Last brass to Viking...
I got an hour clear to spend on Viking today...
I only had a few parts left to fit in brass, namely the hooks on the buffer beans and the foot steps. These went on without too much drama, using low melt solder and holding the parts with tweezers or pliers whilst the solder took a second to cool.
The steps at the front are formed from two pieces, but went together with ease. There are no locating half etches on the underframe for either the front or back but they went on ok, but I did have to keep tweaking them until the were straight, they're not perfect but the advantage is how strongly attached they are over the superglued ones on Wasp.
Next I'll start building an axle box assembly and then see if I can take a mould from it to cast my the four I need, or whether it will be just as easy to build them all by hand.
- 3
3 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now