, Hope all goes well, and you are back modelling soon and pain free while doing it. All the best Peter. Link to post Share on other sites More sharing options...
RBE Posted October 6, 2015 Author Share Posted October 6, 2015 Ok I've come out of the far side. I seem to be ok. The backs very painful if course and I'm on morphene but the leg is feeling much better at the moment. Fingers crossed. Thanks for all of your best wishes it means a lot, currently I have more wire pipes and add ons than a borg but I just happy that it went ok. Link to post Share on other sites More sharing options...
branchie Posted October 6, 2015 Share Posted October 6, 2015 Good luck with the recovery Cav. Take care. Christian. Link to post Share on other sites More sharing options...
Grimleygrid Posted October 6, 2015 Share Posted October 6, 2015 It's good to hear that everything went well Cav and best wishes for your recovery. I am putting something in tomorrow's post for you which might help take your mind off things! Link to post Share on other sites More sharing options...
RBE Posted October 7, 2015 Author Share Posted October 7, 2015 I'm back home now and in a bit of pain. The good sign is that the leg pain has gone so it appears the operation has worked. I will hopefully make a fast recovery now over the coming weeks. 5 Link to post Share on other sites More sharing options...
georgeT Posted October 7, 2015 Share Posted October 7, 2015 Thats great news Cav, now take it easy and rest... Link to post Share on other sites More sharing options...
RBE Posted October 7, 2015 Author Share Posted October 7, 2015 Cheers George. I'm planning to. Its hard when there is so much modelling to do! Haha Link to post Share on other sites More sharing options...
Andrew P Posted October 7, 2015 Share Posted October 7, 2015 I'm back home now and in a bit of pain. The good sign is that the leg pain has gone so it appears the operation has worked. I will hopefully make a fast recovery now over the coming weeks. Great News Cav, now take it easy, there's no rush to finish the Layout, just rest and enjoy the Pain Free feeling. Link to post Share on other sites More sharing options...
cornish trains jez Posted October 8, 2015 Share Posted October 8, 2015 Hi matey, Great news! Hope you make a speedy recovery. Best regards, Jeremy Link to post Share on other sites More sharing options...
Removed a/c Posted October 10, 2015 Share Posted October 10, 2015 Wishing you a speedy recovery !! Link to post Share on other sites More sharing options...
RBE Posted October 19, 2015 Author Share Posted October 19, 2015 (edited) Not really anything to do with BoT appart from I'll be running it on there, today I spent half an hour finishing off assembling and painting my 3D printed perch. It could do with some data panels and a good weathering but the idea is defineately there. It would be good to see a rake of these with the gantry wagon and chute wagon on BoT! I'm happy enough with it to put it for sale in my shapeways shop. Once I have done the whole rake I will look into providing full kits for these however just for now you can buy the basic print if you are interesting in having a go with one. Edited October 19, 2015 by RBE 5 Link to post Share on other sites More sharing options...
87023Velocity Posted October 19, 2015 Share Posted October 19, 2015 Hi Cav, Very nice indeed. I think a rake of those on Burton (and Millers Dale) will look superb. Cheers Simon Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now