Callow Lane - the ballasting continues
More work has been done in the last few weeks on the ballasting. It should be borne in mind that although the ballast currently looks quite pristine, this is a goods-only line in the early-mid 1960s, and there is still grot, cinder/mud effects and weed growth to add. Some of the sleepers haven't yet been weathered and most of the rail sides will need more weathering as well. Also, the actual point rodding has yet to be installed.
The general method of ballasting the full-depth sleepers of the P4 Track Co/Exactoscale track is to apply the loose, dry ballast, dampen with IPA alcohol and drop Klear onto the tops of the sleepers with a pipette type thing.
First of all, some views of the ballast, which has been tamped but not yet dampened or had the Klear applied:
Shortly after taking the above photos, I applied the Klear. Until the Klear has dried out, the whole thing looks horrible to my eyes, as despite the IPA (which is supposed to help the Klear spread without disturbing the ballast), a fair number of ballast disturbances inevitably occur....
This is the simple tamping tool that I use to tamp the loose ballast down (thanks to Re6/6 for his suggestion with this one):
Here is a bit of plain track, which has had the Klear treatment, and some of the irregularities smoothed out:
Here is another section of plain line, in this case, the running line towards Coalpit Heath:
I've found that I've had to be extra careful in the area around point blades when applying the Klear, in order not to gum the whole lot up solid. I've inserted thin strips of grease-proof paper (thanks to Will Vale for that suggestion) between the blades and the slide chairs, which seems to have helped.
In the case of the 3-way point with it's copper-clad sleepers, the lower depth of the sleepers meant that I could use my normal 'Captain's Method' of applying the PVA neat between the sleepers with a small paintbrush and applying the ballast dry from above, vacuuming the rest off when the PVA has dried. I much prefer this method generally for the better control it gives you when ballasting, although it is very time-consuming as well (but possibly not as time-consuming or as fraught as trying to get all the loose ballast neat with a tamping tool and a small brush!).
This is the 3-way point:
Most of the sidings on the layout will feature a cinder/mud type of 'ballast', up to (or almost up to) the sleeper tops, with weed growth etc. Some 'mud/cinders' (in the form of Humbrol Air Clay - thanks to Chris Nevard for that one!) will also be applied on areas where there is currently 'pristine ballast', so that 'ballast effects' will be seen poking through the mud and the grot. The principle is that the main running lines would have had some ballast to start with (although it is mostly pretty grotty by now), whereas the sidings would not have.
Despite appearances, there are no ballast shoulders on the layout, and more 'cinders/mud' type grot will abut the ballasted areas and merge with same.
10 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now