Light on...Light off...
Happy Christmas all,
A quick update on the Brake Van kit started previously. Prior to painting I wanted to explore installing a working tail lamp. After various searches I found one by ModelYard and after a few helpful email exchanges with Rob, he sent me a kit and a wiring diagram. The intention was to power the lamp from the track using wipers on the wheels fashioned from a kit previously bought at a show.
The lamp was set up and various wires fed through to the underside of the chassis to link up with the pickup arrangement. This then proved to be troublesome as I found it difficult to get the spring action of the wire against the inside of the wheels. The lamp was on when on the track but upon moving the BV they slipped off and the lamp flickered...but not in a good flicker way! So a quick reorganisation the day after with the wires trailing on the top of the wheels...again, the same result
So after another conversation with Rob, I decided to go old School and run it off a small battery but with a small inline switch that Rob provided. For this to happen I had to modify the roof to make it removable to access. This needed to be done anyway as the sides were bowing inwards. A few experiments with various layers of plasticard enables the roof to now slot in and out, whilst realigning the sides.
I also took advantage to remove the curved rain strips to the roof which was subject to comments on the last post. So now it can move to the paint shop.
Rob of ModelYard was very helpful and should I require more lamps I won’t hesitate to go back to him.
As always, comments welcome...
Pete
Roof removed - the bowed sides can be seen...
The crude inserts which enable the roof to sit properly...
Light off...
Light on...
- 5
8 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now